“Xps13”的版本间的差异

来自linux中国网wiki
跳到导航 跳到搜索
→‎bios
 
(未显示同一用户的57个中间版本)
第1行: 第1行:
 
  [[category:desktop]]
 
  [[category:desktop]]
 +
=散热=
 +
特别是夏天 真的得注意
 +
戴尔祖传的散热方式,不到一定温度风扇都不会转的,你要是嫌热可以去bios改风扇的转速的
 +
 +
[https://www.zhihu.com/question/278185491 八代u的xps13 9360怎么解决散热问题?]
 +
 +
[https://post.smzdm.com/p/az5e657o/  炎炎夏日,对XPS13老爷机进行散热改造 ]
 +
 +
=闪屏=
 +
 +
https://www.dell.com/community/Linux-General/XPS-13-7390-Ubuntu-Screen-flickering/m-p/7493592#M17301
 +
<pre>
 +
on debian 可行的 
 +
 +
Source:  https://ubuntuforums.org/showthread.php?t=2339302
 +
 +
Steps:
 +
 +
1. sudo (editor command) /etc/default/grub
 +
 +
2. Comment out this line:
 +
 +
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
 +
 +
3. Add this line instead:
 +
 +
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.enable_psr=0"
 +
 +
4. Save and close your editor
 +
 +
5. sudo update-grub
 +
</pre>
 +
 +
  今天也是会闪呢  22号    ,kali gnome3  闪屏 2020年 07月 22日 星期三 16:47:39 CST
 +
 +
  过了阵就闪屏 也就是像自动刷新  今天用了win也会  Thu Jul 16 10:51:31 CST 2020
 +
  今天改了  win 好像是好了呢 2020年 07月 21日 星期二 17:34:22 CST
 +
    kali 还是会闪 肿么办
 +
 +
2020年 07月 18日 星期六 22:02:04 CST 在吃饭时用 也是会的 过了阵就闪屏 也就是像自动刷新
 +
awesome debian 的会变 一下子黑暗呢  一下子亮
 +
  sudo apt-get purge xserver-xorg-video-intel  还是会闪 on debian testing
 +
 +
=长期使用=
 +
如果U 18能用  , 2020 现在的用法是最大分区 在 /home/evan/data 那就  原来的用户删除  然后 新的大分部 挂到 /home/evan  再创建新用户 用root登录  应该就可以了
 +
 +
=外置显示器=
 +
还是32的吧
 +
27 最好是type c 之类的 可以直接连接
 +
 +
 +
  DA300扩展坞 注解:移动适配器同时仅支持一台显示设备 使用说明见下面
 +
 +
 +
DA300 USB-C移动适配器不支持4K(60Hz时)
 +
摘要: 通过HDMI或DisplayPort连接至受支持的系统和监视器时,Dell DA300 USB-C移动适配器只能以60Hz输出4K分辨率。
 +
 +
 +
https://www.dell.com/support/home/zh-cn/product-support/product/dell-usbc-mobile-adapter-da300/docs
 +
 +
 +
[https://zhuanlan.zhihu.com/p/40738453 Type-C口的实用配件—Dell 戴尔 DA300扩展坞]
 +
 +
[https://zhuanlan.zhihu.com/p/365598053 2021-27寸2K/IPS显示器推荐/选购指南(7月更新)]
 +
 +
==支持同时多个显示器==
 +
[https://post.smzdm.com/p/anx7e4wv/  戴尔WD19TB——实用可靠的多平台扩展坞 ]
 +
 +
=2020=
 +
 +
[https://linux-hardware.org/?probe=460bfac7a1 linux-hardware#460bfac7a1 of Dell XPS 13 7390]
 +
 +
https://wiki.debian.org/InstallingDebianOn/Dell/Dell%20XPS%2013%207390
 +
 
=触摸板=
 
=触摸板=
  
第23行: 第97行:
 
== ==
 
== ==
  
=屏亮度=
+
=屏亮度 和电源管理 =
 +
 
 +
<pre>
 +
 
 +
或者直接拿出 电源管理器到 托盘就行了 右键就有了
  
 
cat  /sys/class/backlight/intel_backlight/brightness
 
cat  /sys/class/backlight/intel_backlight/brightness
 
12000
 
12000
 +
 +
ubntu 18.04 is 7200
  
 
直接打开 redshift
 
直接打开 redshift
 +
 +
xgamma -gamma .7
 +
 +
  sudo apt install tlp tlp-rdw  tp-smapi-dkms acpi-call-dkms linux-cpupower
 +
 +
终端输入代码:
 +
   
 +
sudo gedit /etc/default/grub
 +
 +
在打开文件中找到
 +
 +
GRUB_CMDLINE_LINUX=""
 +
 +
改成
 +
GRUB_CMDLINE_LINUX="acpi_backlight=vendor"
 +
 +
 +
改好后保存即可
 +
 +
然后升级grub:
 +
   
 +
sudo update-grub
 +
 +
重启之。。。按FN就能调节了
 +
</pre>
 +
https://www.jianshu.com/p/31d918c3272e
 +
 
=os=
 
=os=
 +
 +
==freebsd==
 +
https://wiki.freebsd.org/Laptops/Dell_XPS13_9360
 +
 +
==ubuntu18.04==
 +
这个 暂时可以用
 +
 +
[https://www.v2ex.com/t/665423?p=2 Ubuntu 20.04 LTS 升级踩坑分享]
 +
 +
[https://itsfoss.com/upgrade-ubuntu-version/ How to Upgrade to Ubuntu 20.04 from Ubuntu 18.04 and 19.10]
 +
 
==kali==
 
==kali==
  
第60行: 第178行:
  
 
==parrot==
 
==parrot==
 +
 +
2020年 03月 27日  mate 桌面测试 闪屏问题    已知  awesome会闪 
  
 
今天手贱再次升级的win10,又出了新情况。电脑只要空闲后屏幕关闭,恢复后就会闪。只有重起才能恢复。刷BIOS A03?我也试试
 
今天手贱再次升级的win10,又出了新情况。电脑只要空闲后屏幕关闭,恢复后就会闪。只有重起才能恢复。刷BIOS A03?我也试试
第65行: 第185行:
  
 
也会闪屏和  试用中  mate 还是会呢  关掉特效果好像不会了  大不了回去再安装个最新的  这个分区再格
 
也会闪屏和  试用中  mate 还是会呢  关掉特效果好像不会了  大不了回去再安装个最新的  这个分区再格
 +
 +
 +
这个是自动休眠导致的 如果是mate 在右下角  好像是公司网络问题  回家看会不会
 
wifi有时会断开 再重连接又可以了   
 
wifi有时会断开 再重连接又可以了   
  
第80行: 第203行:
 
  默认中文编码有问题 #新安装就行了 ,删除整天个/home
 
  默认中文编码有问题 #新安装就行了 ,删除整天个/home
  
==debian10 dvd==
+
==debian10 ==
安装了 进入不了GUI
+
debian10 dvd or  xfce 安装了 进入不了GUI 看一下 debian wiki是正常的,要安装别的kernel
 +
 
 +
https://wiki.debian.org/InstallingDebianOn/Dell/Dell%20XPS%2013%207390
 +
 
 +
<pre>
 +
This page describes Debian on the Dell XPS 13 9380 released in January 2019
 +
 
 +
# dmidecode | grep "Product Name"
 +
        Product Name: XPS 13 9380
 +
        Product Name: 0KTW76
 +
 
 +
BIOS Update
 +
 
 +
# dmidecode | grep "BIOS Revision"
 +
        BIOS Revision: 1.1
 +
 
 +
 
 +
deb https://mirrors.aliyun.com/debian/ buster-backports main contrib non-free
 +
deb-src https://mirrors.aliyun.com/debian/ buster-backports main contrib non-free
 +
 
 +
apt install linux-image-amd64/buster-backports wireless-regdb/buster-backports
 +
 
 +
sudo apt-get install fwupd
 +
 
 +
 
 +
参考 
 +
https://www.debian.cn/archives/45
 +
 
 +
 
 +
 
 +
 
 +
 
 +
#Power Management
 +
 
 +
apt install firmware-misc-nonfree
 +
 
 +
 
 +
0. 确保Debian能够联网
 +
 
 +
1. apt install x-window-system-core gnome-core  #安装最基本的gnome图形相关软件
 +
systemctl set-default graphical.target //设置成图形模式
 +
 
 +
2. init 6 #设置系统为图形界面启动,该命令执行后系统会重启
 +
 
 +
3. 设置系统可以root登录
 +
 
 +
    1) 修改/etc/gdm3/daemon.conf文件,在[security]下增加一行AllowRoot = true
 +
 
 +
    2)修改/etc/pam.d/gdm-password文件,注释掉auth required pam_succeed_if.so user != root quiet_success
 +
 
 +
    3)重启系统后,即可使用root登录。
 +
 
 +
 
 +
如果多个显示管理器被配置为分别管理不同的 X 服务器,那么它们可以同时运行。要做到这一点,您要按照需求分别对各显示管理器  │ 
 +
│ 进行设置,编辑它们在 /etc/init.d 目录下的 init 脚本,并且关闭对默认显示管理器的检查。                                  │ 
 +
│                                                                                                                        │ 
 +
│ 默认显示管理器: 
 +
 +
 +
 +
    82.286] (==) ModulePath set to "/usr/lib/xorg/modules"
 +
[    82.286] (II) The server relies on udev to provide the list of input devices.
 +
If no devices become available, reconfigure udev or disable AutoAddDevices.
 +
[    82.286] (II) Loader magic: 0x56144eb4fe20
 +
[    82.286] (II) Module ABI versions:
 +
[    82.286] X.Org ANSI C Emulation: 0.4
 +
[    82.286] X.Org Video Driver: 24.0
 +
[    82.286] X.Org XInput driver : 24.1
 +
[    82.286] X.Org Server Extension : 10.0
 +
[    82.287] (++) using VT number 2
 +
 
 +
[    82.288] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
 +
[    82.290] (--) PCI:*(0@0:2:0) 8086:9bca:1028:0962 rev 4, Mem @ 0x604a000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
 +
[    82.290] (II) LoadModule: "glx"
 +
[    82.290] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
 +
[    82.291] (II) Module glx: vendor="X.Org Foundation"
 +
[    82.291] compiled for 1.20.4, module version = 1.0.0
 +
[    82.291] ABI class: X.Org Server Extension, version 10.0
 +
[    82.291] (==) Matched modesetting as autoconfigured driver 0
 +
[    82.291] (==) Matched fbdev as autoconfigured driver 1
 +
[    82.291] (==) Matched vesa as autoconfigured driver 2
 +
[    82.291] (==) Assigned the driver to the xf86ConfigLayout
 +
[    82.291] (II) LoadModule: "modesetting"
 +
[    82.291] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
 +
[    82.291] (II) Module modesetting: vendor="X.Org Foundation"
 +
[    82.291] compiled for 1.20.4, module version = 1.20.4
 +
[    82.291] Module class: X.Org Video Driver
 +
[    82.291] ABI class: X.Org Video Driver, version 24.0
 +
[    82.291] (II) LoadModule: "fbdev"
 +
[    82.291] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
 +
[    82.291] (II) Module fbdev: vendor="X.Org Foundation"
 +
[    82.291] compiled for 1.20.0, module version = 0.5.0
 +
[    82.291] Module class: X.Org Video Driver
 +
[    82.291] ABI class: X.Org Video Driver, version 24.0
 +
[    82.291] (II) LoadModule: "vesa"
 +
[    82.291] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
 +
[    82.291] (II) Module vesa: vendor="X.Org Foundation"
 +
[    82.291] compiled for 1.20.1, module version = 2.4.0
 +
[    82.291] Module class: X.Org Video Driver
 +
[    82.291] ABI class: X.Org Video Driver, version 24.0
 +
[    82.291] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
 +
[    82.291] (II) FBDEV: driver for framebuffer: fbdev
 +
[    82.291] (II) VESA: driver for VESA chipsets: vesa
 +
[    82.291] (EE) open /dev/dri/card0: No such file or directory
 +
[    82.291] (WW) Falling back to old probe method for modesetting
 +
[    82.291] (EE) open /dev/dri/card0: No such file or directory
 +
[    82.291] (II) Loading sub module "fbdevhw"
 +
[    82.291] (II) LoadModule: "fbdevhw"
 +
[    82.291] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
 +
[    82.291] (II) Module fbdevhw: vendor="X.Org Foundation"
 +
[    82.291] compiled for 1.20.4, module version = 0.0.2
 +
[    82.291] ABI class: X.Org Video Driver, version 24.0
 +
[    82.291] (EE) Unable to find a valid framebuffer device
 +
[    82.291] (WW) Falling back to old probe method for fbdev
 +
[    82.291] (II) Loading sub module "fbdevhw"
 +
[    82.291] (II) LoadModule: "fbdevhw"
 +
[    82.291] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
 +
[    82.291] (II) Module fbdevhw: vendor="X.Org Foundation"
 +
[    82.291] compiled for 1.20.4, module version = 0.0.2
 +
[    82.291] ABI class: X.Org Video Driver, version 24.0
 +
[    82.291] (II) FBDEV(2): using default device
 +
[    82.291] (EE) Screen 0 deleted because of no matching config section.
 +
[    82.291] (II) UnloadModule: "modesetting"
 +
[    82.291] (EE) Screen 0 deleted because of no matching config section.
 +
[    82.291] (II) UnloadModule: "fbdev"
 +
[    82.291] (II) UnloadSubModule: "fbdevhw"
 +
[    82.291] (EE)
 +
Fatal server error:
 +
[    82.291] (EE) Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
 +
[    82.291] (EE)
 +
[    82.291] (EE)
 +
Please consult the The X.Org Foundation support
 +
at http://wiki.x.org
 +
for help.
 +
[    82.291] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
 +
[    82.291] (EE)
 +
[    82.294] (EE) Server terminated with error (1). Closing log file.
 +
 
 +
 
 +
 
 +
Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
 +
 
 +
 
 +
解决方法就是卸载xf86-video-fbdev
 +
 
 +
</pre>
 +
https://wiki.debian.org/InstallingDebianOn/Dell/Dell%20XPS%2013%207390
 +
 
 +
https://wiki.gentoo.org/wiki/Dell_XPS_13_2-in-1_(7390)
 +
 
 +
https://wiki.archlinux.org/index.php/Dell_XPS_13_(7390)
  
 
=HiDPI=
 
=HiDPI=
第105行: 第378行:
  
 
xrdb -merge ~/.Xresources
 
xrdb -merge ~/.Xresources
 +
 +
 +
sudo dpkg-reconfigure  console-setup
 
</pre>
 
</pre>
  
第115行: 第391行:
  
 
=install=
 
=install=
 +
安装前准备
 +
在安装linux前,有些BIOS选项需要修改下设置,开机按F2进入BIOS,
 +
 +
    Disable Secure Boot. BIOS > Secure Boot > Disabled
 +
    Change RAID to ACHI. BIOS > System Configuration > SATA Operation > RAID to ACHI
 +
    第一项设置禁止安全启动,让Linux可以启动。第二项改硬盘模式为ACHI,让Linux能够检测到NVME SSD,据说修改后Win10会因为驱动出现问题, 要用win10 先忙改bioss 回  raid就行了 。
 +
 
=bios=
 
=bios=
 +
 +
F12 U盘启动
 +
<pre>
 +
 +
evan@myxps:~/lx/intra$ sudo  dmidecode | grep "BIOS Revision"
 +
BIOS Revision: 1.5
 +
 +
</pre>
 
[[bbs.zol.com.cn/nbbbs/d21_55322_0.html|关于xps13(2015)bios的几个简单设置(转)]]
 
[[bbs.zol.com.cn/nbbbs/d21_55322_0.html|关于xps13(2015)bios的几个简单设置(转)]]
 +
=键盘灯=
  
 +
戴尔xps 13超极本键盘灯  f10
  
 
=other=
 
=other=
第127行: 第420行:
  
 
=see also=
 
=see also=
 +
 +
 +
[https://wiki.freebsd.org/Laptops/Dell_XPS13_9300 Dell XPS 13 9300 (2020 Model)]
 +
 +
https://wiki.debian.org/InstallingDebianOn/Dell/Dell%20XPS%2013%207390
 +
 +
 +
[https://zjhdota.github.io/2017/03/13/xps-install-kali-linux/ xps13 安装Kali Linux]
 
==HIDPI==
 
==HIDPI==
  
第147行: 第448行:
 
https://github.com/shorlander/firefox-linux-hidpi-assets
 
https://github.com/shorlander/firefox-linux-hidpi-assets
  
==other==
+
==j linux other==
 
https://wiki.archlinux.org/index.php/Dell_XPS_13_(7390)
 
https://wiki.archlinux.org/index.php/Dell_XPS_13_(7390)
  
 
[https://www.dell.com/community/XPS/Dell-XPS-13-9370-Dual-boot-Windows-10-amp-Linux/td-p/6241577 Dell XPS 13 9370 - Dual boot Windows 10 & Linux ]
 
[https://www.dell.com/community/XPS/Dell-XPS-13-9370-Dual-boot-Windows-10-amp-Linux/td-p/6241577 Dell XPS 13 9370 - Dual boot Windows 10 & Linux ]
 +
 +
[https://www.dell.com/support/article/zh-cn/sln151792/%E5%A6%82%E4%BD%95%E5%9C%A8-dell-pc-%E4%B8%8A%E5%AE%89%E8%A3%85-ubuntu-%E5%92%8C-windows-vista-%E6%88%967%E4%BD%9C%E4%B8%BA%E5%8F%8C%E5%BC%95%E5%AF%BC?lang=zh  如何在 Dell PC 上安装 Ubuntu 和 Windows Vista 或7作为双引导]
 +
 +
[https://www.v2ex.com/t/218269 xps13 完美支持 ubuntu]
  
 
https://wiki.debian.org/InstallingDebianOn/Dell/Dell_XPS_13_9380
 
https://wiki.debian.org/InstallingDebianOn/Dell/Dell_XPS_13_9380
第161行: 第466行:
  
 
https://linux.dell.com/
 
https://linux.dell.com/
 +
 +
https://www.jianshu.com/p/a0a82a9ebd81
 +
 +
 +
https://tieba.baidu.com/p/6248907302?red_tag=3252142909
  
 
==buy==
 
==buy==
 +
[https://www.bilibili.com/read/cv2386227/ 戴尔XPS13 9380,散热超乎想象]
 +
[https://www.chiphell.com/thread-2192202-1-1.html Dell XPS 13 9300 Developer Edition 开箱]
 +
 +
[https://www.chiphell.com/forum.php?mod=viewthread&tid=2201863&mobile=no [笔电平板<nowiki>]</nowiki> Dell XPS13 2019款7390(白)开箱]
  
 
https://www.linux-on-laptops.com/dell.html
 
https://www.linux-on-laptops.com/dell.html
第169行: 第483行:
  
 
[https://linux.cn/article-9360-1.html 最佳 Linux 笔记本电脑]
 
[https://linux.cn/article-9360-1.html 最佳 Linux 笔记本电脑]
 +
 +
[https://post.smzdm.com/p/a078rnzw/  2019 Dell XPS13 7390迟到的开箱 ]
 +
 +
[https://post.smzdm.com/p/apzkn969/  ​戴尔XPS13 7390笔电测评:10代酷睿CPU加持,屏幕/散热/续航升级 ]

2022年3月8日 (二) 07:20的最新版本

散热

特别是夏天 真的得注意 戴尔祖传的散热方式,不到一定温度风扇都不会转的,你要是嫌热可以去bios改风扇的转速的

八代u的xps13 9360怎么解决散热问题?

炎炎夏日,对XPS13老爷机进行散热改造

闪屏

https://www.dell.com/community/Linux-General/XPS-13-7390-Ubuntu-Screen-flickering/m-p/7493592#M17301

on debian 可行的 

Source:  https://ubuntuforums.org/showthread.php?t=2339302

Steps:

1. sudo (editor command) /etc/default/grub

2. Comment out this line:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

3. Add this line instead:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.enable_psr=0"

4. Save and close your editor

5. sudo update-grub
  今天也是会闪呢  22号    ,kali gnome3  闪屏 2020年 07月 22日 星期三 16:47:39 CST
  过了阵就闪屏 也就是像自动刷新  今天用了win也会  Thu Jul 16 10:51:31 CST 2020
  今天改了  win 好像是好了呢 2020年 07月 21日 星期二 17:34:22 CST
   kali 还是会闪 肿么办 
2020年 07月 18日 星期六 22:02:04 CST 在吃饭时用 也是会的 过了阵就闪屏 也就是像自动刷新
awesome debian 的会变 一下子黑暗呢  一下子亮
  sudo apt-get purge xserver-xorg-video-intel  还是会闪 on debian testing

长期使用

如果U 18能用 , 2020 现在的用法是最大分区 在 /home/evan/data 那就 原来的用户删除 然后 新的大分部 挂到 /home/evan 再创建新用户 用root登录 应该就可以了

外置显示器

还是32的吧 

27 最好是type c 之类的 可以直接连接


  DA300扩展坞 注解:移动适配器同时仅支持一台显示设备 使用说明见下面


DA300 USB-C移动适配器不支持4K(60Hz时) 摘要: 通过HDMI或DisplayPort连接至受支持的系统和监视器时,Dell DA300 USB-C移动适配器只能以60Hz输出4K分辨率。


https://www.dell.com/support/home/zh-cn/product-support/product/dell-usbc-mobile-adapter-da300/docs


Type-C口的实用配件—Dell 戴尔 DA300扩展坞

2021-27寸2K/IPS显示器推荐/选购指南(7月更新)

支持同时多个显示器

戴尔WD19TB——实用可靠的多平台扩展坞

2020

linux-hardware#460bfac7a1 of Dell XPS 13 7390

https://wiki.debian.org/InstallingDebianOn/Dell/Dell%20XPS%2013%207390

触摸板

今天突然用了一下 还真的不错,有如胖哥用mac,以前的本本太差 一直用外接键盘,真的吃亏了 浪费时间

1、单指单击

1、单指单击、双击触摸板,相当于鼠标左键的功能

双指操作

  1. 相当于鼠标右键,弹出选择菜单
  2. 双指同时向上/下划,实现屏幕的滚动,相当于鼠标的滚轮一样
  3. 双指同时向左 / 右划滑,用于浏览图片时,向左或者向右划图片的功能
  4. 双指同时向对角划开 / 缩合 ,实现放大或者缩小当前的图片 / 页面

三指操作

  1. 三指单击触摸板,弹出小娜搜索框
  2. 三指同时向上划,三指同时上划,弹出多任务界面,相当于快捷:win+Tab
  3. 三指同时向下划,当前所有窗口最小化,显示桌面
  4. 三指同时向左/右划,实现快速切换任务程序,相当于快捷键:Ait+tab

see also

win10触控板多指触控、手势操作教程听语 xps13 触摸板如何设置

屏亮度 和电源管理


或者直接拿出 电源管理器到 托盘就行了 右键就有了 

cat  /sys/class/backlight/intel_backlight/brightness
12000

ubntu 18.04 is 7200

直接打开 redshift

 xgamma -gamma .7

  sudo apt install tlp tlp-rdw  tp-smapi-dkms acpi-call-dkms linux-cpupower

终端输入代码:
    
sudo gedit /etc/default/grub

在打开文件中找到

GRUB_CMDLINE_LINUX=""

改成
GRUB_CMDLINE_LINUX="acpi_backlight=vendor"


改好后保存即可

然后升级grub:
    
sudo update-grub

重启之。。。按FN就能调节了

https://www.jianshu.com/p/31d918c3272e

os

freebsd

https://wiki.freebsd.org/Laptops/Dell_XPS13_9360

ubuntu18.04

这个 暂时可以用

Ubuntu 20.04 LTS 升级踩坑分享

How to Upgrade to Ubuntu 20.04 from Ubuntu 18.04 and 19.10

kali

试一下这个kernel

4.15.0-1042-oem

win一开始也会 我改为平衡好像好了 再用一天看看 20200324 会闪屏 电源管理那边模式设置为平衡就好了,不能设置为节能 ,试一下 ?



戴尔XPS 13 Ubuntu 16.04 Chrome浏览器闪屏问题解决办法

系统:Ubuntu 16.04 显卡:Intel® Kabylake GT3

问题:Chrome浏览器看视频时屏幕闪动

解决办法: 20200324 我昨晚用了

sudo apt-get purge xserver-xorg-video-intel


参考:https://askubuntu.com/questions/752743/ubuntu-16-04-skylake-6th-generation-screen-flickering


https://certification.ubuntu.com/hardware/201906-27119

parrot

2020年 03月 27日 mate 桌面测试 闪屏问题 已知 awesome会闪

今天手贱再次升级的win10,又出了新情况。电脑只要空闲后屏幕关闭,恢复后就会闪。只有重起才能恢复。刷BIOS A03?我也试试 补充搞定了不闪了,电源管理那边模式设置为平衡就好了,不能设置为节能,看来一切都是软件的问题

也会闪屏和 试用中 mate 还是会呢 关掉特效果好像不会了 大不了回去再安装个最新的 这个分区再格


这个是自动休眠导致的 如果是mate 在右下角 好像是公司网络问题 回家看会不会 wifi有时会断开 再重连接又可以了

https://www.cnblogs.com/fengxm/p/5981663.html

https://blog.csdn.net/ruangong1203/article/details/72935137


全新安装 一开始wifi不行 后来更新了又好了 但是时常常断 为什么

有多个模式


默认中文编码有问题 #新安装就行了 ,删除整天个/home

debian10

debian10 dvd or xfce 安装了 进入不了GUI 看一下 debian wiki是正常的,要安装别的kernel

https://wiki.debian.org/InstallingDebianOn/Dell/Dell%20XPS%2013%207390

This page describes Debian on the Dell XPS 13 9380 released in January 2019

# dmidecode | grep "Product Name"
        Product Name: XPS 13 9380
        Product Name: 0KTW76

BIOS Update

# dmidecode | grep "BIOS Revision"
        BIOS Revision: 1.1


deb https://mirrors.aliyun.com/debian/ buster-backports main contrib non-free
deb-src https://mirrors.aliyun.com/debian/ buster-backports main contrib non-free

apt install linux-image-amd64/buster-backports wireless-regdb/buster-backports

sudo apt-get install fwupd


参考  
https://www.debian.cn/archives/45





#Power Management

apt install firmware-misc-nonfree 


0. 确保Debian能够联网

1. apt install x-window-system-core gnome-core  #安装最基本的gnome图形相关软件
systemctl set-default graphical.target //设置成图形模式

2. init 6 #设置系统为图形界面启动,该命令执行后系统会重启

3. 设置系统可以root登录

     1) 修改/etc/gdm3/daemon.conf文件,在[security]下增加一行AllowRoot = true

     2)修改/etc/pam.d/gdm-password文件,注释掉auth required pam_succeed_if.so user != root quiet_success

     3)重启系统后,即可使用root登录。


如果多个显示管理器被配置为分别管理不同的 X 服务器,那么它们可以同时运行。要做到这一点,您要按照需求分别对各显示管理器  │  
 │ 进行设置,编辑它们在 /etc/init.d 目录下的 init 脚本,并且关闭对默认显示管理器的检查。                                  │  
 │                                                                                                                        │  
 │ 默认显示管理器:  
 
 
 
    82.286] (==) ModulePath set to "/usr/lib/xorg/modules"
[    82.286] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    82.286] (II) Loader magic: 0x56144eb4fe20
[    82.286] (II) Module ABI versions:
[    82.286] 	X.Org ANSI C Emulation: 0.4
[    82.286] 	X.Org Video Driver: 24.0
[    82.286] 	X.Org XInput driver : 24.1
[    82.286] 	X.Org Server Extension : 10.0
[    82.287] (++) using VT number 2

[    82.288] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[    82.290] (--) PCI:*(0@0:2:0) 8086:9bca:1028:0962 rev 4, Mem @ 0x604a000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[    82.290] (II) LoadModule: "glx"
[    82.290] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    82.291] (II) Module glx: vendor="X.Org Foundation"
[    82.291] 	compiled for 1.20.4, module version = 1.0.0
[    82.291] 	ABI class: X.Org Server Extension, version 10.0
[    82.291] (==) Matched modesetting as autoconfigured driver 0
[    82.291] (==) Matched fbdev as autoconfigured driver 1
[    82.291] (==) Matched vesa as autoconfigured driver 2
[    82.291] (==) Assigned the driver to the xf86ConfigLayout
[    82.291] (II) LoadModule: "modesetting"
[    82.291] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    82.291] (II) Module modesetting: vendor="X.Org Foundation"
[    82.291] 	compiled for 1.20.4, module version = 1.20.4
[    82.291] 	Module class: X.Org Video Driver
[    82.291] 	ABI class: X.Org Video Driver, version 24.0
[    82.291] (II) LoadModule: "fbdev"
[    82.291] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    82.291] (II) Module fbdev: vendor="X.Org Foundation"
[    82.291] 	compiled for 1.20.0, module version = 0.5.0
[    82.291] 	Module class: X.Org Video Driver
[    82.291] 	ABI class: X.Org Video Driver, version 24.0
[    82.291] (II) LoadModule: "vesa"
[    82.291] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    82.291] (II) Module vesa: vendor="X.Org Foundation"
[    82.291] 	compiled for 1.20.1, module version = 2.4.0
[    82.291] 	Module class: X.Org Video Driver
[    82.291] 	ABI class: X.Org Video Driver, version 24.0
[    82.291] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    82.291] (II) FBDEV: driver for framebuffer: fbdev
[    82.291] (II) VESA: driver for VESA chipsets: vesa
[    82.291] (EE) open /dev/dri/card0: No such file or directory
[    82.291] (WW) Falling back to old probe method for modesetting
[    82.291] (EE) open /dev/dri/card0: No such file or directory
[    82.291] (II) Loading sub module "fbdevhw"
[    82.291] (II) LoadModule: "fbdevhw"
[    82.291] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    82.291] (II) Module fbdevhw: vendor="X.Org Foundation"
[    82.291] 	compiled for 1.20.4, module version = 0.0.2
[    82.291] 	ABI class: X.Org Video Driver, version 24.0
[    82.291] (EE) Unable to find a valid framebuffer device
[    82.291] (WW) Falling back to old probe method for fbdev
[    82.291] (II) Loading sub module "fbdevhw"
[    82.291] (II) LoadModule: "fbdevhw"
[    82.291] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    82.291] (II) Module fbdevhw: vendor="X.Org Foundation"
[    82.291] 	compiled for 1.20.4, module version = 0.0.2
[    82.291] 	ABI class: X.Org Video Driver, version 24.0
[    82.291] (II) FBDEV(2): using default device
[    82.291] (EE) Screen 0 deleted because of no matching config section.
[    82.291] (II) UnloadModule: "modesetting"
[    82.291] (EE) Screen 0 deleted because of no matching config section.
[    82.291] (II) UnloadModule: "fbdev"
[    82.291] (II) UnloadSubModule: "fbdevhw"
[    82.291] (EE) 
Fatal server error:
[    82.291] (EE) Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
[    82.291] (EE) 
[    82.291] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    82.291] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    82.291] (EE) 
[    82.294] (EE) Server terminated with error (1). Closing log file.



 Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices


解决方法就是卸载xf86-video-fbdev

https://wiki.debian.org/InstallingDebianOn/Dell/Dell%20XPS%2013%207390

https://wiki.gentoo.org/wiki/Dell_XPS_13_2-in-1_(7390)

https://wiki.archlinux.org/index.php/Dell_XPS_13_(7390)

HiDPI

手上用的就是 1080p 的 XPS15。 是这样的,用 1080p 需要非整数倍缩放(或者直接不缩放看小字体,如果你视力够好的话),用 4K 就是整数倍缩放(据一朋友所说 2x 刚刚好)。大多数的 DE 非整数倍缩放都有 bug,在 UI 不知道哪里就会出来一条突兀的缝,或者哪里的布局就乱了。 至于 Windows …… Windows 的 HiDPI ?有这东西吗?


1080P 如何算 xps13 is 192 Re: best DPI setting for XPS 13 9370 with 4k display?

sqrt(3840**2 + 2160**2) / 13.3 = 331 PPI


config

xps13 7390 kali2020

xrandr --dpi 180



Xft.dpi: 160.0

xrdb -merge ~/.Xresources


sudo dpkg-reconfigure  console-setup

https://wiki.archlinux.org/index.php/x_resources

firefox

Enabling the high DPI mode in Firefox is actually pretty simple, it is just a matter of setting the layout.css.devPixelsPerPx value in about:config to a value of 2 (i.e. double the size).

about:config  --> layout.css.devPixelsPerPx   我试了一下  1.5刚刚好 反正 2太大  小一点点就行了

install

安装前准备 在安装linux前,有些BIOS选项需要修改下设置,开机按F2进入BIOS,

   Disable Secure Boot. BIOS > Secure Boot > Disabled
   Change RAID to ACHI. BIOS > System Configuration > SATA Operation > RAID to ACHI
   第一项设置禁止安全启动,让Linux可以启动。第二项改硬盘模式为ACHI,让Linux能够检测到NVME SSD,据说修改后Win10会因为驱动出现问题, 要用win10 先忙改bioss 回  raid就行了 。

bios

F12 U盘启动


evan@myxps:~/lx/intra$ sudo  dmidecode | grep "BIOS Revision"
	BIOS Revision: 1.5

关于xps13(2015)bios的几个简单设置(转)

键盘灯

戴尔xps 13超极本键盘灯 f10

other

如何激活戴尔XPS13的Office365? 

1、首先,在电脑上随意打开一个office软件,然后选择右上角的文件。

https://zhidao.baidu.com/question/434027245863942644.html

see also

Dell XPS 13 9300 (2020 Model)

https://wiki.debian.org/InstallingDebianOn/Dell/Dell%20XPS%2013%207390


xps13 安装Kali Linux

HIDPI

arch HiDPI

HiDPI (High Dots Per Inch) Display

有谁能说说 4K 屏幕的 xps 15 使用感受

https://winaero.com/blog/find-change-screen-dpi-linux/

best DPI setting for XPS 13 9370 with 4k display

有关retina和HiDPI那点事

设置Linux桌面环境,实现HiDPI显示支持

https://github.com/thapabishwa/HiDPI

https://github.com/shorlander/firefox-linux-hidpi-assets

j linux other

https://wiki.archlinux.org/index.php/Dell_XPS_13_(7390)

Dell XPS 13 9370 - Dual boot Windows 10 & Linux

如何在 Dell PC 上安装 Ubuntu 和 Windows Vista 或7作为双引导

xps13 完美支持 ubuntu

https://wiki.debian.org/InstallingDebianOn/Dell/Dell_XPS_13_9380

https://wiki.debian.org/InstallingDebianOn/Dell/Dell_XPS_13_9360

外观性能双料王:XPS 13 9370评测

戴尔XPS13 7390笔电测评:10代酷睿CPU加持,屏幕/散热/续航升级

https://linux.dell.com/

https://www.jianshu.com/p/a0a82a9ebd81


https://tieba.baidu.com/p/6248907302?red_tag=3252142909

buy

戴尔XPS13 9380,散热超乎想象 Dell XPS 13 9300 Developer Edition 开箱

[笔电平板] Dell XPS13 2019款7390(白)开箱

https://www.linux-on-laptops.com/dell.html

怎样选购用于Linux的笔记本电脑

最佳 Linux 笔记本电脑

2019 Dell XPS13 7390迟到的开箱

​戴尔XPS13 7390笔电测评:10代酷睿CPU加持,屏幕/散热/续航升级