Redis5 cluster
目录
优化
remove RDB固化
#dbfilename dump_7000.rdb
pre 常用脚本
cat /data/evan/redisloop.sh #!/bin/bash #usage redisloop.sh rr cat $1 | while read line do redis-cli -c -h 172.31.22.218 -p 7000 -a hell $line redis-cli -c -h 172.31.22.218 -p 7001 -a hell $line redis-cli -c -h 172.31.16.135 -p 7002 -a hell $line redis-cli -c -h 172.31.16.135 -p 7003 -a hell $line redis-cli -c -h 172.31.23.43 -p 7004 -a hell $line redis-cli -c -h 172.31.23.43 -p 7005 -a hell $line done vi rr del hello_coin_limit_045617153_2 del hello_coin_limit_9811460_2 cat redisin.sh #!/bin/bash redis-cli -c -h 172.31.22.218 -p 7000 -a hello `cat $1` redis-cli -c -h 172.31.22.218 -p 7001 -a hello `cat $1` # redis-cli -c -h 172.31.16.135 -p 7002 -a hello `cat $1` #$1 # del hello_coin_list redis-cli -c -h 172.31.16.135 -p 7003 -a hello `cat $1` #$1 #del hello_coin_list # redis-cli -c -h 172.31.23.43 -p 7004 -a hello `cat $1`#$1 #del hello_coin_list redis-cli -c -h 172.31.23.43 -p 7005 -a hello `cat $1` #$1 #del hello_coin_list
docker-compose
升级 or 降级 redis 版本
升级 or 降级 redis 版本 直接换 docker-compose.yml 里面的版本就行了
host 网络 要手工添加集群
同样要用firewall etc 要优化的地方 restart 已添加
升级 or 降级 redis 版本 直接换 docker-compose.yml 里面的版本就行了
按照 Redis 官网：https://redis.io/topics/cluster-tutorial 的提示，为了使 Docker 与 Redis Cluster 兼容，您需要使用 Docker 的 host 网络模式。
Redis Cluster and Docker
Currently Redis Cluster does not support NATted environments and in general environments where IP addresses or TCP ports are remapped.
Docker uses a technique called port mapping: programs running inside Docker containers may be exposed with a different port compared to the one the program believes to be using. This is useful in order to run multiple containers using the same ports, at the same time, in the same server.
In order to make Docker compatible with Redis Cluster you need to use the host networking mode of Docker. Please check the --net=host option in the Docker documentation for more information.
相关脚本和配置 https://github.com/evan886/redis/tree/master/redis-cluster-docker_host
操作开始
Usage:
NOTE2020
git clone https://github.com/evan886/redis.git
cd /data/apps && mv redis/redis-cluster-docker_host/ redis-cluster-docker && rm -rf redis
#运行
docker-compose up -d
#要改的地方
bind 172.18.178.218 127.0.0.1
批量替换 sed
sed -i 's!old!new!' filename
sed -i 's!5.0.2-alpine!5.0.9-alpine!' docker-compose.yml
sed -i 's!192.168.11.236!172.31.16.4!' *.conf
aliyu 不能 绑定外网NAT IP bind 内网IP 然后 创建集群用 外网IP就可以了
不然后
(error) CLUSTERDOWN Hash slot not served cluster没起来
#docker exec -it node-7000 redis-cli -p 7000 --cluster create 10.25.196.78:7000 10.25.196.78:7001 10.25.196.78:7002 10.25.196.78:7003 10.25.196.78:7004 10.25.196.78:7005 --cluster-replicas 1
IP='192.168.10.193'
docker exec -it node-7000 redis-cli -p 7000 --cluster create $IP:7000 $IP:7001 $IP:7002 $IP:7003 $IP:7004 $IP:7005 --cluster-replicas 1
#如果是三台机器 6个节点
#mark
IP='172.31.127.221'
IP2='172.31.127.222'
IP3='172.31.127.223'
docker exec -it node-7000 redis-cli -p 7000 --cluster create ${IP}:7000 ${IP}:7001 ${IP2}:7002 ${IP2}:7003 ${IP3}:7004 ${IP3}:7005 --cluster-replicas 1
# #要改的地方 不要交互
echo 'masterauth passwd123d
requirepass passwd123d' >>redis-7000.conf
check
docker exec -it node-7000 redis-cli -p 7000 -c -h 483.284.7.34 -a passwd12Trttt3d
bind 要记得改为你要的IP 如果用0.0.0.0 那就不要127.0.0.1
有问题多看log 目录
#这里是母机的ip 如果是三台机器 那么就有 三个 IP
docker exec -it node-7000 redis-cli -p 7000 --cluster create ip:7000 ip:7001 ip:7002 ip:7003 ip:7004 ip:7005 --cluster-replicas 1
docker exec -it node-7000 redis-cli -p 7000 --cluster create --cluster-replicas 1 ip:7000 ip:7001 ip:7002 ip:7003 ip:7004 ip:7005
三台母机的情形 就是每个docker-compose.yml 只启动两个 ，其它的删除就行了 201912
数据损坏重做 2020
内网的193机器 PHP老是搞坏，或者强行restart os 常常会有几个节点起不来 这时 只能重新做 cluster data 目录下的mv 走或删除掉 conf 目录下的 先去掉密码 up -d 起所有节点 conf 用追加再添加回密码 docker-compose restart 起回所有的节点
laradock方法
相关文件
#注意 网络是这个， 还有就是多台机器之间 也不太可能能这个网络 那样 容器之间的redis 是不通的
NETWORKS_DRIVER=bridge
less docker-compose.yml
### Redis Cluster evan##########################################
redis-cluster:
build: ./redis-cluster
ports:
- "${REDIS_CLUSTER_PORT_RANGE}:7000-7005"
networks:
- backend
cat redis-cluster/Dockerfile #注意 redis版本
FROM grokzen/redis-cluster:5.0.6
#FROM grokzen/redis-cluster:latest
LABEL maintainer="hareku <[email protected]>"
添加密码
添加密码 可以进入容器里面直接添加 ，不过不够好 ，有空要 放到母机出来，有如我上面 004 7005 redis-cluster.tmpl redis.tmpl sentinel.tmpl root@401a49002b88:/data# ls /redis-conf/700 7000/ 7001/ 7002/ 7003/ 7004/ 7005/ root@401a49002b88:/data# ls /redis-conf/7000/redis.conf /redis-conf/7000/redis.conf root@401a49002b88:/data# tail /redis-conf/7000/redis.conf bind 0.0.0.0 port 7000 cluster-enabled yes cluster-config-file nodes.conf cluster-node-timeout 5000 appendonly yes dir /redis-data/7000 进入redis-cluster 容器 直接非交互 这里以7005 端口为例子 redis-cli -c -h 127.0.0.1 -p 7005 config set masterauth 36DbRGvv66 redis-cli -c -h 127.0.0.1 -p 7005 config set requirepass 36DbRGvv66 redis-cli -c -h 127.0.0.1 -p 7005 auth 36DbRGvv66 redis-cli -c -h 127.0.0.1 -p 7005 -a 36DbRGvv66 config rewrite redis-cli -c -h 127.0.0.1 -p 7005 config rewrite # 最后这一步 有时得 加上密码 Usage: 可以直接用物理机的ip 内网或者外网 上次搞了几天 ，是忙晕了 不记得打开防火墙 7000-7005的端口
源码手工
单独安装redis-cli
国内镜像 https://mirrors.huaweicloud.com/redis/ debian 上可以单独安装 redis-cli 但是rhel居然不行 只能编译一下 make -j 2 之后 ，copy 走这个 bin 文件就行了 is centos make MALLOC=libc zmalloc.h:50:31: fatal error: jemalloc/jemalloc.h: No such file or directory ./src/redis-cli -c 这个二进制包放 /usr/bin/ #或者放 /usr/sbin 只有超级用户可以用到 如果其它用户要用 就不要放这里了 redis cluster 执行脚本 不用老是一个一个的搞 麻烦 其实只要在三个主上执行就行了 你6个全执行也没事，反正是脚本的 #!/bin/bash ##Usage bash redisin.sh 你的redis脚本 redis-cli -c -h 172.31.22.218 -p 7000 -a hello `cat $1` redis-cli -c -h 172.31.22.218 -p 7001 -a hello `cat $1` # redis-cli -c -h 172.31.16.135 -p 7002 -a hello `cat $1` #$1 # del hello_list
节点信息
角色 主机名 IP1 IP2 7000 7001 01 192.168.10.211 7002 7003 02 192.168.10.212 7004 7005 03 192.168.10.213
姐妹篇 Redis4 cluster
防火墙设置
第一台： firewall-cmd --permanent --add-port=7000/tcp firewall-cmd --permanent --add-port=17000/tcp firewall-cmd --permanent --add-port=7001/tcp firewall-cmd --permanent --add-port=17001/tcp firewall-cmd --reload firewall-cmd --list-all-zones 第二台： firewall-cmd --permanent --add-port=7002/tcp firewall-cmd --permanent --add-port=17002/tcp firewall-cmd --permanent --add-port=7003/tcp firewall-cmd --permanent --add-port=17003/tcp firewall-cmd --reload firewall-cmd --list-all-zones 第三台： firewall-cmd --permanent --add-port=7004/tcp firewall-cmd --permanent --add-port=17004/tcp firewall-cmd --permanent --add-port=7005/tcp firewall-cmd --permanent --add-port=17005/tcp firewall-cmd --reload firewall-cmd --list-all-zones
系统参数设置
#vi /etc/sysctl.conf echo 'vm.overcommit_memory = 1 net.core.somaxconn = 1024' >>/etc/sysctl.conf /sbin/sysctl -p /etc/sysctl.conf
redis 5 安装
#bash redisins.sh 2>&1 | tee redislog
wget -c http://download.redis.io/releases/redis-5.0.6.tar.gz
#set var
redis_install_dir=/data/apps/redis
redis_ver=5.0.6
THREAD=4
tar xzf redis-${redis_ver}.tar.gz
pushd redis-${redis_ver} > /dev/null
make -j ${THREAD}
make PREFIX=${redis_install_dir}
make distclean
#cd src && make install #这个才行 特别是cluster ? 2019年 8月16日 星期五 23时29分41秒 CST
make install PREFIX=${redis_install_dir}
echo "export PATH=${redis_install_dir}/bin/:$PATH" >> /etc/profile && source /etc/profile
####**********************下面是老的
wget -c http://download.redis.io/releases/redis-5.0.5.tar.gz
redis_install_dir=/home/apps/redis
redis_ver=5.0.5
THREAD=4
tar xzf redis-${redis_ver}.tar.gz
pushd redis-${redis_ver} > /dev/null
make -j ${THREAD}
make PREFIX=/home/apps/redis #here
make distclean
#cd src && make install #这个才行 特别是cluster ? 2019年 8月16日 星期五 23时29分41秒 CST
make install PREFIX=/home/apps/redis # make install #这个有时没有创建出目录来呀
#这个我没做 根本没用 哈哈
#复制rb 或者放到安装的bin目录 然后再加path
#cp /opt/redis-5.0.0/src/redis-trib.rb /usr/local/bin
echo 'export PATH=/home/apps/redis/bin/:$PATH' >> /etc/profile && source /etc/profile
##**********************上面是老的
NOTE
redis5 用redis-cli创建整个redis集群(redis5以前的版本集群是依靠ruby脚本redis-trib.rb实现
创建节点
#第一台：192.168.10.211 #here
redis_install_dir=/data/apps/redis
mkdir -p ${redis_install_dir}
cd ${redis_install_dir}
mkdir -p redis_cluster
cd redis_cluster
mkdir data 7000 7001
#cp /root/src/redis-5.0.5/redis.conf ${redis_install_dir}/redis_cluster
#cd /home/apps/redis/redis_cluster
#cp redis.conf 7000/redis_7000.conf
#mv redis.conf 7001/redis_7001.conf
#第2台：192.168.10.212
redis_install_dir=/data/apps/redis
mkdir -p ${redis_install_dir}
cd ${redis_install_dir}
mkdir -p redis_cluster
cd redis_cluster
mkdir data 7002 7003
#cp /root/src/redis-5.0.5/redis.conf .
#cp redis.conf 7002/redis_7002.conf
#mv redis.conf 7003/redis_7003.conf
#第3台：192.168.10.213
redis_install_dir=/data/apps/redis
mkdir -p ${redis_install_dir}
cd ${redis_install_dir}
mkdir -p redis_cluster
cd redis_cluster
mkdir data 7004 7005
#cp /root/src/redis-5.0.5/redis.conf .
#cp redis.conf 7004/redis_7004.conf
#mv redis.conf 7005/redis_7005.conf
修改配置文件(三台机器6个配置)
note 日志在系统那 因为我们配置文件没指定 /var/log/redis/ ls /home/apps/redis/redis_cluster/data/ appendonly-7000.aof dump_7000.rdb nodes_7000.conf appendonly-7001.aof dump_7001.rdb nodes_7001.conf # 生成在这里了 /home/apps/redis/redis_cluster/data/nodes_7000.conf nodes_7001.conf 配置建议加上这个 下面这些配置还加上的 # appendfsync always appendfsync everysec # appendfsync no 第一台： pushd /home/apps/redis/redis_cluster mkdir -p /var/log/redis : > 7000/redis_7000.conf #vi 7000/redis_7000.conf #非交互进行 echo 'port 7000 bind 192.168.10.211 127.0.0.1 cluster-enabled yes appendfilename "appendonly-7000.aof" cluster-config-file nodes_7000.conf cluster-node-timeout 15000 appendonly yes appendfsync everysec daemonize yes dbfilename dump_7000.rdb dir /data/apps/redis/redis_cluster/data logfile "/var/log/redis/7000.log" protected-mode yes pidfile /var/run/redis_7000.pid'>7000/redis_7000.conf :>7001/redis_7001.conf echo 'port 7001 bind 192.168.10.211 127.0.0.1 cluster-enabled yes appendfilename "appendonly-7001.aof" cluster-config-file nodes_7001.conf cluster-node-timeout 15000 appendonly yes appendfsync everysec daemonize yes dbfilename dump_7001.rdb dir /home/apps/redis/redis_cluster/data logfile "/var/log/redis/7001.log" protected-mode yes pidfile /var/run/redis_7001.pid'>7001/redis_7001.conf 第二台 pushd /home/apps/redis/redis_cluster mkdir -p /var/log/redis :>7002/redis_7002.conf echo 'port 7002 bind 192.168.10.212 127.0.0.1 cluster-enabled yes appendfilename "appendonly-7002.aof" cluster-config-file nodes_7002.conf cluster-node-timeout 15000 appendonly yes appendfsync everysec daemonize yes dbfilename dump_7002.rdb dir /home/apps/redis/redis_cluster/data logfile "/var/log/redis/7002.log" protected-mode yes pidfile /var/run/redis_7002.pid' >7002/redis_7002.conf :>7003/redis_7003.conf echo 'port 7003 bind 192.168.10.212 127.0.0.1 cluster-enabled yes appendfilename "appendonly-7003.aof" cluster-config-file nodes_7003.conf cluster-node-timeout 15000 appendonly yes appendfsync everysec daemonize yes dbfilename dump_7003.rdb dir /home/apps/redis/redis_cluster/data logfile "/var/log/redis/7003.log" protected-mode yes pidfile /var/run/redis_7003.pid'>7003/redis_7003.conf 第3台 pushd /home/apps/redis/redis_cluster mkdir -p /var/log/redis :>7004/redis_7004.conf echo 'port 7004 bind 192.168.10.213 127.0.0.1 cluster-enabled yes appendfilename "appendonly-7004.aof" cluster-config-file nodes_7004.conf cluster-node-timeout 15000 appendonly yes appendfsync everysec daemonize yes dbfilename dump_7004.rdb dir /home/apps/redis/redis_cluster/data logfile "/var/log/redis/7004.log" protected-mode yes pidfile /var/run/redis_7004.pid ' > 7004/redis_7004.conf :>7005/redis_7005.conf echo 'port 7005 bind 192.168.10.213 127.0.0.1 cluster-enabled yes appendfilename "appendonly-7005.aof" cluster-config-file nodes_7005.conf cluster-node-timeout 15000 appendonly yes daemonize yes dbfilename dump_7005.rdb dir /home/apps/redis/redis_cluster/data logfile "/var/log/redis/7005.log" protected-mode yes pidfile /var/run/redis_7005.pid' >7005/redis_7005.conf
启动redis
#cd /usr/local/redis/etc/redis_cluster #on freebsd
第一台： #注意用 "" 不要'' 要替换变量的值
mkdir /var/log/redis
redis_install_dir=/data/apps/redis
echo "redis_install_dir=/data/apps/redis
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7000/redis_7000.conf
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7001/redis_7001.conf">${redis_install_dir}/redis_cluster/run
chmod +x ${redis_install_dir}/redis_cluster/run && bash ${redis_install_dir}/redis_cluster/run
chmod +x /etc/rc.d/rc.local
echo "${redis_install_dir}/redis_cluster/run" > >/etc/rc.d/rc.local #把变量替换为值,不建议用''
第二台
mkdir /var/log/redis
redis_install_dir=/data/apps/redis
echo "${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7002/redis_7002.conf
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7003/redis_7003.conf">${redis_install_dir}/redis_cluster/run
chmod +x ${redis_install_dir}/redis_cluster/run && bash ${redis_install_dir}/redis_cluster/run
chmod +x /etc/rc.d/rc.local
echo "${redis_install_dir}/redis_cluster/run" > >/etc/rc.d/rc.local #把变量替换为值
第三台：
mkdir /var/log/redis
redis_install_dir=/data/apps/redis
echo "${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7004/redis_7004.conf
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7005/redis_7005.conf">${redis_install_dir}/redis_cluster/run
chmod +x ${redis_install_dir}/redis_cluster/run && bash ${redis_install_dir}/redis_cluster/run
chmod +x /etc/rc.d/rc.local
echo "${redis_install_dir}/redis_cluster/run" >>/etc/rc.d/rc.local #把变量替换为值
登陆redis
/home/apps/redis/bin/redis-cli -c -h 192.168.10.211 -p 7000 redis-cli -h 10.3.10.141 -p 7001 redis-cli -h 10.3.10.142 -p 7002 redis-cli -h 10.3.10.142 -p 7003 redis-cli -h 10.3.10.143 -p 7004 redis-cli -h 10.3.10.143 -p 7005
创建集群
注意：在任意一台上运行 不要在每台机器上都运行，一台就够了 #要开通端口 firewalld #在geany 有: 格式可能有点不对 要注意 redis-cli --cluster create --cluster-replicas 1 192.168.10.211:7000 192.168.10.211:7001 192.168.10.212:7002 192.168.10.212:7003 192.168.10.213:7004 192.168.10.213:7005 #--replicas 1 表示 自动为每一个master节点分配一个slave节点 上面有6个节点，程序会按照一定规则生成 3个master（主）3个slave(从)
执行详情
[root@dev-hello-1 redis_cluster]# redis-cli --cluster create --cluster-replicas 1 192.168.10.201:7000 192.168.10.201:7001 192.168.10.202:7002 192.168.10.202:7003 192.168.10.203:7004 192.168.10.203:7005 >>> Performing hash slots allocation on 6 nodes... Master[0] -> Slots 0 - 5460 Master[1] -> Slots 5461 - 10922 Master[2] -> Slots 10923 - 16383 Adding replica 192.168.10.202:7003 to 192.168.10.201:7000 Adding replica 192.168.10.203:7005 to 192.168.10.202:7002 Adding replica 192.168.10.201:7001 to 192.168.10.203:7004 M: caf3a2c83f4f34498d9152161d3d62ca499094eb 192.168.10.201:7000 slots:[0-5460] (5461 slots) master S: ecbc0c648ff15c4ff2c176563afa580c7c8b7f3b 192.168.10.201:7001 replicates 3792aae886d957e1a0272bcd198a06798f05c26d M: 9c2f0b7827180d93371b493e8ca59b6eea776b0c 192.168.10.202:7002 slots:[5461-10922] (5462 slots) master S: b66f09b38e321ce3f8ee000b7cb40fe804f3a450 192.168.10.202:7003 replicates caf3a2c83f4f34498d9152161d3d62ca499094eb M: 3792aae886d957e1a0272bcd198a06798f05c26d 192.168.10.203:7004 slots:[10923-16383] (5461 slots) master S: a027592b56eb7477fe039786490318efdda8a0d6 192.168.10.203:7005 replicates 9c2f0b7827180d93371b493e8ca59b6eea776b0c Can I set the above configuration? (type 'yes' to accept): yes >>> Nodes configuration updated >>> Assign a different config epoch to each node >>> Sending CLUSTER MEET messages to join the cluster Waiting for the cluster to join .... >>> Performing Cluster Check (using node 192.168.10.201:7000) M: caf3a2c83f4f34498d9152161d3d62ca499094eb 192.168.10.201:7000 slots:[0-5460] (5461 slots) master 1 additional replica(s) S: a027592b56eb7477fe039786490318efdda8a0d6 192.168.10.203:7005 slots: (0 slots) slave replicates 9c2f0b7827180d93371b493e8ca59b6eea776b0c M: 3792aae886d957e1a0272bcd198a06798f05c26d 192.168.10.203:7004 slots:[10923-16383] (5461 slots) master 1 additional replica(s) M: 9c2f0b7827180d93371b493e8ca59b6eea776b0c 192.168.10.202:7002 slots:[5461-10922] (5462 slots) master 1 additional replica(s) S: ecbc0c648ff15c4ff2c176563afa580c7c8b7f3b 192.168.10.201:7001 slots: (0 slots) slave replicates 3792aae886d957e1a0272bcd198a06798f05c26d S: b66f09b38e321ce3f8ee000b7cb40fe804f3a450 192.168.10.202:7003 slots: (0 slots) slave replicates caf3a2c83f4f34498d9152161d3d62ca499094eb [OK] All nodes agree about slots configuration. >>> Check for open slots... >>> Check slots coverage... [OK] All 16384 slots covered.
查看redis集群情况
redis-cli -h 192.168.10.211 -p 7000 cluster nodes a027592b56eb7477fe039786490318efdda8a0d6 192.168.10.203:7005@17005 slave 9c2f0b7827180d93371b493e8ca59b6eea776b0c 0 1567502665000 6 connected 3792aae886d957e1a0272bcd198a06798f05c26d 192.168.10.203:7004@17004 master - 0 1567502666171 5 connected 10923-16383 9c2f0b7827180d93371b493e8ca59b6eea776b0c 192.168.10.202:7002@17002 master - 0 1567502664166 3 connected 5461-10922 ecbc0c648ff15c4ff2c176563afa580c7c8b7f3b 192.168.10.201:7001@17001 slave 3792aae886d957e1a0272bcd198a06798f05c26d 0 1567502664000 5 connected caf3a2c83f4f34498d9152161d3d62ca499094eb 192.168.10.201:7000@17000 myself,master - 0 1567502663000 1 connected 0-5460 b66f09b38e321ce3f8ee000b7cb40fe804f3a450 192.168.10.202:7003@17003 slave caf3a2c83f4f34498d9152161d3d62ca499094eb 0 1567502665169 4 connected
cluster 完整性检查
redis-trib.rb check 10.3.10.140:7000 redis-trib.rb check 10.3.10.140:7001 redis-trib.rb check 10.3.10.140:7002 redis-trib.rb check 10.3.10.140:7003 redis-trib.rb check 10.3.10.140:7004 redis-trib.rb check 10.3.10.140:7005 结果如下 16384个槽都分配到了 节点 [OK] All nodes agree about slots configuration. >>> Check for open slots... >>> Check slots coverage... [OK] All 16384 slots covered.
测试
redis-cli -c -h 192.168.10.201 -p 7000 [root@dev-hello-1 redis_cluster]# redis-cli -c -h 192.168.10.201 -p 7000 192.168.10.201:7000> set evan 36 -> Redirected to slot [14924] located at 192.168.10.203:7004 OK 192.168.10.203:7004> [root@dev-hello-2 redis_cluster]# redis-cli -c -h 192.168.10.202 -p 7002 192.168.10.202:7002> get evan -> Redirected to slot [14924] located at 192.168.10.203:7004 "36" 192.168.10.203:7004> dev-hello-3 redis_cluster]# redis-cli -c -h 192.168.10.203 -p 7005 192.168.10.203:7005> get evan -> Redirected to slot [14924] located at 192.168.10.203:7004 "36" 192.168.10.203:7004> 测试通过了 #20191113 要加 -a 密码访问 不然老是提示要密码 [root@prod-02 ~]# redis-cli -c -h 172.16.200.12 -p 7002 172.16.200.12:7002> auth ci1723 OK 172.16.200.12:7002> get evan -> Redirected to slot [14924] located at 172.16.200.7:7004 (error) NOAUTH Authentication required. 172.16.200.7:7004> auth ci1723 OK 172.16.200.7:7004> get evan "56;"
添加redis集群密码
方式一：修改所有Redis集群中的redis.conf文件加入
#不要交互 for file in `ls *.conf` do echo 'masterauth passwd123dHello requirepass passwd123dHello' >>$file done test visa docker exec -it node-7000 redis-cli -p 7000 -c -h 172.31.16.4 -a passwd12Trttt3d echo 'masterauth passwd123d requirepass passwd123d' >>redis-7000.conf # NOTE 还是这个办法好 不然可能有些 没加载到配置文件去呢 masterauth passwd123 requirepass passwd123 说明：这种方式需要重新启动各节点
方式二：进入各个实例进行设置 就是所有节点：不建议
redis-cli -c -h 10.3.10.141 -p 7001 #好像不能一起执行 config set masterauth 36DbRGvv config set requirepass 36DbRGvv auth 36DbRGvv config rewrite 添加redis集群密码 一开始忘记加-c 导致 143 两个都加不上了 redis本身的密码这样就有了 -a 后 再执行命令就再 auth ， 而如果是进入后 auth password 要每次 都再验证一下密码 麻烦
redis client redis-tools or redis-cli
下载 解压源码 sudo make -j 9 sudo cp src/redis-cli /usr/bin/redis-cli
开机自己启动
#非交互
redis_install_dir=/data/apps/redis
echo "${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7004/redis_7004.conf
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7005/redis_7005.conf">${redis_install_dir}/redis_cluster/run
chmod +x ${redis_install_dir}/redis_cluster/run && bash ${redis_install_dir}/redis_cluster/run
chmod +x /etc/rc.d/rc.local
echo "${redis_install_dir}/redis_cluster/run" >>/etc/rc.d/rc.local #把变量替换为值
#交互
vi /apps/redis/redis_cluster/run
/apps/redis/bin/redis-server /home/apps/redis/redis_cluster/7004/redis_7004.conf
/apps/redis/bin/redis-server /home/apps/redis/redis_cluster/7005/redis_7005.conf
chmod +x /apps/redis/redis_cluster/run
chmod +x /etc/rc.d/rc.local
vi /etc/rc.d/rc.local
/apps/redis/redis_cluster/run
开启关闭
redis-cli -a xxx -c -h 192.168.0.60 -p 8001 shutdown #集群cluster_state变成了fail状态? 不过要服务正常的情况下才行
troubleshooting
收到报警 Labels alertname = vm_host_down instance = redis://10.3.10.141:7000 job = redis_cluster severity = page Annotations description = redis://10.3.10.141:7000 of job market_redis_cluster has been down for more than 1 minutes.. summary = Instance redis://10.3.10.141:7000 down 7000 进程在但是 登录不进去 日志如下 03:01:16.166 # Unable to connect to MASTER: No such file or directory 22283:S 16 Jun 03:01:17.167 * Connecting to MASTER ?:7003 22283:S 16 Jun 03:01:17.175 # Unable to connect to MASTER: No such file or directory 22283:S 16 Jun 03:01:18.177 * Connecting to MASTER ?:7003 处理办法 kill -9 7000的 再启动 暂时正常 ISCONF Errors writing to the AOF file: No space left on device; nested exception is redis.clients.jedis.exceptions.JedisDataException: MISCONF Errors writing to the AOF file: No space left on device org.springframework.dao.InvalidDataAccessApiUsageException: MISCONF Errors writing to the AOF file: No space left on device; nested exception is redis.clients.jedis.exceptions.JedisDataException: MISCONF Errors writing to the AOF file: No space left on device 原因 有一个台redis的机器 空间100% tail boot.log [ OK ] Started Network Time Service. [FAILED] Failed to start /etc/rc.d/rc.local Compatibility. See 'systemctl status rc-local.service' for details. #启动rc-local 服务 on aliyun 不要不小心 不清空了 /etc/rc.d/rc.local systemctl enable rc-local.service redis 安装报错 jemalloc/jemalloc.h: No such file or directory 理上次编译残留文件，重新编译 make distclean && make 导致出现这个错误的原因 错误的本质是我们在开始执行make 时遇到了错误（大部分是由于gcc未安装），然后我们安装好了gcc 后，我们再执行make ,这时就出现了jemalloc/jemalloc.h: No such file or directory。这是因为上次的 ERROR: for redis-cluster-8005 Cannot start service redis-cluster-8005: OCI runtime create failed: container_linux.go:346: starting container process caused "process_linux.go:449: container init caused \"rootfs_linux.go:58: mounting \\\"/home/redis-cluster-docker_host/conf/redis-8005.conf\\\" to rootfs \\\"/var/lib/docker/overlay2/f80340e6f1abc4aa43cde08ba4c5aa48787b092cbbbb64f01c5f0ad213d71368/merged\\\" at \\\"/var/lib/docker/overlay2/f80340e6f1abc4aa43cde08ba4c5aa48787b092cbbbb64f01c5f0ad213d71368/merged/usr/local/etc/redis/redis.conf\\\" caused \\\"not a directory\\\"\"": unknown: Are you trying to mount a directory onto a file (or vice-versa)? Check if the specified host path exists and is the expected type ERROR: Encountered errors while bringing up the project. [root@stage-secret-im-rabbitmq03 redis-cluster-docker_host]# docker -V ^C [root@stage-secret-im-rabbitmq03 redis-cluster-docker_host]# docker -v Docker version 19.03.5, build 633a0ea [root@stage-secret-im-rabbitmq03 redis-cluster-docker_host]# docker-compose down Removing node-8004 ... done Removing node-8005 ... done Removing node-8003 ... done Removing node-8001 ... done Removing node-8002 ... done Removing node-8006 ... done 断电后，node文件 nodes-7002.conf 内容中多了一个V 删除后正常
Creating Server TCP listening socket *:6379: bind: No such file or directory
问题描述
Creating Server TCP listening socket *:6379: bind: No such file or directory 解决思路
我这边检查之后发现Redis服务已经启动了
redis-cli 去看是否能连接上，进的去执行 shutdown 就断开连接，重新执行就可以启动 如果可以的话 ps -ef | grep redis 查看服务是否已经启动，kill -9 PID 杀掉服务重新启动
redis 安装报错 jemalloc/jemalloc.h: No such file or directory。
make jemalloc/jemalloc.h: No such file or directory
make时报如下错误： zmalloc.h:50:31: error: jemalloc/jemalloc.h: No such file or directory zmalloc.h:55:2: error: #error "Newer version of jemalloc required" make[1]: *** [adlist.o] Error 1 make[1]: Leaving directory `/data0/src/redis-2.6.2/src' make: *** [all] Error 2 原因是jemalloc重载了Linux下的ANSI C的malloc和free函数。解决办法：make时添加参数。 make MALLOC=libc
断电后 cluster损坏
查看日志 tail log/7000.log 1:M 31 Aug 2020 02:20:53.960 # Bad file format reading the append only file: make a backup of your AOF file, then use ./redis-check-aof --fix <filename> 不知道存放路径的可以查找find / -name redis-check-aof apt install redis-tools -7000.conf nodes-7003.conf temp-169.rdb 因为起不来的是 7004节点容器 所以有针对的 修复 命令如下 root@cailuw-dev:/home/apps/redis_cluster/data# redis-check-aof --fix appendonly-7004.aof The AOF appears to start with an RDB preamble. Checking the RDB preamble to start: [offset 0] Checking RDB file --fix [offset 26] AUX FIELD redis-ver = '5.0.2' [offset 40] AUX FIELD redis-bits = '64' [offset 52] AUX FIELD ctime = '1598476864' [offset 67] AUX FIELD used-mem = '3217224' [offset 83] AUX FIELD aof-preamble = '1' [offset 85] Selecting DB ID 0 [offset 226540] Checksum OK [offset 226540] \o/ RDB looks OK! \o/ [info] 1999 keys read [info] 134 expires [info] 110 already expired RDB preamble is OK, proceeding with AOF tail... 0x 2eaac6d: Expected prefix '*', got: ' AOF analyzed: size=48934026, ok_up_to=48933997, diff=29 This will shrink the AOF from 48934026 bytes, with 29 bytes, to 48933997 bytes Continue? [y/N]: y Successfully truncated AOF
Warning: AUTH failed
7002> get evan -> Redirected to slot [14924] located at 192.168.10.53:7004 Warning: AUTH failed "36" (error) ERR Client sent AUTH, but no password is set cli版本太高了 evan@myxps:~$ redis-cli --version redis-cli 6.0.6
see also
https://redis.io/topics/cluster-tutorial
http://redisdoc.com/topic/cluster-tutorial.html
Docker Compose 搭建 Redis Cluster 集群环境
redis（二）集群 redis-cluster & redis主从同步
