“Redis5 cluster”的版本间的差异

来自linux中国网wiki
跳到导航 跳到搜索
第186行： 第186行：
 
make  -j  2 之后 ，copy 走这个 bin 文件就行了  is centos  make MALLOC=libc  zmalloc.h:50:31: fatal error: jemalloc/jemalloc.h: No such file or directory
 
make  -j  2 之后 ，copy 走这个 bin 文件就行了  is centos  make MALLOC=libc  zmalloc.h:50:31: fatal error: jemalloc/jemalloc.h: No such file or directory
  
−
./src/redis-cli -c /usr/bin/  #或者放 /usr/sbin  只有超级用户可以用到  如果其它用户要用 就不要放这里了  
+
./src/redis-cli -c   这个二进制包放        /usr/bin/  #或者放 /usr/sbin  只有超级用户可以用到  如果其它用户要用 就不要放这里了  
  
  

2020年9月10日 (四) 07:27的版本

优化

remove RDB固化

#dbfilename dump_7000.rdb

pre 常用脚本



 cat  /data/evan/redisloop.sh
#!/bin/bash
#usage  redisloop.sh   rr
cat  $1  | while read line
do

redis-cli    -c  -h    172.31.22.218   -p 7000  -a hell $line
redis-cli    -c  -h    172.31.22.218   -p 7001  -a hell   $line
redis-cli    -c  -h   172.31.16.135   -p 7002  -a hell   $line  
redis-cli    -c  -h   172.31.16.135   -p 7003  -a hell  $line
redis-cli    -c  -h   172.31.23.43   -p 7004  -a hell  $line
redis-cli    -c  -h   172.31.23.43   -p 7005  -a hell   $line
done


vi rr
del hello_coin_limit_045617153_2
del hello_coin_limit_9811460_2





 cat  redisin.sh 
#!/bin/bash
redis-cli    -c  -h    172.31.22.218   -p 7000  -a hello   `cat $1`
redis-cli    -c  -h    172.31.22.218   -p 7001  -a hello   `cat $1`
#
redis-cli    -c  -h   172.31.16.135   -p 7002  -a hello   `cat $1` #$1 # del hello_coin_list 
redis-cli    -c  -h   172.31.16.135   -p 7003  -a hello `cat $1` #$1 #del hello_coin_list 
# 
redis-cli    -c  -h   172.31.23.43   -p 7004  -a hello  `cat $1`#$1 #del hello_coin_list
redis-cli    -c  -h   172.31.23.43   -p 7005  -a hello   `cat $1` #$1 #del hello_coin_list

docker-compose

host 网络 要手工添加集群

同样要用firewall etc 要优化的地方 restart 已添加


相关脚本和配置 https://github.com/evan886/redis/tree/master/redis-cluster-docker_host 

Usage:
NOTE2020

#运行
docker-compose up -d

#要改的地方
bind   172.18.178.218 127.0.0.1


批量替换 sed  
sed -i 's!old!new!' filename

 sed  -i 's!5.0.2-alpine!5.0.9-alpine!' docker-compose.yml
   
 sed -i 's!192.168.11.236!172.31.16.4!' *.conf

aliyu 不能 绑定外网NAT IP   bind 内网IP 然后 创建集群用 外网IP就可以了 

不然后
(error) CLUSTERDOWN Hash slot not served  cluster没起来 

#docker exec -it  node-7000  redis-cli -p 7000  --cluster create  10.25.196.78:7000     10.25.196.78:7001  10.25.196.78:7002  10.25.196.78:7003  10.25.196.78:7004  10.25.196.78:7005  --cluster-replicas 1

IP='192.168.10.193'
docker exec -it  node-7000  redis-cli -p 7000  --cluster create  $IP:7000     $IP:7001  $IP:7002  $IP:7003  $IP:7004  $IP:7005  --cluster-replicas 1


# #要改的地方 不要交互
echo 'masterauth passwd123d 
requirepass passwd123d' >>redis-7000.conf




check 

docker exec -it  node-7000  redis-cli -p 7000  -c   -h 483.284.7.34 -a passwd12Trttt3d




bind 要记得改为你要的IP  如果用0.0.0.0 那就不要127.0.0.1 
有问题多看log 目录 

#这里是母机的ip 如果是三台机器 那么就有 三个 IP 
docker exec -it  node-7000  redis-cli -p 7000  --cluster create  ip:7000     ip:7001  ip:7002  ip:7003  ip:7004  ip:7005  --cluster-replicas 1

docker exec -it  node-7000  redis-cli -p 7000  --cluster create --cluster-replicas 1 ip:7000     ip:7001  ip:7002  ip:7003  ip:7004  ip:7005 

三台母机的情形 就是每个docker-compose.yml 只启动两个 ，其它的删除就行了  201912

数据损坏重做 2020

内网的193机器  PHP老是搞坏，或者强行restart os   常常会有几个节点起不来 这时 只能重新做 cluster 

 data 目录下的mv 走或删除掉 
 conf 目录下的 先去掉密码  
 up -d 起所有节点 
 conf 用追加再添加回密码 
 docker-compose restart 起回所有的节点

laradock方法

相关文件


#注意  网络是这个， 还有就是多台机器之间 也不太可能能这个网络 那样 容器之间的redis 是不通的 
NETWORKS_DRIVER=bridge 

less  docker-compose.yml 
### Redis Cluster evan##########################################
    redis-cluster:
      build: ./redis-cluster
      ports:
        - "${REDIS_CLUSTER_PORT_RANGE}:7000-7005"
      networks:
        - backend


cat  redis-cluster/Dockerfile  #注意 redis版本
FROM grokzen/redis-cluster:5.0.6
#FROM grokzen/redis-cluster:latest
LABEL maintainer="hareku <[email protected]>"

添加密码

添加密码 可以进入容器里面直接添加 ，不过不够好 ，有空要 放到母机出来，有如我上面
004  7005  redis-cluster.tmpl	redis.tmpl  sentinel.tmpl
root@401a49002b88:/data# ls /redis-conf/700
7000/ 7001/ 7002/ 7003/ 7004/ 7005/ 
root@401a49002b88:/data# ls /redis-conf/7000/redis.conf 
/redis-conf/7000/redis.conf
root@401a49002b88:/data# tail /redis-conf/7000/redis.conf 
bind 0.0.0.0
port 7000
cluster-enabled yes
cluster-config-file nodes.conf
cluster-node-timeout 5000
appendonly yes
dir /redis-data/7000


进入redis-cluster 容器 直接非交互  这里以7005 端口为例子 

redis-cli  -c  -h 127.0.0.1  -p 7005   config set masterauth 36DbRGvv66 
redis-cli  -c  -h 127.0.0.1  -p 7005   config set requirepass 36DbRGvv66 
redis-cli  -c  -h 127.0.0.1  -p 7005 auth  36DbRGvv66

redis-cli  -c  -h 127.0.0.1  -p 7005   -a 36DbRGvv66  config rewrite
redis-cli  -c  -h 127.0.0.1  -p 7005  config rewrite  # 最后这一步 有时得 加上密码 



Usage:  可以直接用物理机的ip  内网或者外网 

上次搞了几天 ，是忙晕了 不记得打开防火墙 7000-7005的端口

源码手工

单独安装redis-cli

debian 上可以单独安装 redis-cli 
但是rhel居然不行 只能编译一下  

make  -j  2 之后 ，copy 走这个 bin 文件就行了  is centos   make MALLOC=libc  zmalloc.h:50:31: fatal error: jemalloc/jemalloc.h: No such file or directory

./src/redis-cli -c   这个二进制包放        /usr/bin/  #或者放 /usr/sbin  只有超级用户可以用到  如果其它用户要用 就不要放这里了 


redis cluster 执行脚本 不用老是一个一个的搞 麻烦   其实只要在三个主上执行就行了 你6个全执行也没事，反正是脚本的 

#!/bin/bash
##Usage  bash redisin.sh   你的redis脚本
redis-cli    -c  -h    172.31.22.218   -p 7000  -a hello   `cat $1`
redis-cli    -c  -h    172.31.22.218   -p 7001  -a hello   `cat $1`
#
redis-cli    -c  -h   172.31.16.135   -p 7002  -a hello   `cat $1` #$1 # del hello_list

节点信息

角色                        主机名                                                             IP1               IP2       

7000  7001               01                   192.168.10.211     
7002  7003               02                   192.168.10.212      
7004  7005               03                   192.168.10.213

姐妹篇 Redis4 cluster

防火墙设置

第一台：
firewall-cmd --permanent --add-port=7000/tcp
firewall-cmd --permanent --add-port=17000/tcp
firewall-cmd --permanent --add-port=7001/tcp
firewall-cmd --permanent --add-port=17001/tcp
firewall-cmd --reload
firewall-cmd --list-all-zones
第二台：
firewall-cmd --permanent --add-port=7002/tcp
firewall-cmd --permanent --add-port=17002/tcp
firewall-cmd --permanent --add-port=7003/tcp
firewall-cmd --permanent --add-port=17003/tcp
firewall-cmd --reload
firewall-cmd --list-all-zones
第三台：
firewall-cmd --permanent --add-port=7004/tcp
firewall-cmd --permanent --add-port=17004/tcp
firewall-cmd --permanent --add-port=7005/tcp
firewall-cmd --permanent --add-port=17005/tcp
firewall-cmd --reload
firewall-cmd --list-all-zones

系统参数设置

#vi /etc/sysctl.conf
echo 'vm.overcommit_memory = 1
net.core.somaxconn = 1024' >>/etc/sysctl.conf

/sbin/sysctl -p /etc/sysctl.conf

redis 5 安装

#bash redisins.sh 2>&1 | tee redislog

wget -c http://download.redis.io/releases/redis-5.0.6.tar.gz
#set var
redis_install_dir=/data/apps/redis
redis_ver=5.0.6

THREAD=4
tar xzf redis-${redis_ver}.tar.gz
pushd redis-${redis_ver} > /dev/null

make  -j ${THREAD}

make PREFIX=${redis_install_dir} 
make distclean
#cd src && make install #这个才行 特别是cluster ? 2019年 8月16日 星期五 23时29分41秒 CST
make install  PREFIX=${redis_install_dir}  
echo "export PATH=${redis_install_dir}/bin/:$PATH" >> /etc/profile && source /etc/profile

####**********************下面是老的
wget -c http://download.redis.io/releases/redis-5.0.5.tar.gz
redis_install_dir=/home/apps/redis
redis_ver=5.0.5

THREAD=4
tar xzf redis-${redis_ver}.tar.gz
pushd redis-${redis_ver} > /dev/null
make  -j ${THREAD}
make PREFIX=/home/apps/redis #here
make distclean
#cd src && make install #这个才行 特别是cluster ? 2019年 8月16日 星期五 23时29分41秒 CST
make install  PREFIX=/home/apps/redis  # make install #这个有时没有创建出目录来呀

#这个我没做 根本没用 哈哈 
#复制rb 或者放到安装的bin目录 然后再加path 
#cp /opt/redis-5.0.0/src/redis-trib.rb /usr/local/bin

echo 'export PATH=/home/apps/redis/bin/:$PATH' >> /etc/profile && source /etc/profile
##**********************上面是老的
NOTE
redis5 用redis-cli创建整个redis集群(redis5以前的版本集群是依靠ruby脚本redis-trib.rb实现

创建节点

#第一台：192.168.10.211 #here
redis_install_dir=/data/apps/redis
 mkdir -p ${redis_install_dir}
cd ${redis_install_dir} 
mkdir -p redis_cluster
cd redis_cluster
mkdir data 7000 7001

#cp /root/src/redis-5.0.5/redis.conf  ${redis_install_dir}/redis_cluster
#cd  /home/apps/redis/redis_cluster
#cp redis.conf 7000/redis_7000.conf
#mv redis.conf  7001/redis_7001.conf


#第2台：192.168.10.212
redis_install_dir=/data/apps/redis
mkdir -p ${redis_install_dir}
cd ${redis_install_dir} 
mkdir -p redis_cluster
cd redis_cluster
mkdir data 7002 7003

#cp /root/src/redis-5.0.5/redis.conf  .
#cp  redis.conf 7002/redis_7002.conf
#mv redis.conf  7003/redis_7003.conf


#第3台：192.168.10.213
redis_install_dir=/data/apps/redis
mkdir -p ${redis_install_dir}
cd ${redis_install_dir} 
mkdir -p redis_cluster
cd redis_cluster
mkdir data 7004 7005
#cp /root/src/redis-5.0.5/redis.conf  .
#cp redis.conf 7004/redis_7004.conf
#mv redis.conf 7005/redis_7005.conf

修改配置文件(三台机器6个配置)

note  日志在系统那  因为我们配置文件没指定 /var/log/redis/

ls /home/apps/redis/redis_cluster/data/
appendonly-7000.aof  dump_7000.rdb  nodes_7000.conf
appendonly-7001.aof  dump_7001.rdb  nodes_7001.conf
# 生成在这里了  /home/apps/redis/redis_cluster/data/nodes_7000.conf  nodes_7001.conf

配置建议加上这个  下面这些配置还加上的 
# appendfsync always
appendfsync everysec
# appendfsync no

第一台：
 pushd /home/apps/redis/redis_cluster
mkdir -p /var/log/redis
: > 7000/redis_7000.conf
#vi 7000/redis_7000.conf
#非交互进行
echo 'port 7000
bind 192.168.10.211 127.0.0.1
cluster-enabled yes
appendfilename "appendonly-7000.aof"
cluster-config-file nodes_7000.conf 
cluster-node-timeout 15000
appendonly yes
appendfsync everysec
daemonize yes
dbfilename dump_7000.rdb
dir /data/apps/redis/redis_cluster/data 
logfile "/var/log/redis/7000.log"
protected-mode yes
pidfile /var/run/redis_7000.pid'>7000/redis_7000.conf


:>7001/redis_7001.conf
echo 'port 7001
bind 192.168.10.211 127.0.0.1
cluster-enabled yes
appendfilename "appendonly-7001.aof"
cluster-config-file nodes_7001.conf
cluster-node-timeout 15000
appendonly yes
appendfsync everysec
daemonize yes
dbfilename dump_7001.rdb
dir /home/apps/redis/redis_cluster/data 
logfile "/var/log/redis/7001.log"
protected-mode yes
pidfile /var/run/redis_7001.pid'>7001/redis_7001.conf


第二台 
 pushd /home/apps/redis/redis_cluster
mkdir -p /var/log/redis
:>7002/redis_7002.conf
echo 'port 7002
bind 192.168.10.212 127.0.0.1
cluster-enabled yes
appendfilename "appendonly-7002.aof"
cluster-config-file nodes_7002.conf
cluster-node-timeout 15000
appendonly yes
appendfsync everysec
daemonize yes
dbfilename dump_7002.rdb
dir /home/apps/redis/redis_cluster/data 
logfile "/var/log/redis/7002.log"
protected-mode yes
pidfile /var/run/redis_7002.pid' >7002/redis_7002.conf

:>7003/redis_7003.conf
echo 'port 7003
bind 192.168.10.212 127.0.0.1
cluster-enabled yes
appendfilename "appendonly-7003.aof"
cluster-config-file nodes_7003.conf
cluster-node-timeout 15000
appendonly yes
appendfsync everysec
daemonize yes
dbfilename dump_7003.rdb
dir /home/apps/redis/redis_cluster/data 
logfile "/var/log/redis/7003.log"
protected-mode yes
pidfile /var/run/redis_7003.pid'>7003/redis_7003.conf


第3台
 pushd /home/apps/redis/redis_cluster
mkdir -p /var/log/redis
:>7004/redis_7004.conf
echo 'port 7004
bind 192.168.10.213 127.0.0.1
cluster-enabled yes
appendfilename "appendonly-7004.aof"
cluster-config-file nodes_7004.conf
cluster-node-timeout 15000
appendonly yes
appendfsync everysec
daemonize yes
dbfilename dump_7004.rdb
dir /home/apps/redis/redis_cluster/data 
logfile "/var/log/redis/7004.log"
protected-mode yes
pidfile /var/run/redis_7004.pid ' > 7004/redis_7004.conf

:>7005/redis_7005.conf
echo 'port 7005
bind 192.168.10.213 127.0.0.1
cluster-enabled yes
appendfilename "appendonly-7005.aof"
cluster-config-file nodes_7005.conf
cluster-node-timeout 15000
appendonly yes
daemonize yes
dbfilename dump_7005.rdb
dir /home/apps/redis/redis_cluster/data 
logfile "/var/log/redis/7005.log"
protected-mode yes
pidfile /var/run/redis_7005.pid' >7005/redis_7005.conf

启动redis

#cd /usr/local/redis/etc/redis_cluster #on freebsd
第一台： #注意用 "" 不要'' 要替换变量的值
mkdir /var/log/redis
redis_install_dir=/data/apps/redis
echo  "redis_install_dir=/data/apps/redis
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7000/redis_7000.conf
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7001/redis_7001.conf">${redis_install_dir}/redis_cluster/run

chmod +x ${redis_install_dir}/redis_cluster/run && bash ${redis_install_dir}/redis_cluster/run
chmod  +x /etc/rc.d/rc.local
echo "${redis_install_dir}/redis_cluster/run" > >/etc/rc.d/rc.local #把变量替换为值,不建议用''

第二台
mkdir /var/log/redis
redis_install_dir=/data/apps/redis
echo "${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7002/redis_7002.conf
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7003/redis_7003.conf">${redis_install_dir}/redis_cluster/run

chmod +x ${redis_install_dir}/redis_cluster/run && bash ${redis_install_dir}/redis_cluster/run
chmod  +x /etc/rc.d/rc.local
echo "${redis_install_dir}/redis_cluster/run" > >/etc/rc.d/rc.local #把变量替换为值


第三台：
mkdir /var/log/redis
redis_install_dir=/data/apps/redis
echo "${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7004/redis_7004.conf
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7005/redis_7005.conf">${redis_install_dir}/redis_cluster/run

chmod +x ${redis_install_dir}/redis_cluster/run && bash ${redis_install_dir}/redis_cluster/run
chmod  +x /etc/rc.d/rc.local
echo "${redis_install_dir}/redis_cluster/run"  >>/etc/rc.d/rc.local #把变量替换为值

登陆redis

/home/apps/redis/bin/redis-cli  -c -h  192.168.10.211 -p 7000
redis-cli -h 10.3.10.141 -p 7001

redis-cli -h 10.3.10.142 -p 7002
redis-cli -h 10.3.10.142 -p 7003

redis-cli -h 10.3.10.143 -p 7004
redis-cli -h 10.3.10.143 -p 7005

创建集群

注意：在任意一台上运行 不要在每台机器上都运行，一台就够了
#要开通端口  firewalld
#在geany 有: 格式可能有点不对 要注意 
redis-cli --cluster create --cluster-replicas 1 192.168.10.211:7000 192.168.10.211:7001 192.168.10.212:7002 192.168.10.212:7003 192.168.10.213:7004  192.168.10.213:7005
#--replicas  1  表示 自动为每一个master节点分配一个slave节点    上面有6个节点，程序会按照一定规则生成 3个master（主）3个slave(从)

执行详情

 [root@dev-hello-1 redis_cluster]# redis-cli --cluster create --cluster-replicas 1 192.168.10.201:7000 192.168.10.201:7001 192.168.10.202:7002 192.168.10.202:7003 192.168.10.203:7004  192.168.10.203:7005
>>> Performing hash slots allocation on 6 nodes...
Master[0] -> Slots 0 - 5460
Master[1] -> Slots 5461 - 10922
Master[2] -> Slots 10923 - 16383
Adding replica 192.168.10.202:7003 to 192.168.10.201:7000
Adding replica 192.168.10.203:7005 to 192.168.10.202:7002
Adding replica 192.168.10.201:7001 to 192.168.10.203:7004
M: caf3a2c83f4f34498d9152161d3d62ca499094eb 192.168.10.201:7000
   slots:[0-5460] (5461 slots) master
S: ecbc0c648ff15c4ff2c176563afa580c7c8b7f3b 192.168.10.201:7001
   replicates 3792aae886d957e1a0272bcd198a06798f05c26d
M: 9c2f0b7827180d93371b493e8ca59b6eea776b0c 192.168.10.202:7002
   slots:[5461-10922] (5462 slots) master
S: b66f09b38e321ce3f8ee000b7cb40fe804f3a450 192.168.10.202:7003
   replicates caf3a2c83f4f34498d9152161d3d62ca499094eb
M: 3792aae886d957e1a0272bcd198a06798f05c26d 192.168.10.203:7004
   slots:[10923-16383] (5461 slots) master
S: a027592b56eb7477fe039786490318efdda8a0d6 192.168.10.203:7005
   replicates 9c2f0b7827180d93371b493e8ca59b6eea776b0c
Can I set the above configuration? (type 'yes' to accept): yes
>>> Nodes configuration updated
>>> Assign a different config epoch to each node
>>> Sending CLUSTER MEET messages to join the cluster
Waiting for the cluster to join
....
>>> Performing Cluster Check (using node 192.168.10.201:7000)
M: caf3a2c83f4f34498d9152161d3d62ca499094eb 192.168.10.201:7000
   slots:[0-5460] (5461 slots) master
   1 additional replica(s)
S: a027592b56eb7477fe039786490318efdda8a0d6 192.168.10.203:7005
   slots: (0 slots) slave
   replicates 9c2f0b7827180d93371b493e8ca59b6eea776b0c
M: 3792aae886d957e1a0272bcd198a06798f05c26d 192.168.10.203:7004
   slots:[10923-16383] (5461 slots) master
   1 additional replica(s)
M: 9c2f0b7827180d93371b493e8ca59b6eea776b0c 192.168.10.202:7002
   slots:[5461-10922] (5462 slots) master
   1 additional replica(s)
S: ecbc0c648ff15c4ff2c176563afa580c7c8b7f3b 192.168.10.201:7001
   slots: (0 slots) slave
   replicates 3792aae886d957e1a0272bcd198a06798f05c26d
S: b66f09b38e321ce3f8ee000b7cb40fe804f3a450 192.168.10.202:7003
   slots: (0 slots) slave
   replicates caf3a2c83f4f34498d9152161d3d62ca499094eb
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.

查看redis集群情况

redis-cli -h 192.168.10.211 -p 7000 cluster nodes

a027592b56eb7477fe039786490318efdda8a0d6 192.168.10.203:7005@17005 slave 9c2f0b7827180d93371b493e8ca59b6eea776b0c 0 1567502665000 6 connected
3792aae886d957e1a0272bcd198a06798f05c26d 192.168.10.203:7004@17004 master - 0 1567502666171 5 connected 10923-16383
9c2f0b7827180d93371b493e8ca59b6eea776b0c 192.168.10.202:7002@17002 master - 0 1567502664166 3 connected 5461-10922
ecbc0c648ff15c4ff2c176563afa580c7c8b7f3b 192.168.10.201:7001@17001 slave 3792aae886d957e1a0272bcd198a06798f05c26d 0 1567502664000 5 connected
caf3a2c83f4f34498d9152161d3d62ca499094eb 192.168.10.201:7000@17000 myself,master - 0 1567502663000 1 connected 0-5460
b66f09b38e321ce3f8ee000b7cb40fe804f3a450 192.168.10.202:7003@17003 slave caf3a2c83f4f34498d9152161d3d62ca499094eb 0 1567502665169 4 connected

cluster 完整性检查


redis-trib.rb check 10.3.10.140:7000
redis-trib.rb check 10.3.10.140:7001
redis-trib.rb check 10.3.10.140:7002
redis-trib.rb check 10.3.10.140:7003
redis-trib.rb check 10.3.10.140:7004
redis-trib.rb check 10.3.10.140:7005

结果如下  16384个槽都分配到了 节点 

[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.

测试

  
redis-cli -c -h  192.168.10.201 -p 7000

[root@dev-hello-1 redis_cluster]# redis-cli -c -h  192.168.10.201 -p 7000
192.168.10.201:7000> set evan 36
-> Redirected to slot [14924] located at 192.168.10.203:7004
OK
192.168.10.203:7004> 

[root@dev-hello-2 redis_cluster]# redis-cli -c -h  192.168.10.202 -p 7002
192.168.10.202:7002> get evan 
-> Redirected to slot [14924] located at 192.168.10.203:7004
"36"
192.168.10.203:7004> 

dev-hello-3 redis_cluster]#  redis-cli -c -h  192.168.10.203  -p 7005
192.168.10.203:7005> get evan
-> Redirected to slot [14924] located at 192.168.10.203:7004
"36"
192.168.10.203:7004>

测试通过了 




#20191113  
要加 -a 密码访问  不然老是提示要密码
[root@prod-02 ~]# redis-cli  -c -h 172.16.200.12 -p 7002
172.16.200.12:7002> auth ci1723
OK
172.16.200.12:7002> get evan
-> Redirected to slot [14924] located at 172.16.200.7:7004
(error) NOAUTH Authentication required.
172.16.200.7:7004> auth ci1723
OK
172.16.200.7:7004> get evan 
"56;"

添加redis集群密码

方式一：修改所有Redis集群中的redis.conf文件加入

 
#不要交互 
echo 'masterauth passwd123d 
requirepass passwd123d' >>redis-7000.conf



# NOTE   还是这个办法好  不然可能有些 没加载到配置文件去呢 
masterauth passwd123 
requirepass passwd123 
说明：这种方式需要重新启动各节点

方式二：进入各个实例进行设置 就是所有节点：不建议

 
redis-cli -c -h 10.3.10.141 -p 7001
#好像不能一起执行
config set masterauth 36DbRGvv 
config set requirepass 36DbRGvv 
auth  36DbRGvv
config rewrite 

添加redis集群密码 一开始忘记加-c 导致 143 两个都加不上了  redis本身的密码这样就有了

-a 后 再执行命令就再 auth ， 而如果是进入后 auth password 要每次 都再验证一下密码 麻烦

redis client redis-tools or redis-cli


下载 解压源码
sudo make -j 9
sudo cp  src/redis-cli  /usr/bin/redis-cli


开机自己启动

#非交互
redis_install_dir=/data/apps/redis
echo "${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7004/redis_7004.conf
${redis_install_dir}/bin/redis-server ${redis_install_dir}/redis_cluster/7005/redis_7005.conf">${redis_install_dir}/redis_cluster/run

chmod +x ${redis_install_dir}/redis_cluster/run && bash ${redis_install_dir}/redis_cluster/run
chmod  +x /etc/rc.d/rc.local
echo "${redis_install_dir}/redis_cluster/run"  >>/etc/rc.d/rc.local #把变量替换为值

#交互
vi /apps/redis/redis_cluster/run

/apps/redis/bin/redis-server /home/apps/redis/redis_cluster/7004/redis_7004.conf
/apps/redis/bin/redis-server /home/apps/redis/redis_cluster/7005/redis_7005.conf

chmod  +x  /apps/redis/redis_cluster/run
chmod +x /etc/rc.d/rc.local

 vi  /etc/rc.d/rc.local
/apps/redis/redis_cluster/run

开启关闭

redis-cli -a xxx -c -h 192.168.0.60 -p 8001 shutdown  #集群cluster_state变成了fail状态?  不过要服务正常的情况下才行

troubleshooting

收到报警 

Labels
alertname = vm_host_down
instance = redis://10.3.10.141:7000
job = redis_cluster

severity = page
Annotations
description = redis://10.3.10.141:7000 of job market_redis_cluster has been down for more than 1 minutes..
summary = Instance redis://10.3.10.141:7000 down



 7000 进程在但是 登录不进去 

日志如下 
03:01:16.166 # Unable to connect to MASTER: No such file or directory
22283:S 16 Jun 03:01:17.167 * Connecting to MASTER ?:7003
22283:S 16 Jun 03:01:17.175 # Unable to connect to MASTER: No such file or directory
22283:S 16 Jun 03:01:18.177 * Connecting to MASTER ?:7003


处理办法   
kill -9 7000的 再启动   暂时正常






ISCONF Errors writing to the AOF file: No space left on device; nested exception is redis.clients.jedis.exceptions.JedisDataException: MISCONF Errors writing to the AOF file: No space left on device

org.springframework.dao.InvalidDataAccessApiUsageException: MISCONF Errors writing to the AOF file: No space left on device; nested exception is redis.clients.jedis.exceptions.JedisDataException: MISCONF Errors writing to the AOF file: No space left on device

原因 有一个台redis的机器 空间100% 



tail  boot.log
[  OK  ] Started Network Time Service.
[FAILED] Failed to start /etc/rc.d/rc.local Compatibility.
See 'systemctl status rc-local.service' for details.

#启动rc-local 服务  on aliyun 不要不小心 不清空了  /etc/rc.d/rc.local
 systemctl enable  rc-local.service

redis 安装报错 jemalloc/jemalloc.h: No such file or directory

理上次编译残留文件，重新编译

make distclean  && make

导致出现这个错误的原因

　　错误的本质是我们在开始执行make 时遇到了错误（大部分是由于gcc未安装），然后我们安装好了gcc 后，我们再执行make ,这时就出现了jemalloc/jemalloc.h: No such file or directory。这是因为上次的


ERROR: for redis-cluster-8005  Cannot start service redis-cluster-8005: OCI runtime create failed: container_linux.go:346: starting container process caused "process_linux.go:449: container init caused \"rootfs_linux.go:58: mounting \\\"/home/redis-cluster-docker_host/conf/redis-8005.conf\\\" to rootfs \\\"/var/lib/docker/overlay2/f80340e6f1abc4aa43cde08ba4c5aa48787b092cbbbb64f01c5f0ad213d71368/merged\\\" at \\\"/var/lib/docker/overlay2/f80340e6f1abc4aa43cde08ba4c5aa48787b092cbbbb64f01c5f0ad213d71368/merged/usr/local/etc/redis/redis.conf\\\" caused \\\"not a directory\\\"\"": unknown: Are you trying to mount a directory onto a file (or vice-versa)? Check if the specified host path exists and is the expected type
ERROR: Encountered errors while bringing up the project.
[root@stage-secret-im-rabbitmq03 redis-cluster-docker_host]# docker -V 
^C
[root@stage-secret-im-rabbitmq03 redis-cluster-docker_host]# docker -v
Docker version 19.03.5, build 633a0ea
[root@stage-secret-im-rabbitmq03 redis-cluster-docker_host]# docker-compose  down 
Removing node-8004 ... done
Removing node-8005 ... done
Removing node-8003 ... done
Removing node-8001 ... done
Removing node-8002 ... done
Removing node-8006 ... done



断电后，node文件  nodes-7002.conf 内容中多了一个V 删除后正常

Creating Server TCP listening socket *:6379: bind: No such file or directory

问题描述

Creating Server TCP listening socket *:6379: bind: No such file or directory 解决思路

我这边检查之后发现Redis服务已经启动了 

   redis-cli 去看是否能连接上，进的去执行 shutdown 就断开连接，重新执行就可以启动 如果可以的话 
   ps -ef | grep redis 查看服务是否已经启动，kill -9 PID 杀掉服务重新启动

redis 安装报错 jemalloc/jemalloc.h: No such file or directory。

make jemalloc/jemalloc.h: No such file or directory

make时报如下错误：

zmalloc.h:50:31: error: jemalloc/jemalloc.h: No such file or directory
zmalloc.h:55:2: error: #error "Newer version of jemalloc required"
make[1]: *** [adlist.o] Error 1
make[1]: Leaving directory `/data0/src/redis-2.6.2/src'
make: *** [all] Error 2

原因是jemalloc重载了Linux下的ANSI C的malloc和free函数。解决办法：make时添加参数。

make MALLOC=libc

断电后 cluster损坏

1:M 31 Aug 2020 02:20:53.960 # Bad file format reading the append only file: make a backup of your AOF file, then use ./redis-check-aof --fix <filename>

不知道存放路径的可以查找find / -name redis-check-aof

apt install redis-tools

-7000.conf  nodes-7003.conf  temp-169.rdb

因为起不来的是 7004节点容器 所以有针对的 修复 命令如下 
root@cailuw-dev:/home/apps/redis_cluster/data# redis-check-aof --fix appendonly-7004.aof
The AOF appears to start with an RDB preamble.
Checking the RDB preamble to start:
[offset 0] Checking RDB file --fix
[offset 26] AUX FIELD redis-ver = '5.0.2'
[offset 40] AUX FIELD redis-bits = '64'
[offset 52] AUX FIELD ctime = '1598476864'
[offset 67] AUX FIELD used-mem = '3217224'
[offset 83] AUX FIELD aof-preamble = '1'
[offset 85] Selecting DB ID 0
[offset 226540] Checksum OK
[offset 226540] \o/ RDB looks OK! \o/
[info] 1999 keys read
[info] 134 expires
[info] 110 already expired
RDB preamble is OK, proceeding with AOF tail...
0x         2eaac6d: Expected prefix '*', got: '
AOF analyzed: size=48934026, ok_up_to=48933997, diff=29
This will shrink the AOF from 48934026 bytes, with 29 bytes, to 48933997 bytes
Continue? [y/N]: y
Successfully truncated AOF

Warning: AUTH failed

7002> get evan 
-> Redirected to slot [14924] located at 192.168.10.53:7004
Warning: AUTH failed
"36"


(error) ERR Client sent AUTH, but no password is set

cli版本太高了 
evan@myxps:~$ redis-cli  --version
redis-cli 6.0.6

see also

https://redis.io/topics/cluster-tutorial

http://redisdoc.com/topic/cluster-tutorial.html

Redis cluster集群：原理及搭建

（八）Redis集群常用命令、集群节点新增删除

redis集群，添加删除槽

redis-5.0 cluster带认证及客户端连接

Redis 5 之后版本的高可用集群搭建

Redis——Cluster集群搭建及节点的添加、删除


redis（二）集群 redis-cluster & redis主从同步

redis cluster查找key的流程


主从服务器与集群的区别以及Redis中主从服务器的搭建

redis cluser查看每个主节点管理的slot和从节点

redis 集群查看key在某一个具体的节点上

Redis 4集群配置

取自“http://wiki.linuxchina.net/index.php?title=Redis5_cluster&oldid=4621”