查看“Puppet基础”的源代码

=why=
 一切按官方文档是最好的哦 虽然英文Oct 27 2021 
salt 老是0day问题  ,为了安全 于是上puppet 现在文档真的很少,以前在dovo时,流行得很呢   于是有了本文

=install=

https://puppet.com/docs/puppet/7/install_agents.html#configure_server_setting

https://puppet.com/docs/puppetserver/5.3/intermediate_ca_configuration.html

https://puppet.com/docs/puppet/7/ssl_regenerate_certificates.html


==aliyun mirrors ==
https://developer.aliyun.com/mirror/puppet
https://mirrors.aliyun.com/puppet/

==* Enable the Puppet platform repository ==                                                                                                                                    
                                                                                                                                                                             
=== RH===
  可以用aliyun mirrors 会更加快 
 wget -c  https://mirrors.aliyun.com/puppet/yum/puppet7/el/7/x86_64/puppet7-release-7.0.0-1.el7.noarch.rpm &&  rpm -Uvh puppet7-release-7.0.0-1.el7.noarch.rpm

 rpm -Uvh https://yum.puppet.com/puppet6-release-el-7.noarch.rpm

=== debian 10  or kali 2021  只能是 buster 注意 ===                                                                                                                                                
 <pre>                                                                                                                                                                            
 记得要改为google dns 8.8.4.4 or alidns                                                                                                                                      
 #wget -c https://apt.puppetlabs.com/puppet6-release-buster.deb && dpkg  -i  puppet6-release-buster.deb              

#on my kali 
wget -c https://mirrors.aliyun.com/puppet/apt/puppet7-release-buster.deb &&  dpkg  -i puppet7-release-buster.deb
#https://mirrors.aliyun.com/puppet/apt/puppet6-release-buster.deb &&                                                         
                                                                                                                                                                             
 wget -c https://mirrors.aliyun.com/puppet/apt/puppet7-release-bullseye.deb        && dpkg -i  puppet7-release-bullseye.deb #debian 11                                                                                                                                                               
 #wget  https://apt.puppet.com/puppet7-release-buster.deb  && dpkg -i dpkg -i  puppet7-release-buster.deb                                                                     
 apt update       </pre>

== Installing Puppet Server  ==                                                                                                                                                
<pre>    
#base on RHEL 
yum install puppetserver

apt update                                                                                                                                                                          
 apt-get install puppetserver                                                                                                                                                
                                                                                                                                                                            
  sudo systemctl start puppetserver                                                                                                                                          
                                                                                                                                                                             
 /opt/puppetlabs/server/apps/puppetserver/bin/puppetserver  -v                                                                                                               
 puppetserver version: 6.14.1                                                                                                                                                
                                                                                                                                                                             
 cp /etc/profile  /etc/profileevanbak                                                                                                                                        
                                                                                                                                                                             
  echo 'export PATH=/opt/puppetlabs/server/apps/puppetserver/bin/:$PATH' >> /etc/profile                                                                                     
                                                                                                                                                                             
                                                                                                                                                                             
 apt-get install default-jdk                                                                                                                                                 
     </pre>                                                                                                                                                                         
                                                                                                                                                                             
                                                                                                                                                                             
 [https://zhuanlan.zhihu.com/p/86308378 如何在 Debian 10 上安装 OpenJDK11/OpenJDK8]                                                                                          
                                                                                                                                                                             
                                                                                                                                                                             
 [https://linuxhint.com/install_jdk_debian_10/ Installing JDK on Debian 10]                                                                                                  
                                                                                                                                                                             
 https://puppet.com/docs/puppet/6.19/server/install_from_packages.html

== * 3. Install Puppet agent ==
                                                                                                                                                 
=== ** RHEL ===
 rpm -Uvh  https://yum.puppet.com/puppet7-release-el-7.noarch.rpm                                                                                                         
                                                                                                                                                                             
 https://yum.puppet.com/puppet7-release-el-8.noarch.rpm                                                                                                                      
 https://yum.puppet.com/puppet6-release-el-7.noarch.rpm      

=====**   =====
 <pre> cat /etc/yum.repos.d/puppet7.repo 
[puppet7]
name=Puppet 7 Repository el 7 - $basearch
#baseurl=https://mirrors.aliyun.com/puppet/yum/puppet7/el/7/$basearch
baseurl=http://yum.puppetlabs.com/puppet7/el/7/$basearch
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-puppet7-release
       file:///etc/pki/rpm-gpg/RPM-GPG-KEY-2025-04-06-puppet7-release
enabled=1
gpgcheck=1


yum clean all
yum makecache
                                                                                                                                                                       
yum install puppet-agent  
                                                                                                                                                  
                                                                                                                                                                             
 echo 'export PATH=/opt/puppetlabs/bin:$PATH'  >> /etc/profile  && source /etc/profile                                                                                 
                                                                                                                                                                         https://puppet.com/docs/puppet/6.19/install_agents.html                                                                                                                     
                                                                                                                                                                             
 Start the Puppet service: sudo /opt/puppetlabs/bin/puppet resource service puppet ensure=running enable=true                                                                
 </pre>

=== ** deb  ===
<pre>  apt-get install puppet-agent

 source /etc/profile.d/puppet-agent.sh                           

</pre>
https://puppet.com/docs/puppet/7/install_agents.html

==* 4. Install PuppetDB (optional)==

= =

=configure=

https://puppet.com/docs/puppet/7/install_agents.html#agent_primary_server_connections

<pre>

# 要先配置hosts 

#On the agent node, run:
puppet config set server puppetserver.example.com --section main

#3. Connect the agent to the primary server and sign the certificate

# on agent  node
puppet ssl bootstrap

You will see a message that looks like:

Info: Creating a new RSA SSL key for <agent node>

#On the primary server node, sign the certificate:
#puppetsrver 
sudo puppetserver ca sign --certname <name>
#我是这个 其实最好不要这个 
puppetserver ca sign --all


#On the agent node, run the agent again:

puppet ssl bootstrap
</pre>
== 相关配置文件==
===code on server===
<pre>
最开始的样子
[root@r code]# tree 
.
├── environments
│   └── production
│       ├── data
│       ├── environment.conf
│       ├── hiera.yaml
│       ├── manifests
│       └── modules
└── modules

6 directories, 2 files
[root@code]# pwd
/etc/puppetlabs/code

</pre>

===puppet server ===
<pre>

#官方文档就是666 唯一瑕疵 就是配置hosts 和  certname = puppetserver.example.com 好像没说到 还是我没看到呢  这次配置完成用官方文档了,今天就用了删除原来的key good
cat /etc/hosts

127.0.0.1    puppetserver.example.com 
192.168.10.32    puppetserver.example.com 
192.168.10.39 puppetagent
192.168.10.33 puppetagent2

cat /etc/puppetlabs/puppet/puppet.conf

# This file can be used to override the default puppet settings.
# See the following links for more details on what settings are available:
# - https://puppet.com/docs/puppet/latest/config_important_settings.html
# - https://puppet.com/docs/puppet/latest/config_about_settings.html
# - https://puppet.com/docs/puppet/latest/config_file_main.html
# - https://puppet.com/docs/puppet/latest/configuration.html
[server]
vardir = /opt/puppetlabs/server/data/puppetserver
logdir = /var/log/puppetlabs/puppetserver
rundir = /var/run/puppetlabs/puppetserver
pidfile = /var/run/puppetlabs/puppetserver/puppetserver.pid
codedir = /etc/puppetlabs/code
[master]
certname = puppetserver.example.com

</pre>

===agent ===
<pre>
cat /etc/hosts
127.0.0.1	localhost
#127.0.1.1	puppetserver.example.com	puppetserver
192.168.10.32 	puppetserver.example.com	puppetserver
127.0.1.1	puppetagent

cat /etc/puppetlabs/puppet/puppet.conf 
[main]
server = puppetserver.example.com
# This file can be used to override the default puppet settings.
# See the following links for more details on what settings are available:
# - https://puppet.com/docs/puppet/latest/config_important_settings.html
# - https://puppet.com/docs/puppet/latest/config_about_settings.html
# - https://puppet.com/docs/puppet/latest/config_file_main.html
# - https://puppet.com/docs/puppet/latest/configuration.html
[agent]
runinterval=30

</pre>

=== agent2===
<pre>
cat /etc/hosts
127.0.0.1	localhost
127.0.1.1	puppetagent2
#debian11


192.168.10.32    puppetserver.example.com 

root@puppetagent2:~# cat /etc/puppetlabs/puppet/puppet.conf 
[main]
server = puppetserver.example.com
[agent]
runinterval=30

</pre>

 这里的明天再补上 Sep 26

=添加 agent node(全新安装) 和证书配置=


==add hosts==
=== add hosts on  server===
<pre>

#puppet 
#home
127.0.0.1    puppetserver.example.com 
192.168.10.32    puppetserver.example.com 
192.168.10.39 puppetagent
192.168.10.33 puppetagent2
192.168.10.38 puppetagent38


192.168.2.200 proxy-intra

</pre>


=== add config and  hosts on  agent ===
<pre>
cat /etc/hosts

192.168.10.32    puppetserver.example.com 

cat /etc/puppetlabs/puppet/puppet.conf 
[main]
server = puppetserver.example.com

[agent]
runinterval=30

</pre>

=添加 agent node(非全新安装) 和证书配置=
官方文档最6  
https://puppet.com/docs/puppet/7/ssl_regenerate_certificates.html
<pre>
puppetserver ca   list  --all
Signed Certificates:

    idc-test-all-db-192-168-10-120-c7          (SHA256)  AF:EA:3F:3D:97:71:04:76:5D:5B:B2:C2:91:98:2A:1:7A:19:44:F6:BD:B2:EB:B2:F1:2E:95:CA:D3:06	alt names: ["DNS:idc-test-all-db-192-168-10-120-c7"]


#先删除原来存在的了key  on server   这几步 也是 puppet rror: The certificate for 'CN=' does not match its private key的解决办法 
puppetserver ca clean --certname  idc-test-all-db-192-168-10-120-c7 
puppetserver ca clean --certname idc-test-all-php-192-168-10-122-c7


#如果有老的key 不是新安装 
cd  /etc/puppetlabs/puppet/ssl/certs/
rm  -f ca.pem  idc-test-all-db-192-168-10-120-c7.pem

# if on node  puppet client 
systemctl  restart puppet


#agent node 
root@debian11# puppet ssl bootstrap
Info: csr_attributes file loading from /etc/puppetlabs/puppet/csr_attributes.yaml
Info: Creating a new SSL certificate request for idc-test-all-php-192-168-10-122-c7
Info: Certificate Request fingerprint (SHA256): 7D:9F:B7:68:B3::84:06:6D:90:49:9C:8F:76:D7:3A:25:C9:98:E0:2F:0D:39:E1:95:A6:BB:EE:B1:27
Info: Certificate for idc-test-all-php-192-168-10-122-c7 has not been signed yet
Couldn't fetch certificate from CA server; you might still need to sign this agent's certificate (idc-test-all-php-192-168-10-122-c7).
Info: Will try again in 120 seconds.

#这个是接受后成功的提示 ,如果只有这个提示 没有前面的 那就是在servrer 存在了相同的了 
Notice: Completed SSL initialization



#sever 上接受 成功喽 
#单独一个  
puppetserver ca sign --certname  puppet2021

puppetserver ca sign   --all
Successfully signed certificate request for idc-test-all-php-192-168-10-122-c7



#这个命令还是不成功 
puppetserver ca sign  idc-test-all-php-192-168-10-122-c7


例如
#最后在master 接受的证书名是以hostname的哦  最好是事先起好hostname,虽然我hosts文件配置为puppet38 配置任务用这个也是成功的 ,不过还是不够规范
 puppetserver ca sign   --all
Successfully signed certificate request for debian11


</pre>

=默认30分钟太久=
<pre>
#on agent  120 秒  ,2 分钟 
vi  /etc/puppetlabs/puppet/puppet.conf 
[agent]
server = master.test.cn
runinterval=120

</pre>

=入门例子=
<pre>
#安装到所有节点  默认是半个小时成效 可以手工执行
 cat /etc/puppetlabs/code/environments/production/manifests/site.pp
node default {
    package { 'emacs':
     ensure => present,
  }
}



# 笨方法  两个节点安装 w3m 
 cat /etc/puppetlabs/code/environments/production/manifests/site.pp
node 'puppetagent' {
    package { 'w3m':
     ensure => present,
  }
}
node 'puppetagent2' {
    package { 'w3m':
     ensure => present,
  }
}
</pre>
==第一个file 例子==
<pre>
#on server
#cat /etc/puppetlabs/code/environments/production/manifests/site.pp
node default {
    file { "/tmp/oct28.txt":
     content => "hey  first puppet file";
  }
}


#结果 随便找个 agent node 
root@puppetagent:~# cat /tmp/oct28.txt 
hey  first puppet file

</pre>

==第一个shell 命令例子==
<pre>
 cat site.pp
node default {
    Exec {path =>"/bin:/sbin:/bin/sh:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin"}
    exec { "touch files":
     command => "/usr/bin/touch /tmp/mytouch.txt";
  }
}


</pre>

=video=
[https://www.bilibili.com/video/BV1H7411u7mu?p=5 Puppet自动化运维企业实战]

=进阶=
[https://www.cnblogs.com/along21/p/10369858.html  企业级自动化运维工具---puppet详解 ]

[https://www.cnblogs.com/keerya/p/8040071.html  自动化运维工具——puppet详解（一） ]

[https://www.cnblogs.com/keerya/p/8087675.html  自动化运维工具——puppet详解（二） ]

=see also=

=references=
https://en.wikipedia.org/wiki/Puppet_(software)


[https://www.cnblogs.com/baizhantang/p/3208210.html  puppet批量管理500多台服务器 ]

[https://www.cnblogs.com/kevingrace/p/5740984.html  Puppet常识梳理 ]

[http://www.srcmini.com/41406.html Puppet组件详解]

[http://www.srcmini.com/41401.html Puppet类用法示例]


[https://www.cnblogs.com/krainbow/p/4212056.html  puppet多环境配置（puppet自动化系列2） ]

[https://www.cnblogs.com/krainbow/p/4212048.html  puppet初始化安装和配置（puppet自动化系列1） ]

[https://www.meirenji.info/2018/09/03/puppet%E8%87%AA%E5%8A%A8%E5%8C%96%E5%B8%83%E7%BD%B2%E9%85%8D%E7%BD%AE%E5%85%A5%E9%97%A8/ puppet自动化布署配置入门]


[https://www.cnblogs.com/sddai/p/11031885.html  Puppet自动化管理配置 ]

[https://www.jianshu.com/p/63234d526866 puppet入门]

[https://blog.51cto.com/u_433266/2176059?xiangguantuijian&06 Puppet 实验五 软件安装测试]

Usage 

[https://www.zsythink.net/archives/331  puppet入门：puppet使用基础（puppet 5） ]


[https://www.linuxidc.com/Linux/2012-12/75979.htm Puppet批量部署实际案例]

[https://www.cnblogs.com/Dicky-Zhang/p/6260127.html puppet的配置]

==应用例子 ==

[https://blog.51cto.com/forall/1913534  Puppet批量部署tomcat]

[https://blog.csdn.net/weixin_33964094/article/details/92921026  Puppet批量部署tomcat]


[[category:devops]]