查看“Set up CGI with Apache on kali Linux”的源代码

[[category:ops]]  [[category:]] 
= ins httpd=
 sudo apt-get install apache2
=config=
<pre>
理论上只动这两个配置
/etc/apache2/apache2.conf
/etc/apache2/conf-available/serve-cgi-bin.conf


mkdir /var/www/cgi-bin
cd /var/www/cgi-bin/

sudo vi  /etc/apache2/apache2.conf

并在末尾添加以下内容

###################################################################
#########     Adding capaility to run CGI-scripts #################
ServerName localhost
ScriptAlias /cgi-bin/ /var/www/cgi-bin/
Options +ExecCGI
AddHandler cgi-script .cgi .pl .py


sudo vi  /etc/apache2/conf-available/serve-cgi-bin.conf

#修改成如下所示： 原来的最好backup
<IfModule mod_alias.c>
	<IfModule mod_cgi.c>
		Define ENABLE_USR_LIB_CGI_BIN
	</IfModule>

	<IfModule mod_cgid.c>
		Define ENABLE_USR_LIB_CGI_BIN
	</IfModule>

	<IfDefine ENABLE_USR_LIB_CGI_BIN>
		#ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
		#<Directory "/usr/lib/cgi-bin">
		#	AllowOverride None
		#	Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
		#	Require all granted
		#</Directory>

		## cgi-bin config
		ScriptAlias /cgi-bin/ /var/www/cgi-bin/
	    <Directory "/var/www/cgi-bin/">
	        AllowOverride None
	        Options +ExecCGI
	    </Directory>

	</IfDefine>
</IfModule>


使用以下命令启用CGI模块。此命令创建模块配置文件到/etc/apache2/mod-enabled/ 目录下的软链接。

sudo a2enmod cgi

udo service apache2 restart

cd /var/www/cgi-bin
touch hello.py
chmod o+x hello.py

sudo vi  hello.py  #cgi等等文件名也行 

#!/usr/bin/python3

print("Content-Type: text/html;charset=utf-8")
print ()
print ("你好啊，evan")

打开浏览器 IP/cgi-bin/hello.py

</pre>


=see also=
[https://zhuanlan.zhihu.com/p/144602086 Kali配置Python版cgi环境，并运行第一个程序。]