查看“Expect基础”的源代码

 [[category:shell]] 
=Question=
有个项目要迁移 新来一批机器 要做初始化 于是抽空练了一下expect 
=利用expect批量添加pubkey=
==多台添加pubkey ==
<pre>
cat main 
#!/bin/bash
for ip   in `cat list` 

do 
#echo $ip
./addkey  $ip

done 



cat addkey 
#!/usr/local/bin/expect
 #define var
set timeout 17
# #<==接受第一个参数，赋值host
set host [lindex $argv 0]
set password "evan=="


#spawn
spawn ssh-copy-id  -i /home/evan/lx/ssh/opspub root@$host
#spawn ssh-copy-id  -i /home/evan/.ssh/id_rsa.pub root@$host
#ssh-copy-id  -i /home/evan/.ssh/id_rsa.pub root@121.41.101.200

#expect
expect {                  
 "*yes/no" { send "yes\r"; exp_continue}   
 "*password:" { send "$password\r" }       
 }  
#send  "exit\r"  
expect eof

cat list 
192.168.7.4
192.168.7.46

##上面用了copy-id  如果想用scp  etc 

    #!/usr/bin/expect    
    set timeout 5    
    set hostno [lindex $argv 0]    
    spawn scp ~/.ssh/id_dsa.pub impala$hostno:~/.ssh/pub_key    
    expect "*password*"    
    send "111111\r"    
    spawn ssh impala$hostno "cat ~/.ssh/pub_key/ >> ~/.ssh/authorized_keys"    
    expect "*password*"    
    send "111111\r"    
    spawn ssh impala$hostno "chmod 600 ~/.ssh/authorized_keys"    
    expect "*password*"    
    send "111111\r"    
    expect eof    

（3）分析：
set可以设置超时，或者设置一个变量的值
spawn是执行一个命令
expect等待一个匹配的输出流中的内容
send是匹配到之后向输入流写入的内容
[lindex $argv 0]表示脚本的第0个参数
expect eof表示读取到文件结束符

</pre>

==多台添加ssh安全(远程执行命令和退出) ==
<pre>
 cat   run
#!/usr/local/bin/expect
 #define var
set timeout 17
set host [lindex $argv 0]
set password "evan=="

#spawn
spawn ssh root@$host

expect {

    "*#*" { send "sed -i 's/#PubkeyAuthentication yes/PubkeyAuthentication yes/g' /etc/ssh/sshd_config\r";
send "sed -i 's/^PasswordAuthentication yes/PasswordAuthentication no/g' /etc/ssh/sshd_config\r"
send "systemctl restart sshd\r"
	#send "\r"
    }
}
send  "exit\r"  
expect eof

cat main
#!/bin/bash
for ip   in `cat list` 

do 
#echo $ip
#./addkey  $ip
./run  $ip

done 

#run 
bash main 
</pre>

==单个==
<pre>

vi addkey

#!/usr/local/bin/expect
#SERVERS="101.00.208.197 120.40.043.52 " 
set timeout 5   
set host [lindex $argv 0]
spawn ssh-copy-id  -i /home/evan/.ssh/id_rsa.pub root@$host
#ssh-copy-id  -i /home/evan/.ssh/id_rsa.pub root@12.41.11.290
expect {                  
 "*yes/no" { send "yes\r"; exp_continue}   
 "*password:" { send "P2xMGipLpSG7dA==\r" }       
 }  

expect eof


用法 
	./addkey  18.80.216.19 #这是你的IP 
</pre>

=on dovo=
<pre>
#!/usr/bin/expect
#good on new kali  这个在新的kali 上是ok的
set timeout 30
set sshIP "4.88.1.2"
set keypassword "ZdvV"
set rootPassword "5D"
#spawn ssh -o StrictHostKeyChecking=no -i /root/key  evan@$sshIP
expect "Enter passphrase"
send "$keypassword\r"
expect "]$"
send "sudo -i\r"
expect "xxxxx"
send "$rootPassword\r"
expect "]#"
## run command
#send "cat /root/1  && echo 'test was ok .';exit\r"
#send "bash /data/tmp/dbins   && echo 'dbins  was ok.';exit\r"
#expect "52wan"
#send "exit\r"
#expect eof {exit 0}
interact


#!/usr/bin/expect
# on old kali  这个在老的kali
set timeout 30
set sshIP "4.88.1.2"
set keypassword "Zd"
set rootPassword "5D"
spawn ssh -o StrictHostKeyChecking=no -i /home/key  evan@$sshIP
expect "Enter passphrase"
send "$keypassword\r"
expect "52wan"
send "sudo -i\r"
expect "password for 52wan:"
send "$rootPassword\r"
expect "]#"
## run command
#send "cat /root/1  && echo 'test was ok .';exit\r"
#send "bash /data/tmp/dbins   && echo 'dbins  was ok.';exit\r"
#expect "52wan"
#send "exit\r"
#expect eof {exit 0}
interact

</pre>