|
|
第1行: |
第1行: |
− | =arm= | + | =buy= |
− | 用自己的树霉试一下 常用的软件能不能用先 有空再过半年buy a arm apple laptop
| + | 有空买个4 |
| + | 树莓派 3 Model B+,其价格仍是 34.95 美元(¥238 RMB) |
| + | 原来那家服务态度非常不好 换一家 |
| | | |
− | https://www.pine64.org/pinebook-pro/ | + | [https://mall.jd.com/index-153636.html 树莓派jd专卖店] |
| | | |
− | https://zhuanlan.zhihu.com/p/38719508
| |
| | | |
− | [https://post.smzdm.com/p/a5kqwmxx/ 外媒观点对撞,ARM 版 Mac 到底值不值得买?| PCWorld :不要再买 Mac 产品 ]
| + | == 要买的配件== |
| + | HDIM 线, 5V 3A 电源线,散热片,外壳带风扇,闪迪卡 其实OS安装完后 只要 电源 连上网 直接ssh |
| | | |
− | [https://linuxtoy.org/archives/lightweight-portable-desktop-with-pine64.html Pine64 轻量级便携电脑 ]
| + | ==版本== |
| + | 最早代工厂UK的SONY,然后是中国E14,前几个月又开设第三代工厂日本的RS Components,理论上没区别。 |
| + | 因为博通的Soc一般人也搞不到,所以树莓派也没有假冒。 |
| | | |
− | =NOTE=
| + | 基金会和 Element14(易络盟电子)在英国伦敦全球同步发售树莓派2代B型,当然全球还有另外一个代理商RS(欧时电子)也一样有全球的销售权。 |
− | 下载东西 or 传输东西 记得最后 md5 or sham 一下
| |
| | | |
− | 闪屏问题 参考 xps 相关wiki
| + | 三个版本我都有,英国版价格最贵用料一般u口的质量不如中国版,英国版还有很大的糊味。 |
| + | 中国版包装最漂亮,清晰脱俗 |
| + | 日版价格低廉好像噪音大一些 |
| | | |
− | =xps=
| + | DIY过程中,分别同位置切割三个版本电路板,最后日版直接不开机,英国版tf口不读卡,中国版一切正常。暴力测试仅供参考 |
− | 主要目录挂在 data 所以作各种 ln
| |
− | ln -s data/evanhome/python/ python
| |
| | | |
− | =老旧计算机=
| + | 当RS版和E络盟版放在一起之后,我们先从外包装上看,E络盟包装盒不失美观且硬度强,里面还附有一本多国语言资料,显得有档次,而RS版树莓派外包装,也美观,但是太柔软啦,经不起外力压迫,拿在手上瞬间掉档。 |
− | https://antixlinux.com/
| + | 再看USB卡槽,E络盟是打了盘符的,为安普品牌的,RS则没有,根据惯例可能是山寨的。 |
− | =2020=
| + | 再看摄像头插槽,E络盟为黑色,RS为白色,但当我们使用的时候会发现,RS的摄像头插槽比较松弛,间歇大,虽然不影响使用,但是时间久了,谁知道会不会出现问题呢,再看E络盟的摄像头插槽,不松弛间歇合理。 |
| + | 接着我们再看大家反映的最普遍的问题,这个问题丛B+版本就开始出现,那就是TF卡槽,两种版本外观上看不出来区别,但是RS版本经常出现一个问题,将TF卡插进之后,居然可以拔出来,虽然不影响使用,但让我们不得不怀疑RS的做工啊,国产山寨手机的TF卡槽貌视也没有这个问。 |
| + | 就说这几点吧,至于焊接问题,RS说他们采用的焊接技术先进,E络盟也说他们采用的技术更先进,我只能说都不影响使用,但通过以上几点可能让我对E络盟的更有信心,当今世界顶级的电子设备基本都是外国研发中国制造。RS的背面就不说了啊,像修过一样,脏。 |
| | | |
− | 將硬盘模式由RAID 可以进入原来的win
| + | [http://tieba.baidu.com/p/3582699166?pid=68736180608&cid=0# Element14和RS版本的区别 ] |
− | 改为ACHI 就进入其它第三方os
| |
| | | |
− | [https://www.dell.com/support/article/zh-cn/sln308010/ubuntu-win10 Ubuntu ®/WIN10双系统安装教程 ]
| + | =install= |
| | | |
− | https://www.dell.com/support/article/zh-cn/sln301754/%E5%A6%82%E4%BD%95%E5%9C%A8-dell-pc-%E4%B8%8A%E5%AE%89%E8%A3%85-ubuntu-%E5%92%8C-windows-8-%E6%88%9610%E4%BD%9C%E4%B8%BA%E5%8F%8C%E5%BC%95%E5%AF%BC?lang=zh
| + | Raspbian Jessie With PIXEL 和 Raspbian Jessie Lite,它们的区别在于前者带有 PIXEL 的图形界面易用性更高,后者是不带图形界面的版本,特点是占用空间非常小。(我自己有一个项目不需要图形界面,且 |
| | | |
− | <pre>
| + | [https://www.jianshu.com/p/9ea87f129948 第3章 让树莓派运行起来] |
− | 第一步在 win中分区中压缩出给unix的空间
| |
− | [[Win10系统相关]]
| |
− | 现在要什么改bios为AHI 原来的是ran0 on 是不是得重启安装win 问一下售后
| |
− | 更改xps13的硬盘模式
| |
− | | |
− | Dell xps13 的硬盘模式有三种:RAID(默认)模式; ACHI模式;以及以上两种的混合模式。RAID模式下我们是无法安装ubuntu的,于是在开机dell图标的时候猛按F2进入BIOS选项,將硬盘模式由RAID改为ACHI, 在更改时系统会提醒若更改可能会导致无法逆转的问题,其实没关系,确认更改。注意,更改了硬盘模式之后是无法在进入win10的,所以这时候可以在USB接口插好我们准备好的ubuntu安装盘了,在系统重启进入dell图标界面时,
| |
− | 猛按F12(不用按fn)进入boot界面选用U盘启动,进入ubuntu安装界面然后正常安装就好。关于安装ubuntu时的分区,我参考了网上的教程,采用以下分区:
| |
− | | |
− | | |
− | 分区完成后,不要急着下一步,这里还要选择 安装启动引导器的设备
| |
− | | |
− | 选择boot所在的分区 /dev/sda ?
| |
− | </pre>
| |
− | | |
− | xps 13 7390 安装双系统
| |
− | | |
− | | |
− | linuxqq 在debian 10上用 sh 安装是成功的 weixin用一下 docker那个 就不用虚拟机了
| |
− | | |
− | | |
− | | |
− | | |
− | [https://blog.csdn.net/JJ951001/article/details/104565862 安装参考这个喽 ]
| |
− | 一开始不要安装太多桌面 就先xfce作备用 然后再上awesome
| |
− | | |
− | 默认安装,想要更多工具
| |
− | sudo apt-get -y install kali-linux-large
| |
− | | |
− | [https://blog.csdn.net/zouguo1211/article/details/81200628 安装过程 有grub2修复呢]
| |
− | | |
− | | |
− | [https://blog.csdn.net/weixin_41247970/article/details/104118700 kali 2020.1安装(图文超详细版)]
| |
− | | |
− | | |
− | [https://blog.csdn.net/MiaodXindng/article/details/104397988 kali linux 2020.1安装注意事项]
| |
− | | |
− | =debian=
| |
− | <pre>
| |
− | UNetbootin
| |
− | | |
− | debian-.0.0-amd64-xfce-CD-1.iso 安装后
| |
− | 如果还有方块需要装字体:
| |
− | | |
− | apt-get install ttf-wqy-zenhei #我试过这个就行了
| |
− | $ reboot
| |
− | $ apt-get install ttf-arphic-uming
| |
− | | |
− | | |
− | | |
− | # testing
| |
− | | |
− | # http://mirrors.ustc.edu.cn/debian/dists/
| |
− | deb http://mirrors.ustc.edu.cn/debian testing main contrib non-free
| |
− | # deb-src http://mirrors.ustc.edu.cn/debian testing main contrib non-free
| |
− | deb http://mirrors.ustc.edu.cn/debian testing-updates main contrib non-free
| |
− | # deb-src http://mirrors.ustc.edu.cn/debian stable-updates main contrib non-free
| |
− | | |
− | # deb http://mirrors.ustc.edu.cn/debian stable-proposed-updates main contrib non-free
| |
− | # deb-src http://mirrors.ustc.edu.cn/debian stable-proposed-updates main contrib non-free
| |
− | | |
− | #deb http://mirrors.aliyun.com/debian/ testing main non-free contrib
| |
− | ##deb-src http://mirrors.aliyun.com/debian/ testing main non-free contrib
| |
− | #deb http://mirrors.aliyun.com/debian-security testing/updates main
| |
− | ##deb-src http://mirrors.aliyun.com/debian-security testing/updates main
| |
− | #deb http://mirrors.aliyun.com/debian/ testing-updates main non-free contrib
| |
− | ##deb-src http://mirrors.aliyun.com/debian/ testing-updates main non-free contrib
| |
− | #deb http://mirrors.aliyun.com/debian-backports/ bullseye-backports main non-free contrib
| |
− | ##deb-src http://mirrors.aliyun.com/debian-backports/ testing-backports main non-free contrib
| |
− | #
| |
− | #deb https://mirrors.163.com/debian-backports/ buster-backports main contrib non-free
| |
− | #deb-src https://mirrors.163.com/debian-backports/ buster-backports main contrib non-free
| |
− | | |
− | | |
− | sudo apt-get update
| |
− | sudo apt-get upgrade
| |
− | sudo apt-get dist-upgrade
| |
− | | |
− | </pre>
| |
− | | |
− | 你正在运行 Debian稳定版 因为你更偏好选择 Debian 稳定版分支。它运行得很好,但是只有一个问题:与其他发行版相比,它的软件有一点过时了。这便是 backports 出现的原因。
| |
− | | |
− | Backports是从testing版本 (大部分)和 unstable版本(可能性极小,例如:安全更新等)重新编译的软件包,因此他们在稳定的debian发行版中不需要新的库就可以运行(无论如何,这是可能的)。推荐你挑选一个能够满足你需求的单个的backports软件源,不要使用所有可用的backports源。
| |
− | | |
− | [https://wiki.debian.org/zh_CN/Backports zh_CNBackports ]
| |
− | | |
− | [https://www.debian.cn/archives/45 如何使用 Debian backports 更新源]
| |
− | | |
− | https://wiki.debian.org/HowToUpgradeKernel
| |
− | | |
− | | |
− | [https://zhuanlan.zhihu.com/p/76991840 安装Debian并开启远程桌面(通过Xorg)]
| |
− | | |
− | [https://www.linuxtechi.com/things-to-do-after-installing-debian-10/ Top 8 Things to do after Installing Debian 10 (Buster)]
| |
− | | |
− | =start=
| |
− | 此文适合于 debian10初始化 20190730
| |
− | | |
− | | |
− | Debian_stretch 也就是 debian 9 这也是kali2018
| |
− | == 最常用软件==
| |
− | <pre> ;geany ; catfish 文件查看; 现在用 rofi 这个不用了synapse (上次回车运行不了软件是 自己小小心 把运行配置设置为f2); zim ; ;
| |
− |
| |
− | hardInfo 硬件查看
| |
− | | |
− | alias halt='/usr/bin/sudo /bin/sync && /usr/bin/sudo /sbin/poweroff'
| |
− | </pre>
| |
− | | |
− | == xps13 7390问题==
| |
− | <pre>
| |
− | 过一阵就会自动闪屏
| |
− | | |
− | | |
− | FN+向上 亮度
| |
− | | |
− | </pre>
| |
− | | |
− | ==国内iso下载地址==
| |
− | | |
− | | |
− | kali 的国内官方镜像为东软信息学院 所以下载地址有两个
| |
− | | |
− | http://mirrors.neusoft.edu.cn/kali-images/
| |
− | | |
− | 公司这个下载比较快
| |
− | | |
− | http://mirrors.163.com/kali-images/
| |
− | | |
− | https://mirrors.ustc.edu.cn/kali-images
| |
− | | |
− | https://www.turnkeylinux.org/
| |
− | | |
− | <pre>
| |
− | evan@evankali:~/iso$ sha256sum kali-linux-2017.2-amd64.iso
| |
− | 4556775bfb981ae64a3cb19aa0b73e8dcac6e4ba524f31c4bc14c9137b99725d kali-linux-2017.2-amd64.iso
| |
− | | |
− | time sudo dd if=xxxxx.iso of=/dev/sdc && sync # real 23m33.039s
| |
− | 或者用什么 img32 linux 下还可以用 etcher U盘镜像复制工具
| |
− | | |
− | 国内源 加在最前面
| |
− | | |
− | deb https://mirrors.dgut.edu.cn/kali kali-rolling main non-free contrib
| |
− | deb-src https://mirrors.dgut.edu.cn/kali kali-rolling main non-free contrib
| |
− | | |
− | sudo apt-get update
| |
− | </pre>
| |
− | | |
− | ===Create bootable USB drives===
| |
− | https://rufus.ie/
| |
− | | |
− | sudoapt-getinstallusb-creator-gtk
| |
− | | |
− | | |
− | https://www.balena.io/etcher/
| |
− | | |
− | | |
− | win下的hash tools hash my files divhasher
| |
− | | |
− | [https://docs.fedoraproject.org/en-US/quick-docs/creating-and-using-a-live-installation-image/ creating-and-using-a-live-installation-image]
| |
− | | |
− | http://www.ubuntukylin.com/public/pdf/1910.pdf
| |
− | | |
− | ==debian==
| |
− | [https://cdimage.debian.org/cdimage/unofficial/non-free/ 附带专有固件的非官方镜像]也已更新,如果您发现Debian与某个硬件不兼容,这些非自由版本很有用。
| |
− | <pre>
| |
− | sudo apt-get install -y dnsutils#dig
| |
− | </pre>
| |
− | ===debian elite 无线驱动 iwlwifi-7260-17.ucode===
| |
− | <pre>
| |
− | debian 10 elite 无线驱动 iwlwifi-7260-17.ucode
| |
− | | |
− | #wifi 添加源
| |
− | deb http://mirrors.163.com/debian/ buster main contrib non-free
| |
− | | |
− | apt install firmware-iwlwifi wireless-tools
| |
− | </pre>
| |
− | | |
− | ===常用包安装===
| |
− | <pre>
| |
− | sudo apt install net-tools
| |
− | </pre>
| |
− | | |
− | ==pre==
| |
− | [[Parrot安装]]
| |
− | <pre>
| |
− | 如果发现不是中文界面 settings -->Region &language 选择中国 再次登录就是中文了
| |
− | | |
− | 允许root登录
| |
− | #PermitRootLogin prohibit-password
| |
− | PermitRootLogin yes #/etc/init.d/ssh restart
| |
− | | |
− | 新用户 debain 系统建议用adduser
| |
− | adduser evan #这个是交互的
| |
− | | |
− | useradd evan -m -s /bin/bash -g evan
| |
− | | |
− | #is debian
| |
− | apt install sudo -y
| |
− |
| |
− | echo 'evan ALL=(ALL) NOPASSWD:NOPASSWD:ALL' >/etc/sudoers.d/evan
| |
− | | |
− | 回收站 .local/share/Trash/files/
| |
− | </pre>
| |
− | [[useradd与adduser的区别]]
| |
− | | |
− | ==分区==
| |
− | <pre>
| |
− | kalilatop / 27G 建议大一些好 我的现在是20G 昨晚更新时就空间不太够 清理了今天一个上午 ,昨天还搞到半夜
| |
− | cd /var/cache/apt/archives && rm -rf *.deb
| |
− | | |
− | 在公司电脑上 居然要安装成 /home不独立出来,不然会安装不成功 搞笑 第一天不行 第二天又可以 了 哈哈 #应该是硬盘没删除成功 我发现还有 原来的数据呀
| |
− | </pre>
| |
− | | |
− | ==theme==
| |
− | <pre>
| |
− | sudo apt install oxygen-icon-theme
| |
− | | |
− | lxappearance (0.6.1-1)
| |
− | LXDE GTK+ theme switcher
| |
− | | |
− | </pre>
| |
− | https://github.com/paullinuxthemer/Mc-OS-themes
| |
− | | |
− | ==输入法==
| |
− | ===fcitx===
| |
− | | |
− | fcitx can not use in ff rednotebook etc apps on debina 10 testing 更新完就可以了
| |
− | | |
− | | |
− | <pre> sudo apt-get install fcitx fcitx-table-wbpy ttf-wqy-microhei ttf-wqy-zenhei
| |
− | | |
− | | |
− | #官方提示
| |
− | 设置 用户设置 /home/evan/.xinputrc 为 fcitx。
| |
− | 手动设置选择: fcitx
| |
− | 小企鹅输入法(Fcitx)
| |
− | * 必需组件:fcitx
| |
− | * 输入特定语言所需的组件:
| |
− | * 简体中文拼音:fcitx-sunpinyin 或 fcitx-googlepinyin 或 fcitx-pinyin
| |
− | * 简体中文五笔:fcitx-table-wubi 或 fcitx-table-wbpy
| |
− | * 繁体中文:fcitx-table-cangjie
| |
− | * 通用的输入法码表: fcitx-table* 套件
| |
− | * 应用程序支持:
| |
− | * GNOME/GTK+:fcitx-frontend-gtk2 和 fcitx-frontend-gtk3
| |
− | (强烈建议同时安装)
| |
− | * KDE/Qt4:fcitx-frontend-qt4
| |
− | | |
− | | |
− | | |
− | | |
− | | |
− | 用户设置 已被 im-config 修改。
| |
− | | |
− | 请重新启动 X 会话管理器以激活新的 用户设置。
| |
− | 如果使用旧配置的守护进程被 X 会话管理器重启,您可能需要使用 kill(1) 手工将其杀死。
| |
− | 请参考 im-config(8) 和 /usr/share/doc/im-config/README.Debian.gz
| |
− | | |
− | | |
− | # skin
| |
− | | |
− | 下载皮肤并解压缩到下面任一目录,如果没有可以新建目录:
| |
− | | |
− | /usr/share/fcitx/skin ##全局设置
| |
− | ~/.config/fcitx/skin #特定用户设置
| |
− | | |
− | | |
− | debian kali
| |
− | | |
− | ls /usr/share/fcitx/skin/
| |
− | classic dark default google sogou
| |
− | | |
− | | |
− | freebsd
| |
− | | |
− | .config/fcitx/skin/
| |
− | Alpha google material sogou startos</pre>
| |
− | | |
− | 皮肤下载 sogou 不错
| |
− | http://mirrors.163.com/deepin/pool/main/f/fcitx-skins/
| |
− | | |
− | [https://wiki.archlinux.org/index.php/Fcitx_(%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87) arch fcitx]
| |
− | | |
− | [https://www.cnblogs.com/findumars/p/5364701.html Linux下Qt4与qt5的程序使用输入法(ibus与fcitx)不冲突 ] | |
− | | |
− | | |
− | [https://plumz.me/archives/4180/ 解决 Ubuntu 16.04 下 Telegram Fcitx 不能加载的问题]
| |
− | | |
− | ===ibus===
| |
− | <pre>
| |
− | #sudo apt-get install ibus-gtk ibus-table-wubi ibus-wayland ibus-pinyin ibus-sunpinyin
| |
− | #不好用 暂时不用 现在又用了 2020 ibus-setup
| |
− | | |
− | ibus-setup
| |
− | | |
− | 在$HOME/.bashrc中加入下面这段就好了
| |
− | | |
− | export GTK_IM_MODULE=ibus
| |
− | export XMODIFIERS=@im=ibus
| |
− | export QT_IM_MODULE=ibus
| |
− | | |
− | | |
− | </pre>
| |
− | [https://blog.csdn.net/wu10188/article/details/86540464 Ubuntu 18.04 配置ibus中文拼音输入法(超简单)]
| |
− | | |
− | ==openssh==
| |
− | <pre>
| |
− | apt-get install openssh-client openssh-server
| |
− | 这个要先安装 不然自启动会不成功
| |
− | | |
− | 如何激活服务并在启动时启用或禁用服务(即系统启动时自动启动服务)
| |
− | # systemctl is-active ssh.service
| |
− | systemctl enable ssh.service
| |
− | # systemctl disable ssh.service
| |
− | </pre>
| |
− | | |
− | [http://www.cnblogs.com/yinheyi/p/6266748.html debian系统下安装ssh服务超级详细]
| |
− | | |
− | == 更新系统==
| |
− | <pre>
| |
− | #配置源 又可以改为国内源了 记得在去年是不可以的 20180222 2020
| |
− | #eg
| |
− | | |
− | sed -i "s@http://.*archive.ubuntu.com@http://mirrors.huaweicloud.com@g" /etc/apt/sources.list
| |
− | sed -i "s@http://.*security.ubuntu.com@http://mirrors.huaweicloud.com@g" /etc/apt/sources.list
| |
− | | |
− | | |
− | | |
− | | |
− | deb https://mirrors.ustc.edu.cn/kali kali-rolling main non-free contrib
| |
− | deb-src https://mirrors.ustc.edu.cn/kali kali-rolling main non-free contrib
| |
− | | |
− | #aliyun是最快的 配置上他的dns 2020 但是官方源才是软件最新的哦
| |
− | deb http://mirrors.aliyun.com/kali kali-rolling main non-free contrib
| |
− | #deb-src http://mirrors.aliyun.com/kali kali-rolling main non-free contrib
| |
− | #deb http://mirrors.aliyun.com/kali-security kali-rolling/updates main contrib non-free
| |
− | #deb-src http://mirrors.aliyun.com/kali-security kali-rolling/updates main contrib non-free
| |
− | #
| |
− | #office
| |
− | #deb https://http.kali.org/kali kali-rolling main non-free contrib
| |
− | #deb http://http.kali.org/kali kali-rolling main non-free contrib
| |
− | | |
− | kali 的国内官方镜像为东软信息学院
| |
− | 所以只要dns是国内 应该 会自动去东软信息学院mirrors的
| |
− | | |
− | apt-get update
| |
− | | |
− | #一般只更新自己要的软件就好了,不要全系统更新 容易挂 再说 很多软件更新也没用嘛
| |
− | apt install xxxx # apt list --upgradable |less 查看软件
| |
− | apt upgrade
| |
− | apt-get dist-upgrade #跨版本更新 ; 发布版升级
| |
− | | |
− | apt update && apt full-upgrade #升级2018的官方 命令
| |
− | </pre>
| |
− | ===更新系统故障===
| |
− | <pre> evan@kalipc:~/github/python/tutorial$ sudo apt update
| |
− | 获取:1 http://mirrors.aliyun.com/kali kali-rolling InRelease [30.5 kB]
| |
− | 错误:1 http://mirrors.aliyun.com/kali kali-rolling InRelease
| |
− | | |
− | | |
− | 正在读取软件包列表... 完成
| |
− | W: GPG 错误:http://mirrors.aliyun.com/kali kali-rolling InRelease: 下列签名无效: EXPKEYSIG ED444FF07D8D0BF6 Kali Linux Repository <[email protected]> | |
− | E: 仓库 “http://mirrors.aliyun.com/kali kali-rolling InRelease” 没有数字签名。
| |
− | N: 无法安全地用该源进行更新,所以默认禁用该源。
| |
− | #使用root 运行此命令
| |
− | root@kalipc:~# wget -q -O - https://archive.kali.org/archive-key.asc | apt-key add
| |
− | OK </pre>
| |
− | [https://www.kali.org/news/kali-linux-2018-1-release/ Kali Linux 2018.1 Release]
| |
− | | |
− | ==添加 home分区==
| |
− | <pre>
| |
− | cp -a .bash_history .chromium-bsu .gnupg/ .pki/ .ssh/ .xinputrc .bak
| |
− | | |
− | 把所以 . 隐藏的文件 先 ls . 然后得出的 放到 .bak目录 最后再放出来
| |
− | | |
− | | |
− | 算了 直接搞个/data分区了
| |
− | mkfs.ext4 /dev/nvme0n1p9
| |
− | | |
− | | |
− | blkid /dev/nvme0n1p9
| |
− | | |
− | cat /etc/fstab
| |
− | # /etc/fstab: static file system information.
| |
− | #
| |
− | # Use 'blkid' to print the universally unique identifier for a
| |
− | # device; this may be used with UUID= as a more robust way to name devices
| |
− | # that works even if disks are added and removed. See fstab(5).
| |
− | #
| |
− | # <file system> <mount point> <type> <options> <dump> <pass>
| |
− | # / was on /dev/nvme0n1p8 during installation
| |
− | UUID=8239d727-9b16-4e03-bf2d-d05766db6a2e / ext4 errors=remount-ro 0 1
| |
− | # /boot/efi was on /dev/nvme0n1p1 during installation
| |
− | UUID=0848-0943 /boot/efi vfat umask=0077 0 1
| |
− | # swap was on /dev/nvme0n1p7 during installation
| |
− | UUID=753c3bee-a5b7-4de4-b0bf-1d971622d47a none swap sw 0 0
| |
− | # /home was on /dev/nvme0n1p9 during installation
| |
− | UUID=a90d5fe4-482b-458a-bc8b-fd733fd963d2 /data ext4 errors=remount-ro 0 1
| |
− | | |
− | | |
− | </pre>
| |
− | | |
− | ==添加新硬盘==
| |
− | <pre>
| |
− | UUID=d94216fb-5712-dc44-ad1e-98534d6e4bae /mydata ext4 defaults 0 2
| |
− | #后来成为home 要记得改为 /home
| |
− | mkdir /home/evan/data
| |
− | uuid 查看
| |
− | blkid
| |
− | blkid /dev/sdb1
| |
− | | |
− | #mydata 2T hdd 2018年 09月 25日 星期二 10:22:06 CST
| |
− | #/dev/sdb1 /home/evan/data ext4 defaults 0 0
| |
− | UUID=7664f2b3-ee40-4861-aed4-c6fd223126ac /home/evan/data ext4 defaults 0 2
| |
| | | |
− | fstab 改为 /dev/sdb1 就好了 而不是UUID 可能和XFCE mount有关系 后来用uuid已正常 重分区系统也是同一个板 同一个CPU 不能在别的板搞过来
| + | [https://www.raspberrypi.org/downloads/raspbian/ Raspbain Stretch Lite 树莓派官方系统,不带图形界面 下载] |
− | | |
− | 此问题 后来确定为让 sata线位置
| |
− | | |
− | fdiskl -l Partition 1 does not start on physical sector boundary.
| |
− | 用命令行gpt 分区后 老提示空间不够 后来 用gparted 重新分区好了
| |
− | | |
− | | |
− | 2021
| |
− | root@k8s-master:~# blkid /dev/sdb1
| |
− | /dev/sdb1: UUID="7664f2b3-ee40-4861-aed4-c6fd223126ac" TYPE="ext4" PARTUUID="c7b67401-1c52-4394-a779-e473df6c2a94"
| |
− | | |
− | #/etc/fstab
| |
− | UUID=7664f2b3-ee40-4861-aed4-c6fd223126ac /mydata ext4 errors=remount-ro 0 1
| |
− | | |
− | | |
− | </pre>
| |
− | | |
− | == install Awesome ==
| |
− | <pre>
| |
− | 这个的问题是安装后 gdm 选择了 依然进入gnome3 在家里用 vbox 试过也是尴尬了呢
| |
− | 解决办法是 ,可以不用安装kde
| |
− | apt install lightdm lxrandr
| |
− | #apt-get install kde-plasma-desktop
| |
− | 其实是gdm3 识别不了awesome 而ssdm可以识别,那其实也可以试一下 是不是只安装其它dm就可以了
| |
− | </pre>
| |
− | [[Awesome]]
| |
− | | |
− | == install xmonad ==
| |
− | 曾经放弃 现在 又回来了,没声音也是在mate打开一下就有了呢
| |
− | | |
− | [[xmonad安装及入门配置]]
| |
− | | |
− | 安装完好像进入不了呢 原因和楼上一样
| |
− | [http://blog.linuxchina.net/?p=1880 xmonad 安装及入门配置]
| |
− | | |
− | ==install lxde==
| |
− | apt-get install lxde
| |
− | | |
− | | |
− | [https://www.cnblogs.com/bu-wu-zheng-ye/p/4760919.html 在Debian上用FVWM做自己的桌面] | |
− | | |
− | ==备份[[Clonezilla]] ==
| |
− | | |
− | == install mate ==
| |
− | <pre>
| |
− | #在公司的电脑不用安装这个了
| |
− | sudo apt-get update
| |
− | #This will install the base packages required for a minimal MATE desktop
| |
− | sudo apt-get install mate-desktop-environment-core
| |
− | | |
− | #This will install the complete MATE desktop
| |
− | sudo apt-get install mate-desktop-environment
| |
− | | |
− | #This will install the complete MATE desktop including a few extras
| |
− | sudo apt-get install mate-desktop-environment-extras
| |
− | </pre>
| |
− | http://wiki.mate-desktop.org/download
| |
− | | |
− | ==xrandr Multi-monitor==
| |
− | <pre>
| |
− | 图形界面的用 lxrandr XRandR
| |
− | | |
− | #if hdmi on home
| |
− | | |
− | #只开启外外接显示器并关闭本本自带显示器 省电
| |
− | xrandr --output HDMI-1 --mode 1920x1080 --output LVDS-1 --off
| |
− | | |
− | xrandr --output HDMI-1 --same-as LVDS-1 --mode 1366x768 --output HDMI-1 --mode 1920x1080
| |
− | | |
− | | |
− | 多显示器
| |
− | 今天使用了xrandr命令,似乎可以检测到扩展屏,之后详细看了xrandr的用法,运用 addmode 和 output 命令 结果可以用的!!!
| |
− | | |
− | </pre>
| |
− | [http://blog.linuxchina.net/?p=1441 linux桌面(Dedian Ubuntu kali) 多显示器支持]
| |
− | | |
− | [https://www.dell.com/support/article/zh-cn/sln129825/%E5%A6%82%E4%BD%95%E8%AE%BE%E7%BD%AE%E5%A4%9A%E6%98%BE%E7%A4%BA%E5%99%A8?lang=zh 如何设置多显示器]
| |
− | | |
− | [http://blog.linuxchina.net/?p=285 xrandr — fvwm 双显示器]
| |
− | | |
− | https://www.dell.com/community/Laptops-General-Read-Only/XPS-13-2in1-How-Many-External-Monitors-on-One-USB-C/td-p/5104782
| |
− | | |
− | [https://simonhawketts.co.uk/2017/02/27/multiple-monitors-on-a-dell-xps-13/ multiple-monitors-on-a-dell-xps-13]
| |
− | | |
− | https://wiki.archlinux.org/index.php/Multihead
| |
− | | |
− | https://wiki.debian.org/DualMonitorDualServerOneInput
| |
− | | |
− | ==外观==
| |
− | lxappearance
| |
− | lxqt 外观设置 qt风格用 qt5 other kali-light 不然 vlc 可能不好看
| |
− | | |
− | ==all4one==
| |
− | <pre>sudo apt install tree anjuta geany zim remmina vlc -y #synapse spyder
| |
− | #sudo apt-get install fcitx fcitx-table-wbpy ttf-wqy-microhei ttf-wqy-zenhei
| |
− | sudo apt-get install alarm-clock-applet
| |
− | #eclipse emacs pycharm chrome 自己独立安装 </pre>
| |
− | | |
− | ==解决没有声音: ==
| |
− | <pre>
| |
− | sudo apt install pulseaudio
| |
− | systemctl --user enable pulseaudio && systemctl --user start pulseaudio
| |
− | systemctl --user enable pulseaudio #打开声音控制就好了
| |
− | 打开打开声音控制 然后
| |
− | 语音控制--输入设备--输入插孔 记得好个小锁头要打开
| |
− | | |
− | 还有 就是 输出设备为 模拟耳机 20181023
| |
− | | |
− | 可能还有回放要 chrome
| |
− | </pre>
| |
− | | |
− | == install applications==
| |
− | 大不了在启动是 用 win+R 先启动kupfer
| |
− | | |
− | ===launcher===
| |
− | ====[[Awesome#rofi_on_awesome|rofi_on_awesome]]====
| |
− | ====synapse====
| |
− | | |
− | 快捷键一般设置 为menu(win右边那个) 实在不行就设置 为 win +` or ctrl+1
| |
− | | |
− | ====kupfer====
| |
− | ====gnome-do====
| |
− | apt-get install gnome-do gnome-do-plugins.
| |
− | | |
− | ===[[Linux 下的护眼软件]]===
| |
− | | |
− | | |
− | === 系统还原===
| |
− | timeshift
| |
− | https://github.com/teejee2008/timeshift
| |
− | === 视频播放===
| |
− | ==== vlc====
| |
− | apt install vlc # 也有升级功能 继续播放功能升级为3.0.6 版本就可以了 有皮肤 在插件管理器里
| |
− | | |
− | ==== smplaye====
| |
− | <pre>echo 'deb http://download.opensuse.org/repositories/home:/smplayerdev/Debian_9.0/ /' > /etc/apt/sources.list.d/home:smplayerdev.list
| |
− | apt-get update
| |
− | sudo apt-get install smplaye# 好用 可提高音量到200% 看py 教程非常 爽 vlc都没这么好 也可手工下载包安装 </pre>
| |
− | | |
− | [http://wiki.ubuntu.org.cn/SMPlayer SMPlayer使用]
| |
− | | |
− | [https://software.opensuse.org/download.html?project=home%3Asmplayerdev&package=smplayer smplayer安装教程]
| |
− | | |
− | [http://wiki.ubuntu.org.cn/Qref/Apps#.E8.A7.86.E9.A2.91.E6.92.AD.E6.94.BE 软件参考]
| |
− | | |
− | === 办公软件 ===
| |
− | | |
− | ====xpad====
| |
− | ====abiword and gnumeric====
| |
− | | |
− | ====libreoffice====
| |
− | [http://blog.linuxchina.net/?p=132 libreoffice installation]
| |
− | | |
− | [https://zh-cn.libreoffice.org/download/fonts/ 适用于 LibreOffice 的中日韩字体]
| |
− | | |
− | https://zh-cn.libreoffice.org/get-help/install-howto/linux/
| |
− | | |
− | ==== wps====
| |
− | http://community.wps.cn/download/
| |
− | <pre>
| |
− | 问题
| |
− | 依赖关系问题使得 wps-office 的配置工作不能继续:
| |
− | wps-office 依赖于 libpng12-0;然而:
| |
− | 未安装软件包 libpng12-0。
| |
− |
| |
− | wget http://ftp.cn.debian.org/debian/pool/main/libp/libpng/libpng12-0_1.2.49-1+deb7u2_amd64.deb
| |
− | sudo dpkg -i libpng12-0_1.2.49-1+deb7u2_amd64.deb
| |
− | sudo dpkg -i wps-office_10.1.0.5672-a21_amd64.deb
| |
− | </pre>
| |
− | | |
− | [https://itaken.github.io/post/2017/05/03/libpng12-0%E6%9C%AA%E5%AE%89%E8%A3%85%E9%94%99%E8%AF%AF.html libpng12-0未安装错误]
| |
− | | |
− | [http://community.wps.cn/wiki/No_necessary_symbol_fonts wps字体]
| |
− | | |
− | ===Notes ===
| |
− | https://wiki.gnome.org/Design/Apps/Notes
| |
− | | |
− | === CAD ===
| |
− | ==== freecad====
| |
− | sudo add-apt-repository ppa:freecad-maintainers/freecad-stable
| |
− | sudo apt update
| |
− | sudo apt install freecad
| |
− | | |
− | [https://www.sysgeek.cn/linux-cad-software/ 适用于Linux系统的5款最佳CAD软件汇总]
| |
− | | |
− | https://wiki.freecadweb.org/Install_on_Unix/zh-cn
| |
− | | |
− | https://launchpad.net/~freecad-maintainers/+archive/ubuntu/freecad-stable
| |
− | | |
− | https://github.com/FreeCAD/FreeCAD/releases/tag/0.18.4
| |
− | | |
− | | |
− | [https://linuxtoy.org/archives/6-of-the-best-free-linux-cad-software.html 6 款高品质的免费 Linux CAD 应用程序]
| |
− | | |
− | === email ===
| |
− | ====[[thunderbird]]====
| |
− | ===GNURadio===
| |
− | GNURadio 是免费的软件开发工具套件。它提供信号运行和处理模块,用它可以在易制作的低成本的射频(RF)硬件和通用微处理器上实现软件定义无线电。 这套套件广泛用于业余爱好者,学术机构和商业机构用来研究和构建无线通信系统。
| |
− | https://www.gnuradio.org/
| |
− | | |
− | == emacs26 in Ubuntu 18.04==
| |
− | <pre>
| |
− | sudo add-apt-repository ppa:kelleyk/emacs
| |
− | sudo apt update
| |
| | | |
− | sudo apt install emacs26
| + | https://www.raspbsd.org/ |
| | | |
− | root@myxps:/usr/share/applications# cat emacs25.desktop
| + | [https://blog.csdn.net/kxwinxp/article/details/78370913 树莓派3B+ 安装系统] |
− | [Desktop Entry]
| |
− | Version=1.0
| |
− | Name=GNU Emacs 25 (GUI)
| |
− | GenericName=Text Editor
| |
− | Comment=GNU Emacs is an extensible, customizable text editor - and more
| |
− | MimeType=text/english;text/plain;text/x-makefile;text/x-c++hdr;text/x-c++src;text/x-chdr;text/x-csrc;text/x-java;text/x-moc;text/x-pascal;text/x-tcl;text/x-tex;application/x-shellscript;text/x-c;text/x-c++;
| |
− | TryExec=/usr/bin/emacs25
| |
− | Exec=/usr/bin/emacs25 %F
| |
− | Icon=emacs25
| |
− | Type=Application
| |
− | Terminal=false
| |
− | Categories=Utility;Development;TextEditor;
| |
− | StartupWMClass=Emacs
| |
− | Keywords=Text;Editor;
| |
− | root@myxps:/usr/share/applications# cp emacs25.desktop emacs.desktop
| |
− | root@myxps:/usr/share/applications# emacs -nw emacs.desktop
| |
− | root@myxps:/usr/share/applications# cat emacs.desktop
| |
− | [Desktop Entry]
| |
− | Version=1.0
| |
− | Name=GNU Emacs 26 (GUI)
| |
− | GenericName=Text Editor
| |
− | Comment=GNU Emacs is an extensible, customizable text editor - and more
| |
− | MimeType=text/english;text/plain;text/x-makefile;text/x-c++hdr;text/x-c++src;text/x-chdr;text/x-csrc;text/x-java;text/x-moc;text/x-pascal;text/x-tcl;text/x-tex;application/x-shellscript;text/x-c;text/x-c++;
| |
− | TryExec=/usr/bin/emacs26
| |
− | Exec=/usr/bin/emacs26 %F
| |
− | Icon=emacs25
| |
− | Type=Application
| |
− | Terminal=false
| |
− | Categories=Utility;Development;TextEditor;
| |
− | StartupWMClass=Emacs
| |
− | Keywords=Text;Editor;
| |
| | | |
| + | [https://blog.csdn.net/weixin_39449466/article/details/80686835 树莓派3B+安装系统(Raspbian] |
| | | |
− | </pre>
| + | [https://post.smzdm.com/p/738951/ 树莓派3B+折腾记 篇一:入门折腾—系统安装] |
− | http://ubuntuhandbook.org/index.php/2019/04/gnu-emacs-26-2-released-install-in-ubuntu-18-04/
| + | [https://sspai.com/post/38542 树莓派入门指南|明明白白玩 Pi 系列] |
− | === emacs25===
| |
− | apt install emacs -y
| |
| | | |
− | [[How to Compile Emacs on Linux]] | + | [http://wiki.nxez.com/rpi:list-of-oses 树莓派操作系统大全] |
| | | |
− | [[Emacs入门]] | + | [https://my.oschina.net/swtar/blog/867200 树莓派,我们走! - 选购] |
| | | |
− | ===文件管理===
| + | [https://www.kali.org/tutorials/secure-kali-pi-2018/ Secure Kali Pi 2018] |
− | apt install pcmanfm-qt # thunar
| |
| | | |
| + | =openssh= |
| <pre> | | <pre> |
− | #gedit 另外到 mousepad
| + | Launch Raspberry Pi Configuration from the Preferences menu |
− | cat /usr/share/applications/gedit.desktop
| + | Navigate to the Interfaces tab |
− | [Desktop Entry]
| + | Select Enabled next to SSH |
− | Name=gedit
| + | Click OK |
− | Comment[zh_CN]=简易文本编辑器
| |
− | GenericName=Text Editor
| |
− | GenericName[zh_CN]=文本编辑器
| |
− | GenericName[zh_TW]=文字編輯程式
| |
− | Exec=mousepad %F
| |
− | Icon=accessories-text-editor
| |
− | Terminal=false
| |
− | StartupNotify=true
| |
− | Type=Application
| |
− | Categories=Utility;TextEditor;GTK;
| |
− | MimeType=text/plain;
| |
− | | |
| </pre> | | </pre> |
| | | |
− | === 终端软件===
| + | 在 /boot/ 目录 touch a file call ssh |
− | apt install terminator #tilix # ssh tools pacmanager | + | Linux 用户打开 TF 卡中名称为 boot 且内存较小的主分区),在 TF 卡根目录放置一个名为 ssh 的空白文件(注:无后缀名 |
− | | |
− | [[terminator基础]]
| |
− | | |
− | ===[[下载工具]]===
| |
− | | |
− | | |
− | === music===
| |
− | ==== deadbeef====
| |
− | [http://deadbeef.sourceforge.net/download.html 建议用deadbeef直接下载deb包]
| |
− | | |
− | [http://deadbeef.sourceforge.net/plugins.html plugins]
| |
− | ====qmmp====
| |
− | [https://www.howtoing.com/how-to-get-the-most-out-of-qmmp-1-0/ 如何充分利用Qmmp 1.0]
| |
− | | |
− | 皮肤下载 然后 ctrl+p 选择你下载的 .wsz skinsfile
| |
− | http://qmmp.ylsoftware.com/files/skins
| |
− | | |
− | [http://vinmusic.com/tool/qmmp/ ubuntu下的音频播放器: Qmmp]
| |
− | | |
− | ==== quodlibet====
| |
− | <pre># deb http://lazka.github.io/ql-debian/testing/ quodlibet-unstable/
| |
− | sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 5A62D0CAB6264964
| |
− | sudo apt-get update
| |
− | sudo apt-get install quodlibet</pre>
| |
| | | |
− | ====Audacity ====
| + | https://www.raspberrypi.org/documentation/remote-access/ssh/ |
− | [[Audacity音频处理]]
| |
− | Audacity 多轨跨平台的音频编辑软件
| |
| | | |
− | === install rednotebook=== | + | =docker= |
− | [https://github.com/collinss/sticky Sticky Notes便笺]
| |
| <pre> | | <pre> |
− | #太老版本,不建议用
| + | 直接运行dockerd 直接运行可以 查看错误日志方便详细查看 |
− | #apt-get install rednotebook
| |
− | | |
− | sudo apt-get install noblenote
| |
− | | |
− | | |
− | #2020 jul
| |
− | wget -c https://github.com/jendrikseipp/rednotebook/archive/v2.19.tar.gz
| |
− | | |
− | sudo apt install python3-yaml
| |
− | | |
| | | |
− | rednotebook$ sudo python3 setup.py install
| + | 注意官方 只能用这个方法2021 |
| | | |
| + | Raspbian users cannot use this method! |
| + | For Raspbian, installing using the repository is not yet supported. You must instead use the convenience script. |
| | | |
− | #or 问题 新版本的图片看不到了
| |
− | wget -c https://github.com/jendrikseipp/rednotebook/archive/v2.19.tar.gz
| |
− | #wget -c --no-check-certificate https://github.com/jendrikseipp/rednotebook/archive/v2.6.1.tar.gz
| |
− | tar xvf v2.6.1.tar.gz
| |
− | sudo mv rednotebook-2.6.1 /opt/rednotebook
| |
− | vi /usr/share/applications/rednotebook.desktop
| |
| | | |
− | [Desktop Entry]
| + | curl -fsSL https://get.docker.com -o get-docker.sh |
− | Encoding=UTF-8
| + | sudo sh get-docker.sh |
− | Name=rednotebook
| |
− | GenericName=rednotebook
| |
− | Comment[zh_CN]=日志本
| |
− | Comment= journal
| |
− | #Exec=/home/evan/software/rednotebook-2.2/run
| |
− | #Icon=/home/evan/software/rednotebook-2.2/rednotebook.png
| |
− | Exec=/opt/rednotebook/run
| |
− | Icon=/opt/rednotebook/rednotebook.png
| |
− | Terminal=false
| |
− | X-MultipleArgs=false
| |
− | StartupWMClass=Firefox
| |
− | Type=Application
| |
− | Categories=Utility;TextEditor;GTK;
| |
− | MimeType=text/html;text/xml;application/xhtml+xml;application/xml;application/rss+xml;application/rdf+xml;image/gif;image/jpeg;image/png;x-scheme-handler/http;x-scheme-handler/https;x-scheme-handler/ftp;x-scheme-handler/chrome;video/webm;application/x-xpinstall;
| |
| | | |
| + | <output truncated> |
| | | |
− | #sudo mv /usr/bin/rednotebook /usr/bin/rednotebook1.4
| + | sudo usermod -aG docker <your-user> |
− | #sudo ln -s /home/evan/software/rednotebook-1.10.1/rednotebook/rednotebook /usr/bin/rednotebook
| |
− | | |
− | | |
− | 家目录 /home/evan/.rednotebook
| |
− | rsync -avz /home/evan/.rednotebook/ 192.168.0.176:/home/evan/.rednotebook/
| |
− | | |
− | | |
− | | |
− | ModuleNotFoundError: No module named 'distutils.core'
| |
− | | |
− | sudo apt install python3-pip python3-yaml
| |
− | | |
| | | |
| | | |
| + | #一 开始基于debian 以后基于apline docker build |
| + | sudo systemctl enable docker |
| + | sudo systemctl start docker |
| | | |
| </pre> | | </pre> |
| + | https://docs.docker.com/engine/install/debian/#install-using-the-convenience-script |
| | | |
− | [[Rednotebook]]
| |
− |
| |
− | === install bluefish===
| |
− | Bluefish is a powerful editor targeted towards programmers and webdevelopers, with many options to write websites, scripts and programming code.
| |
− |
| |
− | sudo apt install bluefish -y
| |
− |
| |
− |
| |
− | http://pkg.kali.org/pkg/bluefish
| |
− |
| |
− | [http://bluefish.openoffice.nl/index.html 官网]
| |
− |
| |
− | [https://bfwiki.tellefsen.net/index.php/Installing_Bluefish Installing Bluefish]
| |
− |
| |
− | === install Sublime Text 3===
| |
− | <pre>wget -qO - https://download.sublimetext.com/sublimehq-pub.gpg | sudo apt-key add -
| |
− | sudo apt-get install apt-transport-https
| |
− | echo "deb https://download.sublimetext.com/ apt/stable/" | sudo tee /etc/apt/sources.list.d/sublime-text.list
| |
− | sudo apt-get update && sudo apt-get install sublime-text
| |
− | </pre>
| |
− | [https://www.sublimetext.com/docs/3/linux_repositories.html#apt 官方参考]
| |
− |
| |
− | ===IM ===
| |
− | https://signal.org/
| |
− | <pre>
| |
− | #2020
| |
− |
| |
− | sudo mv telegram-desktop telegram-desktopbak
| |
− |
| |
− |
| |
− | sudo cp Telegram /usr/bin/
| |
− | sudo cp Updater /usr/bin/
| |
− |
| |
− | sudo ln -s Telegram telegram-desktop
| |
− |
| |
− |
| |
− |
| |
− | 解压后复制到 /opt/Telegram/Telegram
| |
− | /usr/bin$ sudo ln -s /opt/Telegram/Telegram telegram-desktop #要新的 用下载的吧
| |
− | apt install telegram-desktop
| |
− | </pre>
| |
− | 2.1.5 与fictx冲突 换回2.1.4
| |
− | https://telegram.org/
| |
− | https://pkg.kali.org/pkg/telegram-desktop
| |
| | | |
− | ==== wechat====
| |
− | https://gitee.com/lizhuohuan/docker-wechat
| |
− | ==== QQ====
| |
− | <pre>
| |
− | ps QQ 有些 平铺下退出 ,换个样式就可以了
| |
| | | |
| | | |
− | root@k8s-master:~# bash -x linuxqq_2.0.0-b1-1024_x86_64.sh
| + | #最方便就是直接apt哈哈 是不可以的这办法 |
− | + [[ root != \r\o\o\t ]]
| + | apt-get install docker.io -y |
− | + lines=33
| + | 直接下载包安装 |
− | + tarball_md5=f90cfea5999cf4eaafba0b8f0a2f80f8
| + | 不是 arm64/ 不要搞错了 不然会 On Raspberry Pi, BUILD_EXCLUSIVE directive does not match this kernel/arch |
− | + tail -n+33 linuxqq_2.0.0-b1-1024_x86_64.sh
| |
− | ++ md5sum linuxqq.tar.gz
| |
− | ++ cut '-d ' -f1
| |
− | + md5=f90cfea5999cf4eaafba0b8f0a2f80f8
| |
− | + [[ f90cfea5999cf4eaafba0b8f0a2f80f8 != \f\9\0\c\f\e\a\5\9\9\9\c\f\4\e\a\a\f\b\a\0\b\8\f\0\a\2\f\8\0\f\8 ]]
| |
− | + export -f do_install
| |
− | + tar zxf linuxqq.tar.gz
| |
− | + find linuxqq/ -type f -exec bash -c 'do_install "{}"' ';'
| |
− | installing /usr/share/applications/qq.desktop
| |
− | installing /usr/share/tencent-qq/crashpad_handler
| |
− | installing /usr/share/tencent-qq/qq
| |
− | installing /usr/share/tencent-qq/res.db
| |
− | installing /usr/share/tencent-qq/qq.png
| |
− | installing /usr/share/tencent-qq/qq.bmp
| |
− | + rm -rf linuxqq linuxqq.tar.gz
| |
− | + exit 0
| |
| | | |
| + | err |
| + | docker.socket: Failed with result 'service-start-limit-hit' |
| </pre> | | </pre> |
| | | |
− | ===浏览器 ===
| + | https://download.docker.com/linux/debian/dists/stretch/pool/stable/armhf/ |
− | ====chrome ====
| |
− | 方法一:在官网下载对应版本的deb后执行
| |
− | google-chrome-stable #平时升级
| |
− |
| |
− | [http://wiki.linuxchina.net/index.php?title=Ubuntu%E5%88%A9%E7%94%A8shadowsocks%E5%92%8Cpolipo%E7%BB%88%E7%AB%AF%E7%BF%BB%E5%A2%99#shadowsocks.E5.92.8Cpolipo 全局翻墙安装插件]
| |
− | | |
− | | |
− | Google Chrome有众多的出色的插件,说几个常用的
| |
− | suspender:内存不够用,可以装个suspender插件,把其他暂时不看的tab中断掉
| |
− | AdBlock:最受欢迎的Chrome扩展,拥有超过4000万用户!屏蔽整个互联网上的广告
| |
− | The QR Code Extension:允许当前页面生成QR码,并使用网络摄像头扫描QR码。
| |
− | Window Resizer:调节屏幕的分辨率,诸多时候用户开发
| |
− | Vimium:vim的分身
| |
− | Proxy SwitchyOmega:轻松快捷地管理和切换多个代理设置
| |
− | Wechat:微信
| |
− | 马克飞象:使用印象笔记扩展程序一键保存精彩网页内容到印象笔记帐户
| |
− | 惠惠购物助手:【网易出品】在您网购浏览商品的同时,自动对比其他优质电商同款商品价格,并提供商品价格历史,帮您轻松抄底,聪明网购不吃亏
| |
− | JSON-handle:顾名思义就是处理JSON数据的工具
| |
− | | |
− | [https://www.yuzhi100.com/article/debian-9-anzhuang-chrome 使用 Apt 软件源安装谷歌 Chrome ]
| |
− | [[ 通过shadowsocks翻墙 ]]
| |
− | | |
− | ====[http://wiki.linuxchina.net/index.php?title=Firefox%E5%AE%89%E8%A3%85%E5%92%8C%E6%B1%89%E5%8C%96 firefox]====
| |
− | sudo apt install firefox-esr-l10n-zh-cn #如果用自带的esr版本
| |
− | 常用插件 Auto Tab Discard, Notifier for Gmail , Tab Suspender
| |
− | [[firefox安装和汉化]]
| |
− | | |
− | [https://www.mozilla.org/zh-CN/firefox/central/ firefox新手上路]
| |
| | | |
− | ====chromium====
| + | https://mirrors.aliyun.com/docker-ce/linux/raspbian/dists/ |
− | apt install chromium chromium-l10n
| |
− | https://wiki.debian.org/Chromium | |
| | | |
− | ====falkon====
| |
− | sudo apt-get install falkon
| |
− | 又一个轻量的web 浏览器 以前的 Qupzilla apt 会提示你的
| |
− | 2017年8月10日,QupZilla开发者David Rosca在博客宣布QupZilla成为KDE项目。[5]Qupzilla 2.2发布之后项目将更名为“Falkon”。[6]KDE Falkon 3.0于2018年2月27日发布。
| |
− | qupzilla conitnues development as falkon browser
| |
| | | |
− | ====[[tor]]====
| |
| | | |
− | ====gnome-web==== | + | == 10== |
− | apt install epiphany-browser
| |
− | ====midori====
| |
− | 这个暂时安装上不好用 以前可以 直接 apt
| |
− | | |
− | ====palemoon====
| |
| <pre> | | <pre> |
− | 对于 Debian 10,请运行以下命令:
| |
− | Keep in mind that the owner of the key may distribute updates, packages and repositories that your system will trust (more information).
| |
| | | |
− | echo 'deb http://download.opensuse.org/repositories/home:/stevenpusser/Debian_10/ /' | sudo tee /etc/apt/sources.list.d/home:stevenpusser.list
| + | 要等正式版本 |
− | curl -fsSL https://download.opensuse.org/repositories/home:stevenpusser/Debian_10/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/home:stevenpusser.gpg > /dev/null
| |
− | sudo apt update
| |
− | sudo apt install palemoon
| |
− | </pre>
| |
− | | |
− | https://linux.palemoon.org/help/installation/
| |
− | | |
− | ===download tools===
| |
− | sudo apt install uget -y
| |
− | | |
− | axel 还是最爽的 下载rapian就知了
| |
− | | |
− | ===绘图工具dia ===
| |
− | 绘图工具dia(取代visio)
| |
− | sudo apt install dia -y
| |
− | | |
− | ===电子书calibre ===
| |
− | apt install calibre
| |
| | | |
− | ===有道词典 ===
| + | curl -fsSL https://get.docker.com -o get-docker.sh |
| + | sudo bash get-docker.sh |
| | | |
− | http://cidian.youdao.com/index-linux.html
| |
− | #在官网下载对应版本的deb后执行
| |
− | sudo dpkg -i *.deb && sudo apt-get install -fy
| |
| | | |
− | ===x11vnc===
| |
| | | |
− | x11vnc是一种 位图显示的 视窗系统 。它是在 Unix 和 类Unix 操作系统 ,以及 OpenVMS 上建立图形用户界面的标准工具包和协议。x11vnc服务端可以实现Windows远程Linux桌面系统。
| + | root@mypi3b:~/tmp# journalctl -xe |
− | sudo apt-get install x11vnc
| + | Jul 11 11:46:43 mypi3b systemd[1]: docker.service: Start request repeated too quickly. |
| + | Jul 11 11:46:43 mypi3b systemd[1]: docker.service: Failed with result 'exit-code'. |
| | | |
− | ===python===
| |
− | sudo apt-get install ipython3
| |
| | | |
| | | |
− | [https://www.cnblogs.com/xuanhun/p/5481907.html kali linux Python开发环境初始化]
| |
− | ====python IDE ====
| |
− | sudo apt-get install spyder3
| |
| | | |
− | https://docs.spyder-ide.org/installation.html#
| |
| | | |
− | ===ops tools===
| |
− | sudo apt install lrzsz #sz命令发送文件到本地: # sz filename
| |
− | ===develop tools ===
| |
− | apt install gdb
| |
| | | |
− | ===catfish===
| |
− | sudo apt-get install catfish #catfish简称文件搜索神器
| |
| | | |
− | ===django===
| |
− | <pre>
| |
− | pip install Django==1.8.18
| |
| | | |
− | #on ~/.bashrc
| |
− | alias django-admin='/home/evan/.local/lib/python2.7/site-packages/django/bin/django-admin.py'
| |
| </pre> | | </pre> |
| + | https://docs.docker.com/install/linux/docker-ce/debian/#install-using-the-convenience-script |
| | | |
− | ===electronic-wechat===
| |
| | | |
− | electronic-wechat是一个基于nodeJS开发的Linux系统微信。
| + | https://segmentfault.com/a/1190000017109351 |
− | <pre>
| |
− | git clone https://github.com/geeeeeeeeek/electronic-wechat.git
| |
− | cd electronic-wechat
| |
− | npm install && npm start #bash: npm: 未找到命令
| |
| | | |
− | bash: npm: 未找到命令
| + | [https://zhuanlan.zhihu.com/p/29225234 使用 Docker 玩转树莓派] |
− | curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
| |
− | sudo apt-get install -y nodejs
| |
− | </pre>
| |
| | | |
− | ===截图===
| + | [http://gdzrch.win/post/Get-Started-with-Docker-on-Raspberry-Pi.html 在树莓派上安装docker环境] |
| | | |
− | ==== flameshot ====
| + | [https://post.smzdm.com/p/591985/ 树莓派+Docker—轻松打造自己的智能家居控制中心] |
− | sudo apt install flameshot
| |
− | https://flameshot.js.org/#/getting-start | |
| | | |
− | [https://zhuanlan.zhihu.com/p/48250522 Flameshot:一个简洁但功能丰富的截图工具] | + | [https://juejin.im/post/5af867c3518825673e35b9bd 在树莓派上学习 Docker —— Part 1] |
− | ==== Shutter ====
| |
− | gnome-screenshot
| |
− | apt install shutter
| |
− | sudo apt install deepin-screenshot -y
| |
| | | |
| + | [https://yeasy.gitbooks.io/docker_practice/install/raspberry-pi.html 树莓派安装 Docker CE] |
| | | |
− | ====ShareX(win)====
| + | [https://www.jianshu.com/p/e4f4b42aa167 ubuntu主机上docker服务不能启动] |
| | | |
− | ====deepin scrot 作废==== | + | =network wifi= |
| + | 搞半天 原来是ssh 没有启动呀 |
| + | 其实就是用 raspi-config --Network Options--Wi-fi |
| <pre> | | <pre> |
− | sudo apt install deepin-screenshot -y
| + | #cat /etc/wpa_supplicant/wpa_supplicant.conf #is me |
− | | + | ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev |
| + | update_config=1 |
| + | country=CN |
| | | |
− | wget -c http://packages.linuxdeepin.com/deepin/pool/main/d/deepin-scrot/deepin-scrot_2.0-0deepin_all.deb
| + | network={ |
− | sudo dpkg -i deepin-scrot_2.0-0deepin_all.deb
| + | ssid="evan" |
− | sudo apt-get install -f
| + | psk="evan886" |
− | #使用 | + | key_mgmt=WPA2-PSK # 注意 这个选项在我的 pi3+上不行 |
− | deepin-scrot
| + | } |
| | | |
− | 图标
| + | #可以多个wifi 但是我的3+不行呢 试过了 openwrt 不支持5G |
− | https://github.com/lovesnow/pystorm
| + | network={ |
− | 在这 里选择另存为 default/start_cursor.png
| + | ssid="evan5g" |
| + | psk="evan886" |
| + | key_mgmt=WPA2-PSK |
| + | } |
| | | |
| | | |
− | screenshot
| + | 工具化 |
| + | @mypi3b:~# iwlist wlan0 scan | grep evan |
| + | ESSID:"evan2g" |
| | | |
− | vi /usr/share/applications/scrot.desktop
| + | root@mypi3b:~# wpa_passphrase evan2g evan886 |
− | [Desktop Entry]
| + | network={ |
− | Name=scrot
| + | ssid="evan2g" |
− | Name[zh_CN]=抓图
| + | #psk="evan886" |
− | Comment=Save images of your desktop or individual windows
| + | psk=047ce7024516ab9f5dc7845d81bd6803f8797f5e4e5ea9605ee761a0a000834e |
− | Comment[zh_CN]=保存您桌面还是单个窗口的图像
| + | } |
− | Exec=/usr/bin/deepin-scrot
| |
− | Terminal=false
| |
− | Type=Application
| |
− | Icon=/home/evan/screenshot/start_cursor.png
| |
− | StartupNotify=true
| |
− | Categories=GTK;Utility;
| |
− | Keywords=MATE;screenshot;snapshot;desktop;window;image;
| |
− | OnlyShowIn=MATE;
| |
− | X-MATE-Bugzilla-Bugzilla=MATE
| |
− | X-MATE-Bugzilla-Product=mate-utils
| |
− | X-MATE-Bugzilla-Component=screenshot
| |
− | X-MATE-Bugzilla-OtherBinaries=mate-panel-screenshot
| |
| | | |
− | https://wiki.debian.org/ScreenShots
| + | 复制上面得到的Wi-Fi配置信息去更改Wi-Fi配置: |
| | | |
− | /usr/share/applications# find ./ -name "*scree*"
| |
| </pre> | | </pre> |
− | [https://www.deepin.org/2012/03/02/deepin-scrot-2-0-video-and-install-in-ubuntu/ 深度截图工具(DEEPIN-SCROT]
| |
− |
| |
− | ===XMind===
| |
− | XMind是一款实用的思维导图软件,简单易用、美观、功能强大,拥有高效的可视化思维模式,具备可扩展、跨平台。但是对于稳定性和性能还是欠佳,在ubuntu上使用占用很大的CPU资源。
| |
| | | |
− | #在官网下载对应版本的deb后执行
| |
− | sudo dpkg -i *.deb && sudo apt-get install -fy
| |
− |
| |
− | ===远程桌面软件===
| |
− | ====Remmina====
| |
| <pre> | | <pre> |
− | Remmina是一个用远程桌面软件,提供了RDP、VNC、XDMCP、SSH等远程连接协议的支持。 家里有时连不上是原来的网线接口不太好,重插一下就好了
| + | 则在根目录在放置一个名为 wpa_supplicant.conf 的文件,文件内容如下: |
− | sudo apt-get install remmina
| |
| | | |
− | usage
| + | country=CN |
− | | + | ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev |
− | 高级-- 画质 -- 最好
| + | update_config=1 |
− | | |
− | 基本--色深--真色32位
| |
− | | |
− | </pre>
| |
− | | |
− | ====rdesktop====
| |
− | 有时,有个备份的软件很重要 上次Remmina老是自动全屏,每次连接win后老是要断开 烦死了,于是找了一下 发现这货 记录一下
| |
− | 我的常用使用命令
| |
− | rdesktop -g 1280x960 192.168.30.54
| |
− | | |
− | [https://magiclen.org/rdesktop/ 在Linux上使用rdesktop]
| |
− | | |
− | [https://wiki.archlinux.org/index.php/rdesktop arch rdesktop]
| |
− | | |
− | ====freerdp====
| |
− | freerdp.com
| |
− | apt install freerdp-x11 freerdp2-x11
| |
− | http://manpages.ubuntu.com/manpages/xenial/man1/xfreerdp.1.html
| |
− | | |
− | https://www.jianshu.com/p/f6fcf5b56fe3
| |
− | | |
− | ===数据库连接 ===
| |
− | ====[[Dbeaver安装]]==== | |
− | | |
− | | |
− | ===思维导图===
| |
− | [[freeplane]]
| |
− | ===IDE===
| |
− | ====eclipse====
| |
− | | |
− | https://www.eclipse.org/downloads/eclipse-packages/
| |
− | | |
− | [https://www.linuxidc.com/Linux/2018-12/155943.htm Ubuntu 18.04下JDK与Eclipse安装配置]
| |
− | <pre>
| |
− | | |
− | | |
− | | |
− | cat /usr/share/applications/eclipse.desktop
| |
− | [Desktop Entry]
| |
− | Name=eclipse
| |
− | Name[zh_CN]=eclipse IDE
| |
− | GenericName=Integrated Development Environment
| |
− | GenericName[zh_CN]=集成开发环境
| |
− | Comment=Develop software in an integrated development environment
| |
− | Comment[zh_CN]=在集成开发环境中开发软件
| |
− | Encoding=UTF-8
| |
− | Exec=/home/evan/apps/eclipse/eclipse
| |
− | Icon=/home/evan/apps/eclipse/icon.xpm
| |
− | Terminal=false
| |
− | X-MultipleArgs=false
| |
− | StartupWMClass=Firefox
| |
− | Type=Application
| |
− | Categories=GNOME;GTK;Development;IDE;
| |
− | StartupNotify=true
| |
− | </pre>
| |
− | | |
− | ===Meld===
| |
− | Meld是针对开发者的视觉差异和合并工具。MELD帮助您比较文件、目录和版本控制的项目。它提供了两个和三个比较的文件和目录,并支持许多流行的版本控制系统。既可以查看差异有可以同步!
| |
− | sudo apt-get install meld
| |
− | | |
− | ===spyder ===
| |
− | | |
− | Python的开源IDE
| |
− | 可在MIT许可下免费使用
| |
− | Spyder python的一些基本特性是多语言编辑器,交互式控制台,文档查看器,变量浏览器,在文件中查找,文件浏览器等
| |
− | 虽然Spyder是一个独立的IDE,支持包括Windows,Linux,MacOS,MacOS X等多个平台,但它也可以作为一个PyQt扩展库嵌入到PyQt应用程序
| |
− | sudo apt-get install spyder
| |
− | https://pythonhosted.org/spyder/index.html
| |
− | | |
− | 链接:https://github.com/spyder-ide/spyder
| |
| | | |
− | https://pythonhosted.org/spyder/installation.html
| + | network={ |
| + | ssid="WiFi-A" |
| + | psk="12345678" |
| + | key_mgmt=WPA-PSK |
| + | priority=1 |
| + | } |
| | | |
− | 问题就是在awesome环境中fcitx 不能打中文
| + | network={ |
− | | + | ssid="WiFi-B" |
− | === albert=== | + | psk="12345678" |
− | wget -c http://repo.adminlounge.org/pool/dists/jessie/main/a/albert/albert_0.12_amd64.deb
| + | key_mgmt=WPA-PSK |
− | sudo dpkg -i albert_0.12_amd64.deb && sudo apt-get install -fy
| + | priority=2 |
| + | scan_ssid=1 |
| + | } |
| + | 其中, |
| | | |
− | https://albertlauncher.github.io/docs/installing/
| + | ssid:网络的ssid,即Wi-Fi名称 |
− | 官方安装命令好像不成功呢 所以 我直接拿出deb包了
| + | psk:Wi-Fi密码 |
− |
| + | priority:Wi-Fi优先级,数字越大优先级越高(不可为负) |
− |
| + | scan_ssid:连接隐藏WiFi时需要指定该值为1 |
− | ===install eric6===
| + | 注, |
− | <pre>
| |
− | eric6 支持 py2 and py3
| |
− | sudo apt install eric -y
| |
| | | |
− | 安裝插件
| + | 如果 Wi-Fi 没有密码,网络配置部分为: |
− | 插件--> 插件儲存庫 --> 然後都是下載 安装 下一步什么 的就行了
| |
| | | |
− | 问题就是导致fcitx 不能打中文
| + | network={ |
| + | ssid="Wi-Fi 名称" |
| + | key_mgmt=NONE |
| + | } |
| + | 如果 Wi-Fi 使用 WEP 加密,网络配置部分为: |
| | | |
| + | network={ |
| + | ssid="Wi-Fi 名称" |
| + | key_mgmt=NONE |
| + | wep_key0="Wi-Fi 密码" |
| + | } |
| + | 如果 Wi-Fi 使用 WPA/WPA2 加密,网络配置部分为: |
| | | |
− | Debugging with the Eric IDE
| + | network={ |
− | I would sum up how to debug with the Eric IDE too:
| + | ssid="Wi-Fi 名称" |
− | | + | key_mgmt=WPA-PSK |
− | F5 (start debugging; untick “Don’t stop at first line” or set a breakpoint)
| + | psk="Wi-Fi 密码" |
− | F10 (stop)
| + | } |
− | F7 (next, step in subroutines)
| |
− | F8 (next, step over subroutines)
| |
− | F9 (return, step out of subroutine)
| |
− | F6 (continue, go, run)
| |
− | Shift+F6 (continue till cursor)
| |
− | conditional breakpoints are supported (set a breakpoint, right click on it, edit)
| |
− | I find Eric’s debugger is much faster than Winpdb.0
| |
− | | |
− | | |
− | trouble shooting
| |
− | | |
− | 下列软件包有未满足的依赖关系:
| |
− | libkf5coreaddons5 : 破坏: libkf5globalaccel-bin (< 5.37) 但是 5.28.0-1 正要被安装
| |
− | libkf5crash5 : 破坏: libkf5globalaccel-bin (< 5.37) 但是 5.28.0-1 正要被安装
| |
− | E: 错误,pkgProblemResolver::Resolve 发生故障,这可能是有软件包被要求保持现状的缘故。
| |
− | | |
− | | |
− | 如果用新立得 就是提示
| |
− | 无法应用变更! 请先修复损毁的软件包
| |
− | | |
− | 结果这样就好了
| |
− | sudo apt-get install -f
| |
− | sudo dpkg --configure -a
| |
− | | |
− | sudo apt-get dist-upgrade
| |
− | | |
− | | |
− | | |
− | #这个小心点
| |
− | sudo apt-get autoremove
| |
| </pre> | | </pre> |
| | | |
− | http://eric-ide.python-projects.org/
| + | [https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md SETTING WIFI UP VIA THE COMMAND LINE] |
− | | |
− | http://pydev.sourceforge.net/
| |
| | | |
− | [http://www.freehackers.org/IDE_for_python_and_django_development_on_linux IDE for python and django development on linux] | + | [https://www.jianshu.com/p/e22331d62a16 树莓派连接wifi配置] |
| | | |
− | [http://blog.mattwoodward.com/2012/08/manually-installing-django-plugin-for.html Manually Installing the Django Plugin for Eric] | + | [https://blog.csdn.net/huayucong/article/details/51376279 树莓派3代-命令行配置wifi无线连接] |
| | | |
− | ===Figlet===
| + | [http://shumeipai.nxez.com/2017/09/13/raspberry-pi-network-configuration-before-boot.html 无屏幕和键盘配置树莓派WiFi和SSH] |
− | 一句话:Figlet是一个将字符串在终端生成一个logo的终端工具。
| |
− | sudo apt-get install figlet
| |
− | figlet mylove
| |
− | ===bleachbit ===
| |
− | sudo apt install bleachbit
| |
− | sudo bleachbit #有中文界面
| |
− | [https://www.howtoing.com/ccleaner-alternatives-for-ubuntu 用于Ubuntu的6款最佳CCleaner替代品] | |
− | ===chmsee ===
| |
| | | |
− | chmsee
| + | [http://shumeipai.nxez.com/2018/03/13/raspberry-pi-double-network-cards-for-wireless-hotspot.html 树莓派加无线网卡配置WIFI热点的方法] |
| | | |
− | ===打印机===
| + | https://blog.csdn.net/Meteor_s/article/details/80875784 |
− | ====惠普(HP_LaserJet_Professional_M1216nfh_MFP)HP打印机驱动安装====
| |
− | ===== apt我使用的办法 =====
| |
− | <pre>
| |
− | 1、打开深度终端,输入:sudo apt-get update && sudo apt-get install hplip hplip-gui hplip-plugin
| |
− | libcups2 libcups2-dev cups-bsd cups-client libcupsimage2 libcupsimage2-dev libdbus-1-dev
| |
− | </pre>
| |
− | 2、接着终端输入:hp-setup, 按照提示一路下一步 https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/hp_setup
| |
| | | |
| + | [https://www.jianshu.com/p/22dee87a45cf 树莓派基础设置-连接WIFI] |
| | | |
− | https://wiki.deepin.org/index.php?title=%E6%89%93%E5%8D%B0%E6%9C%BA
| + | =树莓派LED指示灯状态= |
| | | |
− | ===== 官方下载=====
| + | 树莓派上有红、绿两个指示灯。 |
− | https://developers.hp.com/hp-linux-imaging-and-printing/gethplip
| |
| | | |
− | https://developers.hp.com/hp-linux-imaging-and-printing/install
| + | 红灯:正常是常亮。此为电源相关的指示灯,因此此灯非正常情况下则为电源问题(包括但不限于,电流太小。比如:USB口挂在了大功率的设备,如移动硬盘) |
| | | |
| + | 绿灯:闪烁为正常。闪烁说明是在正常读取内存卡内容。 |
| | | |
− | https://developers.hp.com/hp-linux-imaging-and-printing/install/install/index | + | [https://shumeipai.nxez.com/2014/09/30/raspberry-pi-led-status-detail.html 树莓派LED指示灯状态的解释] |
| + | =国内源= |
| + | <pre> deb http://mirrors.ustc.edu.cn/raspbian/raspbian/ stretch main contrib non-free rpi |
| | | |
− | ===== 故障处理=====
| + | #更新debian 10 2021 |
− | Searching... (bus=net, timeout=5, ttl=4, search=(None) desc=0, method=slp)
| + | deb https://mirrors.scau.edu.cn/raspbian/raspbian/ buster main non-free contrib rpi |
− | error: No PPD found for model laserjet_professional_m1216nfh_mfp using old algorithm.
| + | deb-src https://mirrors.scau.edu.cn/raspbian/raspbian/ buster main non-free contrib rpi |
− | error: No appropriate print PPD file found for model hp_laserjet_professional_m1216nfh_mfp
| |
| | | |
− | HP_LaserJet_Professional_M1216nfh_MFP
| |
| | | |
− | Would you like to specify the path to the correct PPD file to use (y=yes, n=no*, q=quit) ? y
| + | deb http://mirrors.ustc.edu.cn/raspbian/raspbian/ buster main contrib non-free rpi |
− | | + | </pre> |
− | 解决办法 启动cups
| + | https://mirrors.tuna.tsinghua.edu.cn/help/raspbian/ |
− | | |
− | sudo /etc/init.d/cups start
| |
− | | |
− | ===虚拟机软件===
| |
− | http://pkg.kali.org/pkg/virtualbox | |
− | <pre>
| |
− | myos is kali 2020.2
| |
− | | |
− | | |
− | sudo apt --fix-broken install
| |
− | 416 sudo apt install linux-headers-5.4.0-kali4-amd64
| |
− | sudo apt install libsdl-ttf2.0-0
| |
− |
| |
− |
| |
− | 去掉vbox官方的源
| |
− | 然后 sudo apt install virtualbox 就是最新的6.1的 原来自己的源里有哦
| |
− | | |
− | 用二进制包有错 和官方源有问题的 不用理了
| |
− | | |
− | | |
− | | |
− | #国内mirrors
| |
− | https://mirrors.tuna.tsinghua.edu.cn/virtualbox/
| |
− | | |
− | | |
− | https://mirrors.tuna.tsinghua.edu.cn/virtualbox/6.1.4/virtualbox-6.1_6.1.4-136177~Debian~buster_amd64.deb
| |
− | | |
− | | |
− | sudo apt install virtualbox
| |
− | | |
− | https://download.virtualbox.org/virtualbox/6.0.10/virtualbox-6.0_6.0.10-132072~Ubuntu~bionic_amd64.deb
| |
− | | |
− | | |
− | myos is kali 2017.3
| |
− | Debian 9 ("Stretch") i386 | AMD64
| |
− | wget -c http://download.virtualbox.org/virtualbox/5.2.2/virtualbox-5.2_5.2.2-119230~Debian~stretch_amd64.deb
| |
− | | |
− | apt install linux-headers-amd64 linux-headers-4.13.0-kali1-amd64
| |
− | sudo /sbin/vboxconfig
| |
− | | |
− | | |
− | | |
− | if ubuntu18.04
| |
− | 去清华大学 mirros 下载 6.1 有问题就 sudo apt --fix-broken install
| |
− | | |
− | </pre> | |
− | | |
− | http://pkg.kali.org/pkg/virtualbox
| |
− | | |
− | [https://mirrors.tuna.tsinghua.edu.cn/help/virtualbox/ VirtualBox 镜像使用帮助]
| |
− | | |
− | ===keepass2===
| |
− | sudo apt install keepass2
| |
− | ===翻墙===
| |
− | [[Chrome通过shadowsocks翻墙]]
| |
− | | |
− | [[Ubuntu利用shadowsocks和polipo终端翻墙]]
| |
− | <pre>
| |
− | sslocal -s linuxsa.org -p 443 -k "lai22" -l 7070 -t 600 -m aes-256-cfb #on new kali 加 /etc/rc.local
| |
− | | |
− | #!/bin/bash
| |
− | source /etc/profile #一定要加 不然可能sslocal都说找不到
| |
− | ps -ef | grep sslocal | grep -v grep
| |
− | if [ $? -ne 0 ]
| |
− | then
| |
− | /usr/bin/python /usr/local/bin/sslocal -s linuxsa.org -p 443 -k "lai2240" -l 7070 -t 600 -m aes-256-cfb #on new kali
| |
− | else
| |
− | #echo "has run "
| |
− | :
| |
− | fi
| |
− | | |
− | | |
− | | |
− | | |
− | | |
− | | |
− | | |
− | | |
− | #!/bin/bash
| |
− | # */1 * * * * /home/evan/tunnel & #加定时任务不好 还不如用加配置的高级些呢
| |
− | #CPID=$$ #$$ 是脚本运行的当前进程ID号
| |
− | #RUN="`ps -ef | grep "$0" | grep -v "grep" | grep -v "$CPID" | wc -l`" #$0 是脚本本身的名字
| |
− | RUN="`ps -ef | grep -v "grep" | grep 7070 | wc -l`"
| |
− | [ "$RUN" -gt 0 ] && exit
| |
− | #[ "$RUN" -gt 1 ] && exit
| |
− | #sleep 1
| |
− | | |
− | # freebsd
| |
− | | |
− | | |
− | | |
− | | |
− | | |
− | | |
− | #4 linux
| |
− | # sudo killall sshd
| |
− | | |
− | sleep 3
| |
− | #[ "$RUN" -gq 0 ] && exit
| |
− | #[ "$RUN" -gt 1 ] && exit
| |
− | </pre>
| |
− | | |
− | ===lua===
| |
− | <pre>
| |
− | sudo apt install lua5.1
| |
− | | |
− | evan@kalipc:~/test$ lua
| |
− | Lua 5.1.5 Copyright (C) 1994-2012 Lua.org, PUC-Rio
| |
− | | |
− | </pre>
| |
− | === DM===
| |
− | ==== GDM====
| |
− | gdm3
| |
− | ==== LightDM====
| |
− | 为什么不能列出已有用户呢 我改了 居然不能login
| |
− | | |
− | ====SDDM====
| |
− | apt install sddm
| |
− | === redis-cli===
| |
− | sudo apt install redis-tools
| |
− | | |
− | ===vokoscreen录屏===
| |
− | sudo apt-get install vokoscreen
| |
− | | |
− | ===Kazam录屏===
| |
− | | |
− | apt install kazam #昨天好像是安装不成功呀
| |
− | http://pkg.kali.org/pkg/kazam
| |
− | | |
− | https://linsir.org/post/How_to_install_Kazam_on_kali_linux
| |
− | | |
− | [https://blog.csdn.net/luoxulinger/article/details/82261542 好用轻巧的录屏软件——Kazam]
| |
− | | |
− | | |
− | | |
− | [http://www.mintos.org/skill/vokoscreen-capture.html Vokoscreen:优秀的屏幕录制软件]
| |
− | | |
− | | |
− | | |
− | [https://www.tecmint.com/best-linux-screen-recorders-for-desktop-screen-recording/ 8 Best Screen Recorders for Desktop Screen Recording in Linux]
| |
− | | |
− | https://www.tecmint.com/best-linux-screen-recorders-for-desktop-screen-recording/
| |
− | | |
− | https://itsfoss.com/best-linux-screen-recorders/
| |
− | | |
− | ===vpn ===
| |
− | <pre>
| |
− | apt-get install network-manager-openvpn-gnome
| |
− | apt-get install network-manager-pptp
| |
− | apt-get install network-manager-pptp-gnome
| |
− | apt-get install network-manager-strongswan
| |
− | apt-get install network-manager-vpnc
| |
− | apt-get install network-manager-vpnc-gnome
| |
− | /etc/init.d/network-manager restart
| |
− | </pre>
| |
− | [http://xiao106347.blog.163.com/blog/static/21599207820133110048751?suggestedreading ubuntu vpn]
| |
− | | |
− | ===vnc===
| |
− | <pre>
| |
− | sudo apt install vnc4server
| |
− | vncserver
| |
− | | |
− | Use xtigervncviewer -SecurityTypes VncAuth -passwd /root/.vnc/passwd :1 to connect to the VNC server.
| |
− | </pre>
| |
− | <pre>
| |
− | 0x03 安装VNC,远程桌面你的kali
| |
| | | |
− | 还是先用ssh连接到kali,然后
| + | https://mirrors.scau.edu.cn/mirrors-help/raspbian.html |
| | | |
− | ##apt-get install tightvncserver
| + | =添加风扇= |
| + | [https://testerhome.com/topics/8068 树莓派 根据 CPU 温度控制风扇起停] |
| + | [http://www.shumeipaiba.com/yingjian/peijian/9.htmlb 树莓派2B Raspberry Pi风扇安装] |
| | | |
− | 安装完之后,开启vnc连接
| + | https://jingyan.baidu.com/article/64d05a0216835fde55f73b39.html |
| | | |
− | ##tightvncserver
| + | ==控制风扇== |
| + | [https://www.cnblogs.com/WeiG/p/9856194.html 修改树莓派的风扇,使风扇能够随温度变化而启停] |
| | | |
− | 会提示你输入远程时要验证的密码,输入你的密码(系统会提示你需要一定复杂度
| + | [http://yshblog.com/blog/55 树莓派用开关三极管控制散热风扇] |
− | </pre>
| |
− | 参考 http://www.52pi.net/archives/908
| |
| | | |
| + | [https://wusiyu.me/%E8%AE%A9%E6%A0%91%E8%8E%93%E6%B4%BE%E6%A0%B9%E6%8D%AE%E6%B8%A9%E5%BA%A6%E8%87%AA%E5%8A%A8%E6%8E%A7%E5%88%B6%E6%95%A3%E7%83%AD%E9%A3%8E%E6%89%87%E7%9A%84%E5%90%AF%E5%81%9C/ 让树莓派根据温度自动控制散热风扇的启停] |
| | | |
| | | |
− | [https://blog.csdn.net/mooncarp/article/details/53038952 KALI中如何启用VNC] | + | [https://testerhome.com/topics/8068 树莓派 根据 CPU 温度控制风扇起停] |
| + | [http://shumeipai.nxez.com/2017/07/13/raspberry-pi-to-achieve-temperature-monitoring-and-control-fan-cooling.html 树莓派实现温度监控并控制风扇散热] |
| | | |
− | [https://blog.csdn.net/qq_34661227/article/details/51260966 kali linux 2.0 实现vnc远程桌面连接] | + | [https://blog.csdn.net/qq_15947947/article/details/79637718 修改树莓派的风扇,使风扇能够随温度变化而启停] |
| | | |
− | [http://www.linuxzone.net/sysadmin/554.html Kali Linux开启VNC远程桌面登录] | + | [https://blog.csdn.net/qq_15947947/article/details/79178032 树莓派风扇散热自动控制] |
| | | |
− | ===IRC===
| + | [https://blog.csdn.net/oschina_41734362/article/details/80148833 树莓派3B设置温控风扇(简略版)] |
− | hexchat 可惜输入框有点小 暂时不太会用
| |
| | | |
− | quassel
| + | 另外一个案 |
| | | |
− | [http://blog.linuxchina.net/?p=1082 IRC 在Pidgin 中的设置] | + | [https://blog.csdn.net/u010177891/article/details/80386821 树莓派根据温度自动控制风扇降温] |
− | ===IM===
| |
− | [http://linux265.com/soft/3341.html 微信 for Linux]
| |
| | | |
− | https://github.com/geeeeeeeeek/electronic-wechat/blob/master/README_zh.md#%E5%A6%82%E4%BD%95%E4%BD%BF%E7%94%A8 | + | [https://blog.csdn.net/u012077354/article/details/81240950 树莓派散热风扇自动启停] |
| | | |
− | ===编程===
| + | 升级 |
| | | |
− | ====[[Svn基础]]====
| + | 自启动 |
− | sudo apt install subversion kdesvn
| + | 编辑linux服务脚本并添加到/etc/init.d/,chkconfig add autofun |
| | | |
− | ===思维导图=== | + | ==Pi Dashboard== |
− | FreeMind
| |
− | Freeplane
| |
| | | |
− | [https://linux265.com/news/3925.html 为Linux用户推荐几种免费思维导图软件]
| + | Pi Dashboard是树莓派实验室发布的一个开源的 IoT 设备监控工具,目前主要针对树莓派平台,也尽可能兼容其他类树莓派硬件产品。你只需要在树莓派上安装好 PHP 服务器环境,即可方便的部署一个 Pi 仪表盘,通过炫酷的 WebUI 来监控树莓派的状态! |
| + | 项目主页:http://maker.quwj.com/project/10 |
| + | GitHub地址:https://github.com/spoonysonny/pi-dashboard |
| | | |
− | ===打印机=== | + | =wiki= |
− | 运行 “开始” - ”控制中心 “ - “打印” - "服务器“ 设置共享打印机;然后另外一台 StartOS 机器,在连接打印机中选择”网络打印机“,选择”互联网打印协议(IPP)“,在 URI 输入条中输入共享打印机的地址,格式为 ipp://hostname:631/printers/<打印机的名称>,例如: ipp://192.168.0.1:631/printers/DeskJet-D2300,再根据提示操作即可
| + | [[Docker 安装mediawiki]] |
| + | ==Leanote== |
| + | [[Leanote]] |
| | | |
− | ===linux debian下安装中国农历=== | + | =crontab= |
− | [https://blog.csdn.net/rainysia/article/details/54847445 linux debian下安装中国农历] | + | [https://www.raspberrypi.org/documentation/linux/usage/cron.md SCHEDULING TASKS WITH CRON] |
| | | |
− | ==静态IP== | + | =正确关机= |
− | <pre>
| + | 很多人会这样想:既然接上电源自动开机,那么拔掉电源不就关了机。这种关机相当于非正常关机(比如突然断电), 长期地非正常关机会损坏树莓派的SD卡。 |
− | sudo cat /etc/NetworkManager/system-connections/Wired\ connection\ 1
| + | 正确的关机方法是 |
− | [connection]
| + | 1 先执行下面的命令 |
− | id=Wired connection 1
| + | poweroff |
− | uuid=b2931303-64fc-45e7-88f1-31e160ead5cc
| + | sudo shutdown -h now 或 sudo halt |
− | type=ethernet
| + | 2 当上面的命令执行后,会发现在树莓派的LED状态指示灯中,只有PWR指示灯(电源指示灯)亮着,其他的指示灯都不亮,说明系统已经关闭了。接下来拔掉电源,PWR指示灯随即熄灭。这样才是正确的关机 |
− | permissions=
| |
− | timestamp=1558878910
| |
− | | |
− | [ethernet]
| |
− | mac-address-blacklist=
| |
− | | |
− | [ipv4]
| |
− | address1=192.168.88.4/24,192.168.88.1
| |
− | dns=223.6.6.6;
| |
− | dns-search=
| |
− | method=manual
| |
− | | |
− | [ipv6]
| |
− | addr-gen-mode=eui64
| |
− | dns-search=
| |
− | ip6-privacy=2
| |
− | method=ignore
| |
− | | |
− | </pre>
| |
− | == 清理工作==
| |
− | [https://www.linuxdashen.com/debianubuntu%e6%b8%85%e7%90%86%e7%a1%ac%e7%9b%98%e7%a9%ba%e9%97%b4%e7%9a%848%e4%b8%aa%e6%8a%80%e5%b7%a7 Debian/Ubuntu清理硬盘空间的8个技巧]
| |
− | <pre>apt clean #释放空间 /var/cache/apt/archives/ 里面会有大量下载的软件包
| |
− | | |
− | | |
− | cd /
| |
− | du -sh * --exclude=home #查看除了home目录,哪个目录是最大的
| |
− | | |
− | du -s * | sort -nr|head # 排序
| |
− | | |
− | 思路 在最大的里面删除 或者直接看到哪些没用的,直接删除 例如share/doc
| |
− | | |
− | | |
− | root@latop:/usr# du -s * | sort -nr|head
| |
− | 8290868 lib
| |
− | 5811564 share
| |
− | 1070492 bin
| |
− | 173016 local
| |
− | 158300 src
| |
− | 149140 include
| |
− | 58604 sbin
| |
− | 9188 lib32
| |
− | 76 libexec
| |
− | root@latop:/usr# du -sh lib
| |
− | 8.0G lib
| |
− | root@latop:/usr# du -sh share/
| |
− | 5.6G share/
| |
− | | |
− | | |
− | | |
− | | |
− | sudo apt purge libreoffice?
| |
− | 使用'sudo apt autoremove'来卸载它(它们)。
| |
− | </pre>
| |
− | | |
− | === 瘦身===
| |
− | <pre>
| |
− | apt remove rhythmbox atril pluma uxterm xterm
| |
− | | |
− | apt autoremove gir1.2-pluma-1.0 gir1.2-rb-3.0 libgpod-common libgpod4 libpeas-1.0-python2loader \
| |
− | librhythmbox-core10 libsgutils2-2 pluma-common rhythmbox-data
| |
− | | |
− | | |
− | #/usr/share/doc: 系统说明文件存放目录
| |
− | evan@latop:~$ sudo mv /usr/share/doc/* bakdock/
| |
− | | |
− | </pre>
| |
− | | |
− | == remove different Desktop==
| |
− | sudo apt-get remove kde* plasma* plasma-desktop* plasma-desktop
| |
− | sudo apt-get remove kde-plasma-desktop kde-plasma-netbook kde-standard
| |
− | [https://forums.kali.org/showthread.php?17716-How-to-install-remove-different-Desktop-Window-Manager-in-Kali-Linux-1-x How to install/remove different Desktop]
| |
− | | |
− | ==apt 源目录==
| |
− | http://mirrors.aliyun.com/kali/pool/main/c/catfish/catfish_1.4.4-1_all.deb
| |
− | | |
− | == xfce==
| |
− | [http://wiki.ubuntu.org.cn/Xfce%E9%9D%A2%E6%9D%BF%E6%93%8D%E4%BD%9C%E6%89%8B%E5%86%8C#.E5.90.AF.E5.8A.A8.E5.99.A8 Xfce面板操作手册]
| |
− | [http://wiki.ubuntu.org.cn/Xfce4.2%E6%93%8D%E4%BD%9C%E6%89%8B%E5%86%8C Xfce4.2操作手册]
| |
− | | |
− | [https://wiki.archlinux.org/index.php/Xfce_(%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87) Xfce (arch)]
| |
− | | |
− | [http://wiki.ubuntu.org.cn/Xfce4.2%E7%94%A8%E6%88%B7%E6%8C%87%E5%8D%97 Xfce4.2用户指南]
| |
− | | |
− | [https://wiki.gentoo.org/wiki/Xfce/Guide/zh-cn#Desktop_applications Xfce/指南(gentoo)]
| |
− | | |
− | [https://wiki.xfce.org/start?id=zh-cn/start xfce 百科]
| |
− | | |
− | == move files==
| |
− | <pre>
| |
− | 0.on debianpc
| |
− | | |
− | */5 * * * * rsync -avz xk/ data/xkbak/
| |
− | */40 * * * * rsync -avz ssh/ data/xkbak/ssh/
| |
− | | |
− | | |
− | 1. 先把latop的东西 rsync 到 mydata #
| |
− | cd /mydata
| |
− | rsync -avz --progress 192.168.11.28:/home/evan/* .
| |
− | | |
− | 2.再把pc 有关的cp 到mydata
| |
− | #on pc run command
| |
− | rsync -avz --progress ~/dkm/* 192.168.11.28:/home/evan/dkm/
| |
− | | |
− | #不然是变成 下面的一个子目录了
| |
− | #cp dir1 dir2
| |
− | #cp dir1/ dir2/ #变成子目录
| |
− | rsync -avz --progress .config/awesome/* 192.168.11.28:/home/evan/awesome
| |
− | rsync -avz --progress book/* 192.168.11.28:/home/evan/book/
| |
− | | |
− | | |
− | #这个要先清理一下先
| |
− | #rsync 到 此目录
| |
− | rsync -avz --progress /home/evan/rom/* 192.168.11.28:/home/evan/rom/
| |
− | #同上
| |
− | rsync -avz --progress /home/evan/rom/ 192.168.11.28:/home/evan/rom
| |
− | 不会成为子目录哦
| |
− | rsync -avz --progress /home/evan/rom/ 192.168.11.28:/home/evan/rom/
| |
− | </pre>
| |
− | | |
− | == troubleshooting==
| |
− | === watchdog===
| |
− | <pre>
| |
− | 现在看起来是那个外带的无线网上问题 还是感觉 kali 相比debian有点卡
| |
− | | |
− | Message from syslogd@kali at Oct 13 12:47:30 ...
| |
− | kernel:[ 2897.771142] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [netstat:3680]
| |
− | | |
− | Message from syslogd@kali at Oct 13 12:47:58 ...
| |
− | kernel:[ 2925.770120] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [netstat:3680]</pre>
| |
− | | |
− | Firmware
| |
− | https://wiki.debian.org/Firmware
| |
− | | |
− | [https://ubuntuforums.org/showthread.php?t=2205211 kernel BUG: soft lockup - CPU stuck for 23s!]
| |
− | | |
− | === 小心 更新系统===
| |
− | 2018年 09月 23日 星期日 18:37:21 CST
| |
− | 这个主板 CPU 太新 一开始安装不上,搞了N久,后来 拿回家在家里的老主板上安装成功,然后拿到新主机机器上 一开始好好的 ,可惜我突然又想更新 于是又挂了呀
| |
− | ===乱码 kali light===
| |
− | <pre> apt install ttf-wqy-microhei ttf-wqy-zenhei xfonts-wqy # reboot ok
| |
− | | |
− | 安装kali-linux-full,包含各种工具:
| |
− | $ sudo apt-get install kali-linux-full
| |
− | | |
− | 安装GNOME 3桌面环境:
| |
− | $ sudo apt-get install kali-desktop-gnome
| |
− | | |
− | | |
− | </pre>
| |
− | | |
− | [https://blog.csdn.net/Blog_inG/article/details/78981684 安装kali-light版本后使用中文出现乱码签名无效]
| |
− | | |
− | === realtek===
| |
− | http://mirrors.ustc.edu.cn/debian/pool/non-free/f/firmware-nonfree/firmware-realtek_20161130-3_all.deb
| |
− | | |
− | ===apt lock===
| |
− | <pre>
| |
− | root@kali:~# apt-get install openssh-client
| |
− | E: 无法获得锁 /var/lib/dpkg/lock - open (11: 资源暂时不可用)
| |
− | E: 无法锁定管理目录(/var/lib/dpkg/),是否有其他进程正占用它?
| |
− | root@kali:~# apt \\^C
| |
− | root@kali:~# apt install openssh-client
| |
− | E: 无法获得锁 /var/lib/dpkg/lock - open (11: 资源暂时不可用)
| |
− | E: 无法锁定管理目录(/var/lib/dpkg/),是否有其他进程正占用它?
| |
− | root@kali:~# apt update
| |
− | 命中:1 http://mirrors.neusoft.edu.cn/kali kali-rolling InRelease
| |
− | 正在读取软件包列表... 完成
| |
− | 正在分析软件包的依赖关系树
| |
− | 正在读取状态信息... 完成
| |
− | | |
− | root@kali:~# ps -ef | grep apt
| |
− | _apt 1400 667 0 15:36 ? 00:00:00 /usr/lib/apt/methods/http
| |
− | _apt 1401 667 11 15:36 ? 00:00:13 /usr/lib/apt/methods/http
| |
− | | |
− | root@kali:~# ps -ef | grep dpkg
| |
− | root 1525 1380 0 15:38 pts/1 00:00:00 grep dpkg
| |
− | root@kali:~# kill -9 1400 1401
| |
− | </pre>
| |
− | === err===
| |
− | dpkg-deb: 错误: <解压缩> subprocess returned error exit status 2
| |
− | dpkg: 处理归档 /var/cache/apt/archives/libwebkit2gtk-4.0-37_2.22.0-2_amd64.deb (--unpack)时出错:
| |
− | 无法为 './usr/lib/x86_64-linux-gnu/libwebkit2gtk-4.0.so.37.33.1' 拷贝解压的文件至 '/usr/lib/x86_64-linux-gnu/libwebkit2gtk-4.0.so.37.33.1.dpkg-new': 未预期的文件结束或流结束
| |
− | 正准备解包 .../libjavascriptcoregtk-4.0-18_2.22.0-2_amd64.deb ...
| |
− | 正在将 libjavascriptcoregtk-4.0-18:amd64 (2.22.0-2) 解包到 (2.20.3-1) 上 ...
| |
− | dpkg-deb (子进程):解压缩归档成员:lzma 错误:压缩数据已损坏
| |
− | dpkg-deb: 错误: <解压缩> subprocess returned error exit status 2
| |
− | dpkg: 处理归档 /var/cache/apt/archives/libjavascriptcoregtk-4.0-18_2.22.0-2_amd64.deb (--unpack)时出错:
| |
− | 无法为 './usr/lib/x86_64-linux-gnu/libjavascriptcoregtk-4.0.so.18.11.1' 拷贝解压的文件至 '/usr/lib/x86_64-linux-gnu/libjavascriptcoregtk-4.0.so.18.11.1.dpkg-new': 未预期的文件结束或流结束
| |
− | 在处理时有错误发生:
| |
− | /var/cache/apt/archives/libwebkit2gtk-4.0-37_2.22.0-2_amd64.deb
| |
− | /var/cache/apt/archives/libjavascriptcoregtk-4.0-18_2.22.0-2_amd64.deb
| |
− | | |
− | E: Sub-process /usr/bin/dpkg returned an error code (1)
| |
− | | |
− | === 华硕开机自动进入bios ===
| |
− | <pre>
| |
− | #在新PC 安装了 kali,记得要删除整个硬盘,我使用了默认的分区,不然grub安装不成功, 加个数据硬盘后居然老是直接到BIOS
| |
− | 1.首先恢复一下bios默认值,避免其他参数变动影响
| |
− | | |
− | 2..Security-->Secure Boot Management按回车进入设置菜单;将Secure Boot 改为Disabled
| |
− | | |
− | 3.选择Boot进入启动设置,将Fast Boot设为disabled ,将Launch CSM设为Enabled;
| |
− | | |
− | 4.F10保存设置。重启进系统不再进bios
| |
− | | |
− | #这个办法 ?
| |
− | 首先进入bios
| |
− | | |
− | Security->Secure Boot Control->Disabled
| |
− | F10保存,继续进入bios
| |
− | | |
− | Boot->Launch CSM->Enabled
| |
− | F10保存,成功进入系统
| |
− | | |
− | 最后发现,如果在磁盘分区时候没选择全放在一起(即第一项推荐新手)而是选择了下面的2项就会导致安装操作系统失败
| |
− | | |
− | 解决方案:我原本空闲出20G给kali,现在改为45G,安装时就不会失败了,详情见kali 安装步骤 安装失败 kali install fail 已解决,究其原因"/ 根目录" 要分10G以上(否则安装失败,x32和x64位的系统在两台电脑上面共尝试安装了10次左右没有成功,后来成功后总结出已知原因两点1,须选图形化安装2,手工分区,而且根目录足够大,此版本解压出来/根目录就7GB以上了
| |
− | | |
− | </pre>
| |
− | http://linuxbsdos.com/2016/11/05/dual-boot-kali-linux-rolling-2016-2-windows-10-on-a-pc-with-uefi-firmware/
| |
− | | |
− | === pc err ===
| |
− | ==== mate err ====
| |
− | <pre>
| |
− | 您希望继续执行吗? [Y/n] y
| |
− | dpkg-deb (子进程):解压缩归档成员:lzma 错误:压缩数据已损坏
| |
− | dpkg-deb: 错误: <解压缩> subprocess returned error exit status 2
| |
− | dpkg-deb (子进程):无法从 /var/cache/apt/archives/libgtk-3-0_3.24.1-2_amd64.deb 中拷贝归档成员到解码管道中:写入失败 (断开的管道)
| |
− | 读取变更记录(changelogs)... 完成
| |
− | (正在读取数据库 ... 系统当前共安装有 436105 个文件和目录。)
| |
− | 正准备解包 .../libgtk-3-0_3.24.1-2_amd64.deb ...
| |
− | 正在将 libgtk-3-0:amd64 (3.24.1-2) 解包到 (3.22.30-2) 上 ...
| |
− | dpkg-deb (子进程):解压缩归档成员:lzma 错误:压缩数据已损坏
| |
− | dpkg-deb: 错误: <解压缩> subprocess returned error exit status 2
| |
− | dpkg: 处理归档 /var/cache/apt/archives/libgtk-3-0_3.24.1-2_amd64.deb (--unpack)时出错:
| |
− | 无法为 './usr/lib/x86_64-linux-gnu/libgtk-3.so.0.2400.1' 拷贝解压的文件至 '/usr/lib/x86_64-linux-gnu/libgtk-3.so.0.2400.1.dpkg-new': 未预期的文件结束或流结束
| |
− | 正准备解包 .../mate-icon-theme_1.20.1-1_all.deb ...
| |
− | 正在解包 mate-icon-theme (1.20.1-1) ...
| |
− | dpkg-deb (子进程):解压缩归档成员:lzma 错误:压缩数据已损坏
| |
− | dpkg-deb: 错误: <解压缩> subprocess returned error exit status 2
| |
− | dpkg: 处理归档 /var/cache/apt/archives/mate-icon-theme_1.20.1-1_all.deb (--unpack)时出错:
| |
− | 无法为 './usr/share/icons/mate/256x256/devices/video-display.png' 拷贝解压的文件至 '/usr/share/icons/mate/256x256/devices/video-display.png.dpkg-new': 未预期的文件结束或流结束
| |
− | 在处理时有错误发生:
| |
− | /var/cache/apt/archives/libgtk-3-0_3.24.1-2_amd64.deb
| |
− | /var/cache/apt/archives/mate-icon-theme_1.20.1-1_all.deb
| |
− | </pre>
| |
| | | |
− | =====办法 1 如何解决这个问题 看能不能这个===== | + | =Dashboard= |
| + | [http://shumeipai.nxez.com/2017/08/31/pi-dashboard-released.html Pi Dashboard:给你的派装一个仪表盘] |
| | | |
− | [http://forum.ubuntu.org.cn/viewtopic.php?f=86&t=485625&p=3197587 使用apt安装软件时,提示dpkg-deb: /lib/x86_64-linux-gnu/liblzma.so.5]
| |
| | | |
− | [https://blog.csdn.net/longma666666/article/details/81701802 dpkg-deb (子进程):解压缩归档成员:lzma 错误:压缩数据已损坏] | + | =lnmp= |
| + | [[Docker lnmp]] |
| + | 这些要 docker 化 除了nginx |
| | | |
− | =====办法2 重装 安装有gnome 就可以 全局ss 并安装chrome plus=====
| + | [https://sb.sb/blog/debian-install-nginx-php-mysql/ Debian 9 使用源安装 LEMP 教程] |
| | | |
− | =ops=
| + | [https://getgrav.org/blog/raspberrypi-nginx-php7-dev Raspberry Pi Dev Setup with Nginx + PHP7] |
− | ==[[中文man手册]]==
| |
| | | |
− | =常用软件列表=
| + | [https://janw.me/2017/installing-php7-2-rapsberry-pi/ Installing PHP7.2 on a Rapsberry Pi] |
− | Lubuntu 20.04
| |
− | Ark – 归档文件管理器
| |
− | Bluedevil – 蓝牙连接管理
| |
− | Discover 软件中心 – 包管理系统
| |
− | FeatherPad – 文本编辑器
| |
− | FireFox – 浏览器
| |
− | K3b – CD/DVD 刻录器
| |
− | Kcalc – 计算器
| |
− | KDE 分区管理器 – 分区管理工具
| |
− | LibreOffice – 办公套件(Qt 界面版本)
| |
− | LXimage-Qt – 图片查看器及截图制作
| |
− | Muon – 包管理器
| |
− | Noblenote – 笔记工具
| |
− | PCManFM-Qt – 文件管理器
| |
− | Qlipper – 剪贴板管理工具
| |
− | qPDFview – PDF 阅读器
| |
− | PulseAudio – 音频控制器
| |
− | Qtransmission – BT 下载工具(Qt 界面版本)
| |
− | Quassel – IRC 客户端
| |
− | ScreenGrab – 截屏制作工具
| |
− | Skanlite – 扫描工具
| |
− | 启动盘创建工具 – USB 启动盘制作工具
| |
− | Trojita – 邮件客户端
| |
− | VLC – 媒体播放器
| |
− | MPV 视频播放器
| |
| | | |
| + | =vnc= |
| + | [https://www.raspberrypi.org/documentation/remote-access/vnc/README.md VNC (VIRTUAL NETWORK COMPUTING)] |
| | | |
− | [https://linux.cn/article-10099-1.html 75 个最常用的 Linux 应用程序]
| + | =区别= |
| + | 对于Arduino来讲,它是一个单片机,在机器里不会运行现有的通用OS,它更多的就是一个通过setup和loop接口进行执行的特定机器,它的内存也非常的小。而Raspbeery Pi则不同,它有一个非常强的CPU,存储也很大,可以运行通用的OS,比如Linux,也有着更为强大的标准输入、输出接口。所以它们有着完全不同的用途,Arduino更多的用于简单的定式操作,而Raspbeer Pi用于在Linux这样的操作系统上运行应用的环境。 |
| | | |
| | | |
− | [https://zhuanlan.zhihu.com/p/36649383 那个程序员的Linux常用软件清单] | + | [https://www.zhihu.com/question/20755144 Arduino 与树莓派 Raspberry Pi 相比各自有什么优缺点] |
| | | |
− | [https://www.v2ex.com/t/575901 大家有什么推荐的日常 Linux 软件] | + | =func= |
| + | [http://shumeipai.nxez.com/2018/06/13/build-baby-monitor-raspberry-pi.html 使用树莓派构建一个婴儿监视器] |
| | | |
− | =备用=
| + | [https://www.rs-online.com/designspark/content-1394 用一个回形针关闭你的树莓派] |
− | [https://i.linuxtoy.org/docs/guide/ch31.html 完美工作站 Archlinux] | |
− | == ==
| |
| | | |
− | =Debian(kali)usb无线网卡= | + | =入门= |
| + | [https://blog.csdn.net/kelsey98/article/details/78949975 Raspberry Pi 3学习系列——基本使用] |
| | | |
| + | [https://blog.csdn.net/meteor_s/article/category/7793987 Raspberry Pi 系列] |
| | | |
− | 公司的PC 无线网卡为RTL8192EE
| + | [https://segmentfault.com/a/1190000002579917 树莓派(raspberryPi)的终极玩法 1: 平台搭建] |
| | | |
− | 安装过程报错
| |
− | regulatory.db
| |
| | | |
− | 如果没有你需要的,请自己在官网找,软件包地址在这:
| + | [https://segmentfault.com/a/1190000002583340 树莓派的终极玩法 2 :motion +摄像头] |
− | https://packages.debian.org/search?searchon=names&keywords=Realtek | |
| | | |
− | 我下载了整个 deb包
| + | =进阶= |
− | https://packages.debian.org/stretch/firmware-realtek | + | [https://segmentfault.com/a/1190000014248533 树莓派迅雷远程下载] |
| | | |
| + | [https://github.com/kuoruan/Xware Xware迅雷] |
| | | |
− | [http://www.kali.org.cn/thread-31104-1-1.html Kali安装时:rtl_nic/rtl8411-1.fw固件缺失 以及无法确定发布代号的解决办法] | + | [http://blog.lxx1.com/2403 使用安卓手机控制树莓派] |
− | ==see aslo==
| |
| | | |
− | https://www.linuxquestions.org/questions/linux-kernel-70/kernel-platform-regulatory-0-direct-firmware-load-for-regulatory-db-failed-with-error-2-a-4175622954/ | + | [https://www.hscbook.com/article/raspberrypi-haproxy/ 树莓派安装 HAProxy 实现高可用高负载SS服务器线路负载均衡] |
| | | |
− | https://github.com/robertfoss/wireless-regdb/blob/master/regulatory.db
| + | == GPIO== |
| + | [http://blog.lxx1.com/2639 树莓派GPIO引脚定义详细图] |
| | | |
| + | [http://blog.lxx1.com/%E6%A0%91%E8%8E%93%E6%B4%BEgpio%E5%BC%95%E8%84%9A%E5%AF%B9%E7%85%A7%E8%A1%A8 树莓派GPIO引脚对照表] |
| | | |
− | TP-LINK 722N 不支持linux ,千万别买, 在kali上面无法识别,今天我买了一个,到货了,试了各种方法都没用,打算退货
| + | [https://segmentfault.com/a/1190000000714185 树莓派-GPIO、CPU、温度、内存] |
| | | |
− | TP-LINK TL-WN726N免驱版 外置天线USB无线网卡
| |
| | | |
− | http://www.aircrack-ng.org/doku.php?id=compatibility_drivers | + | [http://blog.lxx1.com/%E6%A0%91%E8%8E%93%E6%B4%BE-wiringpi-%E7%94%A8%E6%88%B7%E6%89%8B%E5%86%8C 树莓派 wiringPi 用户手册] |
| | | |
− | [http://www.secist.com/archives/3916.html 2017年最适用于WIFI HACK的无线网卡推荐] | + | [http://blog.lxx1.com/1991 树莓派使用wiringPi控制LED灯] |
| | | |
− | [https://blog.csdn.net/chenyiyue/article/details/52516395 Kali 安装无线网卡驱动]
| + | =trouble shooting= |
| | | |
− | =参考资料=
| + | 解决树莓派容量使用不完全问题 |
− | [https://my.oschina.net/u/260165/blog/4683598 ArchLinux 2020 安装总结]
| + | 我是 64G 的内存卡,但是看容器总共只有 7.2G.第一反应是遇到了黑心商家,但是网上搜了下,简单设置重启即可.详见: http://cedar-renjun.github.io/2015/10/11/resize-raspberry-sd-volume/ |
| | | |
− | [http://linux265.com/news/3352.html Linux系统装机必备应用top10]
| + | =参考= |
| | | |
− | [https://zhuanlan.zhihu.com/p/41058223 Linux上有哪些高效的工具软件?]
| + | == 教程== |
| | | |
− | [https://hacpai.com/article/1552717494529 高效 manjaro i3] | + | [http://blog.lxx1.com/topics/hard/raspberry-pi/page/9 树莓派归档] |
| | | |
− | [https://linux265.com/news/3887.html 安装完 Debian 10 后必做的10件事]
| |
| | | |
− | [http://wiki.ubuntu.com.cn/Qref/Apps ubuntu wiki apps] | + | [https://www.jianshu.com/p/89685aa72da4 第1讲:树莓派购买指南【子豪兄的零基础树莓派教程】] |
− | [http://www.jianshu.com/p/ac6e13290698 程序员的Linux常用软件清单]
| |
| | | |
− | [http://blog.linuxchina.net/?p=1674 kali初始化myblog] | + | [https://my.oschina.net/TimeCarving 树莓派3 oschina教程] |
| | | |
− | [https://linux.cn/article-11178-1.html Debian 10(Buster)安装后要做的前 8 件事 ] | + | [http://shumeipai.nxez.com/ 树莓派实验室] |
| | | |
− | [http://blog.linuxchina.net/?p=12 debian初始化 -testing] | + | [https://post.smzdm.com/p/714456/ 树莓派SBC HIFI DSD播放器 篇六:Moode4.1在树莓派3B+搭建HIFI音乐播放器] |
| | | |
− | [https://blog.csdn.net/w0ryitang/article/details/80138867 Kali Linux 配置和优化(安全牛学习笔记)]
| |
| | | |
− | [https://zhuanlan.zhihu.com/c_141709450 kali日常] | + | [http://www.30daydo.com/article/19 树莓派2代 接通用usb摄像头 ] |
− | [http://blog.csdn.net/u012539899/article/details/38350279 无法应用变更! 请先修复损毁的软件包]
| |
| | | |
| + | [https://www.zhihu.com/question/20859055 树莓派是什么以及普通人怎么玩] |
| | | |
− | [http://www.cnblogs.com/leisurely/p/4033557.html kali初始化] | + | [https://www.leiphone.com/news/201511/7DAzK23RzBEJzvra.html?x=207&y=21 树莓派初学者?先做做这十个项目吧] |
| | | |
− | [http://qiuye.iteye.com/blog/461394 Ubuntu 中软件的安装、卸载以及查看的方法总结]
| |
| | | |
− | [https://pythonadventures.wordpress.com/2011/03/15/install-the-eric-python-ide/ Install the Eric Python IDE]
| + | https://www.raspberrypi.org/products/#buy-now-modal |
| | | |
| + | 官方中国商城 上次买的那个态度不好,下次换个 |
| | | |
− | [https://weibo.com/ttarticle/p/show?id=2309404087493942188550&infeed=1 10个最佳 Python 集成开发环境(IDE)]
| + | https://item.taobao.com/item.htm?spm=a1z10.1-c.w4004-17579621303.18.68e52d28OXMtCt&id=558354832128&src=raspberrypi |
| | | |
− | [http://note.qidong.name/2017/07/remmina-rampage/ Remmina的一次暴走]
| + | https://item.taobao.com/item.htm?spm=0.7095261.0.0.2f291debgNGawr&id=565756129429&src=raspberrypi |
| | | |
− | [https://www.cnblogs.com/sqlsec/p/diykali.html 开启你的kali linux DIY之旅]
| + | https://item.taobao.com/item.htm?spm=0.7095261.0.0.29491debwhELXl&id=565703159178&src=raspberrypi |
| | | |
| | | |
− | [https://blog.csdn.net/oZuiJiaoWeiYang/article/details/44804787 Linux下给力截图工具归纳]
| |
| | | |
− | [http://www.linuxdiyf.com/linux/32561.html Ubuntu安装腾讯TIM] | + | [https://segmentfault.com/a/1190000008664157 在树莓派上搭建LNMP环境] |
| | | |
− | [http://linux265.com/news/3546.html Debian Xfce 安装后的常用配置教程] | + | [https://blog.csdn.net/qq_31324613/article/details/78198484 树莓派最新raspbian系统换国内源] |
| | | |
− | [https://www.cnblogs.com/seniusen/p/9295583.html Remmina Ubuntu 和 Windows 之间进行远程访问和文件互传]
| |
| | | |
| + | [https://post.smzdm.com/p/709152/ RaspberryPi 3B+开箱] |
| | | |
− | [https://www.moonsec.com/archives/762 vbox host kali 2020.1版本安装及中文汉化] | + | [https://post.smzdm.com/p/738574/ 树莓派 3B+ 开箱] |
| | | |
− | [https://zhuanlan.zhihu.com/p/37314255 Ubuntu 18.04 LTS 安装、美化] | + | [https://www.cnbeta.com/articles/tech/760839.htm 树莓派迎来PoE网线供电选项 新HAT模块售20美元] |
| | | |
| + | [https://post.smzdm.com/p/656839/ 原创新人#咸鱼淘二手树莓派3装KODI及Genesis Reborn插件手机遥控在线看片] |
| | | |
− | [https://www.cnblogs.com/M4K0/p/11409647.html Kali-Linux-美化与优化 ] | + | [https://post.smzdm.com/p/552274/ 搭建OMV:树莓派PI3的充分利用] |
| | | |
− | [https://www.tecmint.com/hardinfo-check-hardware-information-in-linux/ HardInfo – Check Hardware Information in Linux]
| |
| | | |
− | [[category:linux]] [[category:desktop]] [[category:kali]]
| + | [https://segmentfault.com/a/1190000000503041 镜像站全汇总] |
| + | [[category:树莓派]] [[category:fun]] |