|
|
第1行: |
第1行: |
− | ==站内资源==
| |
− | [[Zabbix 调用API 批量添加主机]]
| |
− | == zabbix server ==
| |
− | ===pre ===
| |
− | 这些是官网官方安装文档,记得一定要看
| |
| | | |
− | https://www.zabbix.com/documentation/3.0/manual/installation/install
| + | = pfSense= |
| | | |
− | https://www.zabbix.org/wiki/InstallOnCentOS_RHEL | + | [https://pfschina.org/wp/?p=825 pfSense上的OpenVPN:启用对远程LAN资源的访问] |
| + | =ros Mikrotik= |
| + | [https://www.zhihu.com/question/21034719 如何评价极路由 HiWiFi] |
| | | |
− | <pre>wget -c https://jaist.dl.sourceforge.net/project/zabbix/ZABBIX%20Latest%20Stable/3.0.8/zabbix-3.0.8.tar.gz
| + | [https://www.jianshu.com/p/e38851f9de2f Mikrotik无线路由器快速设置教程] |
− | wget -c http://tenet.dl.sourceforge.net/project/zabbix/ZABBIX%20Latest%20Stable/2.2.13/zabbix-2.2.13.tar.gz</pre>
| |
| | | |
− | ===#配置php变量===
| + | https://openwrt.org/zh/start |
− | <pre>vi /etc/php.ini
| |
− | date.timezone = Asia/Shanghai
| |
− | post_max_size = 32M
| |
− | max_execution_time = 300
| |
− | max_input_time = 300
| |
− | 注:更改完之后需要重启nginx和php</pre>
| |
| | | |
− | ===#安装zabbix所需的组件 ===
| + | [https://blog.netlab.360.com/7500-mikrotik-routers-are-forwarding-owners-traffic-to-the-attackers-how-is-yours/ 窃听风云: 你的MikroTik路由器正在被监听] |
− | <pre>yum -y install net-snmp-devel curl-devel
| |
− | #yum -y install curl curl-devel net-snmp net-snmp-devel perl-DBI php-gd php-xml php-bcmath
| |
− | groupadd zabbix && useradd -g zabbix zabbix
| |
− | tar xvf zabbix-3.0.8.tar.gz && cd zabbix-3.0.8
| |
− | #tar xvf zabbix-2.2.13.tar.gz && cd zabbix-2.2.13
| |
| | | |
− | #./configure –enable-server –enable-agent –with-mysql –enable-ipv6 –with-net-snmp –with-libcurl –with-libxml2
| + | https://www.zhihu.com/topic/19653984/hot |
| | | |
− | ##或者默认安装路径 make是不用的
| + | [https://zhuanlan.zhihu.com/p/101006349 树莓派软路由 OpenWrt 简介] |
− | ./configure --sysconfdir=/etc/zabbix --enable-server --enable-proxy --enable-agent --with-mysql=/usr/local/mysql/bin/mysql_config --with-net-snmp --with-libcurl --with-libxml2 && make install
| |
− | </pre>
| |
− | ===添加zabbix服务对应的端口(可以省略,但是官方建议有)===
| |
− | <pre>cat >>/etc/services<< EOF
| |
− | zabbix-agent 10050/tcp #Zabbix Agent
| |
− | zabbix-agent 10050/udp #Zabbix Agent
| |
− | zabbix-trapper 10051/tcp #Zabbix Trapper
| |
− | zabbix-trapper 10051/udp #Zabbix Trapper
| |
− | EOF</pre>
| |
| | | |
− | ===配置文件=== | + | =路由器如何当交换机用= |
− | <pre>##好像是这个起效果的呢 –sysconfdir=/etc/zabbix 有这个,不用下面的命令了
| + | 公司的无线非常的卡 ,于是把一个坏的无线路由拿过来当作交换机 ,这样 win debian 都可以用上有钱的 当然 自己带了两段网线 |
− | #vim /usr/local/etc/zabbix_server.conf
| |
− | #cd zabbix-2.0.7
| |
| | | |
− | #mkdir /etc/zabbix | + | # 关掉这个路由的DHCP功能 |
− | #cp conf/*.conf /etc/zabbix | + | #改掉LAN口IP地址 |
| + | #最网线不要接WAN接口 ,一个AP成功配置 |
| | | |
− | mkdir /var/log/zabbix ;chown zabbix:zabbix /var/log/zabbix;
| + | [https://product.pconline.com.cn/itbk/wlbg/hiwifi/1702/8881901.html 路由器如何当交换机用] |
| | | |
| + | [https://www.192ly.com/router-settings/mercury/mw325r-swsz.html 水星(MERCURY)MW325R路由器怎么设置] |
| | | |
− | #zabbix web代码
| + | =双系统之win= |
− | mkdir -p /data/www/zabbix;
| + | 2020年 08月 14日 星期五 15:37:29 CST |
− | cp -r frontends/php/* /data/www/zabbix
| + | 如何删除双系统中的一个系统 |
| | | |
− | 修改zabbix连接的数据库的用户名和密码
| + | 场景 本本有两个 win7 一个在ssd ssd上的win7坏了 ,我重新安装win10 on ssd 但是又不见了 虽然第一启动是ssd |
− | vi /etc/zabbix/zabbix_server.conf
| |
| | | |
− | DBHost=127.0.0.1
| + | 后来 在“运行”中我们输入“msconfig”然后点击“确定”,进入系统引导盘中 系统配置--》引导 把要的设置为默认 ,不要的也可以删除 然后就好了 开机是原来在ssd上的win7有点怪 不理了 |
− | DBName=zabbix
| |
− | DBUser=zabbix
| |
− | DBPassword='123'
| |
− | DBPort=3306 #如果数据库是用sock文件的方式,这里可以是sock文件的路径
| |
| | | |
− | 添加数据库Lib文件位置到/etc/ld.so.conf中,并使其生效
| + | =进入 bios= |
− | echo ‘/usr/local/mysql/lib/mysql/’ >> /etc/ld.so.conf
| + | ==asus== |
| + | 1、按电源键开机或重启,在启动过程中,不停按ESC键; |
| | | |
− | ldconfig
| + | 2、调出Please Select Boot Device,这个是启动项选择界面,可以直接选择启动项,也可以从这边进BIOS,那就是按↓方向键,移动到Enter Setup这个项,然后按Enter键即可进入。 |
| | | |
− | 为zabbix的启动、关闭和重启的脚本文件做链接,方便系统可以找得到
| + | http://www.xitongcheng.com/jiaocheng/xtazjc_article_44070.html |
| | | |
− | 给zabbix服务端程序做软链接 我用默认的config 应该是不用的
| + | =缺少 api-ms-win-crt-runtime-l1-1-0.dll= |
− | cd /usr/local/zabbix/bin/
| + | ==问题出现 == |
− | for i in *;do ln -s /usr/local/zabbix/bin/${i} /usr/bin/${i};done
| |
− | cd /usr/local/zabbix/sbin/
| |
− | for i in *;do ln -s /usr/local/zabbix/sbin/${i} /usr/sbin/${i};done
| |
| | | |
− | 拷贝zabbix服务端和客户端启动脚本到/etc/init.d目录下.
| + | 运维组的其它小伙伴都请假了,于是我就暂时成为IT支持 |
− | cd misc/init.d/
| |
− | cp fedora/core/zabbix_server /etc/init.d/
| |
− | cp fedora/core/zabbix_agentd /etc/init.d/
| |
− | chmod +x /etc/init.d/zabbix_agentd
| |
− | chmod +x /etc/init.d/zabbix_server</pre>
| |
| | | |
− | ===3 Create Zabbix database===
| + | “有个新来的同学电脑 出问题了 ” 前台妹子又出现了 |
− | <pre>SQL scripts are provided for creating database schema and inserting the dataset
| |
− | #https://www.zabbix.com/documentation/3.0/manual/appendix/install/db_scripts
| |
− | #https://www.zabbix.com/documentation/2.2/manual/appendix/install/db_scripts
| |
| | | |
− | mysql>create database zabbix character set utf8 collate utf8_bin;;grant all on zabbix.* to zabbix@localhost identified by '123';flush privileges;
| |
| | | |
− | 将zabbix源码包中的数据导入到新建的zabbix数据库
| + | 一同学安装画板驱动时出现如下 |
− | ##这个和老的版本有点不同 第一个是zabbix的数据库表结构,要先导入。
| + | 错误:缺少 api-ms-win-crt-runtime-l1-1-0.dll |
| | | |
− | . /etc/profile
| |
− | cd ../..
| |
− | mysql -uroot -p'evan' zabbix< database/mysql/schema.sql
| |
− | mysql -uroot -p'evan' zabbix< database/mysql/images.sql
| |
− | mysql -uroot -p'evan' zabbix< database/mysql/data.sql
| |
| | | |
− | vi /etc/init.d/zabbix_server # 的可以不改,修改一下变量的值 因为我是默认用 configure
| + | 角斗办法 : |
− | # base zabbix dir
| + | 自己选择相对应的版本下载 |
− | BASEDIR=/usr/local
| + | https://support.microsoft.com/zh-cn/help/2999226/update-for-universal-c-runtime-in-windows |
− | # binary file
| |
− | ZABBIX_SUCKERD=$BASEDIR/sbin/zabbix_server<pre>
| |
| | | |
− | ===fping的安装和使用详解===
| + | 其它小伙伴说的什么 重装 删除注册表并是是最佳 办法 |
− | <pre>http://rickie622.blog.163.com/blog/static/2123881120121121111720941/
| |
− | http://netsecurity.51cto.com/art/201101/242200.htm
| |
− | #当然 下载zip包也是可以的
| |
− | git clone https://github.com/schweikert/fping.git
| |
− | cd fping
| |
− | ./autogen.sh
| |
− | ./configure
| |
− | make -j2 && make install
| |
| | | |
− | #修改一下配置文件
| + | ==参考 == |
− | vim /etc/zabbix_server.conf
| |
− | #vim /usr/local/etc/zabbix_server.conf
| |
− | FpingLocation=/usr/local/sbin/fping</pre>
| |
| | | |
− | ===启动zabbix,并且添加开机自启动===
| + | https://helpx.adobe.com/cn/creative-cloud/kb/error_on_launch.html |
− | <pre>service zabbix_server start
| |
− | service zabbix_agentd start #启动服务
| |
| | | |
− | chkconfig zabbix_server on
| + | [[category:ops]] |
− | chkconfig zabbix_agentd on #开机自启动
| |
− | | |
− | 在Nginx服务中添加zabbix虚拟主机
| |
− | #vim /usr/local/nginx/conf/vhosts/monitor.conf
| |
− | | |
− | 这些都不要,不然没有web安装向导的
| |
− | #cd zabbix/conf
| |
− | #cp zabbix.conf.php.example zabbix.conf.php ;
| |
− | #chmod 777 zabbix.conf.php
| |
− | | |
− | iptables -I INPUT -p tcp –dport 80 -j ACCEPT
| |
− | | |
− | zabbix server is not running
| |
− | Zabbix Server is not running: the information displayed may not be current
| |
− | http://song49.blog.51cto.com/4480450/1200151</pre>
| |
− | | |
− | ===(4)设置zabbix服务IP和端口,name可以忽略===
| |
− | <pre>
| |
− | ps:
| |
− | post_max_size = 16M
| |
− | PHP option “max_execution_time” 30 300 Fail
| |
− | PHP option “max_input_time” 60 300 Fail
| |
− | PHP option “date.timezone” unknown Fai
| |
− | date.timezone = Asia/Shanghai
| |
− | | |
− | PHP option “always_populate_raw_post_data” must be set to “-1”
| |
− | | |
− | port 10051
| |
− | | |
− | Zabbix frontend is ready! The default user name is Admin, password zabbix.</pre>
| |
− | ===超级用户密码修改 ===
| |
− | <pre>
| |
− | 2.2 用户名第一个字母要大写 也就是Admin
| |
− | 默认的用户名:admin 密码:zabbix
| |
− | | |
− | 哪里改登录用户和密码呢
| |
− | use zabbix;
| |
− | select userid,alias,passwd from users; #查看
| |
− | | |
− | +--------+------------+----------------------------------+
| |
− | | userid | alias | passwd |
| |
− | +--------+------------+----------------------------------+
| |
− | | 1 | Admin | 5fce1b3e34b520afeffb37ce08c7cd66 |
| |
− | | |
− | | |
− | #如果为zabbix 3.0 直接这样就行了
| |
− | update users set passwd=MD5('12345') where userid=1;
| |
− | | |
− | | |
− | #zabbix 2.x
| |
− | 重新开个终端,生成一个MD5加密的密码,这里密码设置的是redhat
| |
− | | |
− | [root@localhost ~]# echo -n 12345678 |openssl md5 #-n就表示不输入回车符,不加-n,否则就不是这个结果了。
| |
− | (stdin)= 25d55ad283aa400af464c76d713c07ad
| |
− | | |
− | 接着上面的为admin用户设定一个密码
| |
− | | |
− | mysql> update users set passwd='25d55ad283aa400af464c76d713c07ad' where userid = '1';
| |
− | #或者直接使用update users set passwd=md5(“12345678”) where userid=’1′;
| |
− | Query OK, 1 row affected (0.01 sec)
| |
− | Rows matched: 1 Changed: 1 Warnings: 0
| |
− | | |
− | mysql> flush privileges;
| |
− | Query OK, 0 rows affected (0.01 sec)
| |
− | | |
− | mysql> quit
| |
− | Bye
| |
− | | |
− | zabbix登陆账户admin密码修改
| |
− | http://pvbutler.blog.51cto.com/7662323/1734003
| |
− | | |
− | yum install ntp ntpdate -y
| |
− | chkconfig ntpd on
| |
− | /etc/init.d/ntpd start
| |
− | | |
− | */30 * * * * /usr/sbin/ntpdate pool.ntp.org
| |
− | | |
− | 在29行这后添加
| |
− | sed -i ’29a user=mysql’ /etc/my.cnf
| |
− | sed -i ’29a character-set-server=utf8′ /etc/my.cnf
| |
− | sed -i ’29ainnodb_file_per_table=1′ /etc/my.cnf
| |
− | 重启mysqld</pre>
| |
− | | |
− | ===防火墙设置 ===
| |
− | <pre>这个要看一下先,尽量用严格些的防火墙设置
| |
− | | |
− | #on zabbix-agent
| |
− | | |
− | iptables -A INPUT -s zabbixserverip -p tcp -m tcp --dport 10050 -m comment --comment "zabbix_server listen " -j ACCEPT
| |
− | #iptables -A INPUT -s zabbixserverip -p tcp -m tcp --dport 10050 -m comment --comment "zabbix_agentd listen " -j ACCEPT
| |
− | | |
− | #这下面的防火墙rule 不要用
| |
− | vi /etc/sysconfig/iptables
| |
− | -A INPUT -m state –state NEW -m tcp -p tcp –dport 22 -j ACCEPT
| |
− | -A INPUT -m state –state NEW -m tcp -p tcp –dport 80 -j ACCEPT
| |
− | -A INPUT -m state –state NEW -m tcp -p tcp –dport 10050 -j ACCEPT
| |
− | -A INPUT -m state –state NEW -m tcp -p tcp –dport 10051 -j ACCEPT
| |
− | | |
− | /etc/init.d/iptables restart
| |
− | | |
− | 中文在右上角的用户里面哦
| |
− | | |
− | Starting php_fpm /usr/local/php/bin/php-cgi: error while loading shared libraries: libiconv.so.2: cannot open shared object file: No such file or directory
| |
− | failed
| |
− | | |
− | by default install the daemon binaries (zabbix_server, zabbix_agentd, zabbix_proxy) in /usr/local/sbin and the client binaries (zabbix_get, zabbix_sender) in /usr/local/bin.</pre>
| |
− | | |
− | ===4.0 5.2 图像显示字体乱码的解决方法===
| |
− | <pre>
| |
− | | |
− | 1.替换支持中文的字体
| |
− | #传输字体
| |
− | #50fbe46d4c5c zabbix/zabbix-web-nginx-pgsql:alpine-5.2-latest
| |
− | docker cp simkai.ttf 50fbe46d4c5c:/usr/share/zabbix/assets/fonts
| |
− | | |
− | cp /root/STKAITI.TTF /usr/share/zabbix/assets/fonts
| |
− |
| |
− | 2.修改字体配置 php文件
| |
− | #修改 指定的字体 或者直接把你的家体改成和默认同名,而默认的那个先删除 连重启都不用 反正在docker
| |
− | grep -rn BX_GRAPH_FONT_NAM /usr/share/zabbix/include/defines.inc.php
| |
− | 67:define('ZBX_GRAPH_FONT_NAME', 'DejaVuSans'); // font file name
| |
− | | |
− | 修改
| |
− | sed -i 's!DejaVuSans!simkai!' include/defines.inc.php
| |
− | define('ZBX_GRAPH_FONT_NAME', 'simkai');
| |
− | </pre>
| |
− | | |
− | ===zabbix-get===
| |
− | <pre>
| |
− | root@zabbix-server ~]#zabbix_get -s 10.3.10.139 -k "system.hostname"
| |
− | dev-hello-market
| |
− | | |
− | | |
− | 不过使用zabbix_get时必须开启客户端被动模式,要求暴露客户端监听端口。
| |
− | </pre>
| |
− | [https://blog.csdn.net/cx55887/article/details/83818696 自动化监控--zabbix-get安装使用详解]
| |
− | | |
− | ==第二 agent==
| |
− | <pre>
| |
− | | |
− | #4.0 #centos7 快速安装和自动配置 2019年 8月23日 星期五 11时45分01秒 CST
| |
− | | |
− | #国外
| |
− | rpm -ivh http://repo.zabbix.com/zabbix/4.0/rhel/7/x86_64/zabbix-release-4.0-1.el7.noarch.rpm
| |
− | | |
− | #国内
| |
− | https://mirrors.aliyun.com/zabbix/zabbix/4.0/rhel/7/x86_64/zabbix-release-4.0-1.el7.noarch.rpm
| |
− | | |
− | 手工直接添加 repo文件 ,如果有时 不小心 像上次删除了 reop文件 一样 ,搞半天
| |
− | | |
− | cat <<EOF > /etc/yum.repos.d/zabbix.repo
| |
− | [zabbix]
| |
− | name=Zabbix Official Repository - \$basearch
| |
− | baseurl=https://mirrors.aliyun.com/zabbix/zabbix/4.0/rhel/7/\$basearch/
| |
− | enabled=1
| |
− | gpgcheck=1
| |
− | gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
| |
− |
| |
− | [zabbix-non-supported]
| |
− | name=Zabbix Official Repository non-supported - \$basearch
| |
− | baseurl=https://mirrors.aliyun.com/zabbix/non-supported/rhel/7/\$basearch/
| |
− | enabled=1
| |
− | gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX
| |
− | gpgcheck=1
| |
− | EOF
| |
− | | |
− | curl https://mirrors.aliyun.com/zabbix/RPM-GPG-KEY-ZABBIX-A14FE591 \
| |
− | -o /etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
| |
− |
| |
− | curl https://mirrors.aliyun.com/zabbix/RPM-GPG-KEY-ZABBIX \
| |
− | -o /etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX
| |
− | | |
− | | |
− | | |
− | yum install zabbix-agent -y
| |
− | | |
− | yum install ntp -y
| |
− | timedatectl set-ntp true
| |
− | | |
− | HOSTNAME=prod-java-02
| |
− | | |
− | #config
| |
− | sed -i "s/^Server=127.0.0.1/Server=172.16.1.9/ " /etc/zabbix/zabbix_agentd.conf
| |
− | | |
− | sed -i "s/^ServerActive=127.0.0.1/ServerActive=172.16.1.9/" /etc/zabbix/zabbix_agentd.conf
| |
− | sed -i "s/^Hostname=Zabbix server/Hostname=test-market/" /etc/zabbix/zabbix_agentd.conf
| |
− | | |
− | | |
− | | |
− | #这个用了HOSTNAME 变量 而上面的要指定hostname
| |
− | sed -i 's/127.0.0.1/23.67.81.95/g' /etc/zabbix/zabbix_agentd.conf
| |
− | sed -i "s/Hostname=Zabbix server/Hostname=${HOSTNAME}/g" /etc/zabbix/zabbix_agentd.conf
| |
− | grep "^\s*[^# \t].*$" /etc/zabbix/zabbix_agentd.conf
| |
− | | |
− | systemctl enable zabbix-agent.service
| |
− | systemctl restart zabbix-agent
| |
− | | |
− | | |
− | 下面是老的信息 和解说
| |
− | | |
− | cat /etc/zabbix/zabbix_agentd.conf
| |
− | Hostname=主机名
| |
− | Server=zabbix server ip
| |
− | LogFile= 可以不改
| |
− | | |
− | ##最好这样3个
| |
− | Server=10.6.1.181
| |
− | ServerActive=10.6.1.181
| |
− | Hostname=zabbix-client-1
| |
− | | |
− | | |
− | #rpm -ivh http://repo.zabbix.com/zabbix/3.0/rhel/6/x86_64/zabbix-release-3.0-1.el6.noarch.rpm
| |
− | #rpm -ivh http://repo.zabbix.com/zabbix/2.2/rhel/6/x86_64/zabbix-release-2.2-1.el6.noarch.rpm
| |
− | #http://repo.zabbix.com/zabbix/2.0/rhel/5/x86_64/zabbix-release-2.0-1.el5.noarch.rpm
| |
− | | |
− | | |
− | rpm -ivh http://repo.zabbix.com/zabbix/3.0/rhel/7/x86_64/zabbix-release-3.0-1.el7.noarch.rpm
| |
− | | |
− | </pre>
| |
− | ===agent on debian===
| |
− | <pre>
| |
− | #用系统的源
| |
− | apt-get install zabbix-agent
| |
− | | |
− | | |
− | #config 其实和yum的也一样 只是启动不一样而已
| |
− | HOSTNAME=wiki
| |
− | sed -i "s/^Server=127.0.0.1/Server=207.148.106.229/ " /etc/zabbix/zabbix_agentd.conf
| |
− | | |
− | sed -i "s/^ServerActive=127.0.0.1/ServerActive=207.148.106.229/" /etc/zabbix/zabbix_agentd.conf
| |
− | sed -i "s/^Hostname=Zabbix server/Hostname=wiki/" /etc/zabbix/zabbix_agentd.conf
| |
− | | |
− | grep "^\s*[^# \t].*$" /etc/zabbix/zabbix_agentd.conf
| |
− | | |
− | service zabbix-agent start
| |
− | | |
− | | |
− | zabbix_get -s 138.68.59.0 -k "system.hostname"
| |
− | | |
− | | |
− | #用zbx的源
| |
− | https://repo.zabbix.com/zabbix/4.0/debian/pool/main/z/zabbix-release/zabbix-release_4.0-3+buster_all.deb
| |
− | dpkg -i zabbix-release_stretch_all.deb
| |
− | # apt-get update
| |
− | </pre>
| |
− | https://www.zabbix.com/documentation/3.2/manual/installation/install_from_packages/repository_installation
| |
− | | |
− | https://www.zabbix.com/documentation/4.0/zh/manual/installation/install_from_packages/rhel_centos#%E5%AE%89%E8%A3%85_agent
| |
− | | |
− | | |
− | 国内zabbix源总结
| |
− | | |
− | https://www.cnblogs.com/caidingyu/p/11423089.html
| |
− | | |
− | https://blog.cactifans.com/2019/01/21/Zabbix%E5%9B%BD%E5%86%85%E6%BA%90%E4%BD%BF%E7%94%A8/
| |
− | | |
− | ==docker zabbix 5.0==
| |
− | | |
− | [https://juejin.im/entry/57be598d0a2b58006cd17c0f 用 Zabbix 和 Docker 搭建监控平台]
| |
− | | |
− | 我的没有 zabbix web ui 明天搞一下
| |
− | 暴露端口 8888 用于访问页面,10051 用于和 Zabbix-agent 通信;
| |
− | | |
− | [https://www.zabbix.com/cn/whats_new_5_0 Zabbix 5.0 LTS新功能]
| |
− | | |
− | ==Usage==
| |
− | 添加主机要添加 模板 不然 在监控--主机那 图形没东西
| |
− | https://www.zabbix.com/documentation/current/manual/quickstart/host
| |
− | | |
− | == 故障及回顾==
| |
− | <pre>
| |
− | 问题1. zabbix server 没有打开 10051端口 前端图形没显示
| |
− | | |
− | 版本zabbix 2.2
| |
− | | |
− | | |
− | | |
− | 没有看到 10051 是因为
| |
− | | |
− | DBPassword=‘123’ 改为 DBPassword=123
| |
− | | |
− | | |
− | 日志查看
| |
− | tail /tmp/zabbix_server.log
| |
− | | |
− | 14659:20170525:171042.257 [Z3001] connection to database 'zabbix' failed: [1045] Access denied for user 'zabbix'@'localhost' (using password: YES)
| |
− | | |
− | | |
− | 正确如下
| |
− | [root@ zabbix]# netstat -nlpt
| |
− | Active Internet connections (only servers)
| |
− | Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
| |
− | tcp 0 0 0.0.0.0:10051
| |
− | </pre>
| |
− | === 经常报Zabbix agent on Zabbix server is unreachable for 5 minutes ===
| |
− | <pre>
| |
− | | |
− | 我上次的处理是 重启 zbx server 就好了
| |
− | | |
− | </pre>
| |
− | | |
− | [https://blog.csdn.net/weixin_34226706/article/details/85080769 解决Zabbix使用一段时间后总报Zabbix Agent不可到达的问题]
| |
− | | |
− | [https://blog.csdn.net/weixin_33721344/article/details/92968417 防火墙导致 zabbix监控大批量报警zabbix agent on **** unreachable for 5 minute]
| |
− | | |
− | ==参考==
| |
− | | |
− | [https://www.howtoforge.com/tutorial/install-zabbix-monitoring-server-and-agent-on-debian-9/ Install Zabbix Monitoring Server and Agent on Debian]
| |
− | | |
− | [https://www.cnblogs.com/yanjieli/p/13651859.html zabbix--5.0.2部署使用手册 ]
| |
− | | |
− | [https://blog.csdn.net/weixin_42743410/article/details/81482728 zabbix 3.0使用教程]
| |
− | | |
− | [http://blog.51cto.com/guoxh/2089204 Zabbix 3.0 详解:从添加主机到发送报警通知]
| |
− | | |
− | [https://my.oschina.net/zhouyuntai/blog/1788830 Zabbix监控系统 (3) 之 添加自定义监控项目、配置邮件告警、测试告警]
| |
− | | |
− | http://blog.linuxchina.net/?p=1711
| |
− | | |
− | [https://www.cnblogs.com/enjoycode/p/zabbix_3_installation_on_centos_7.html Zabbix 3.0 with apache安装笔记]
| |
− | | |
− | [https://www.cnblogs.com/zhenglisai/p/6547402.html 【zabbix】自定义监控项key值]
| |
− | | |
− | | |
− | [https://blog.csdn.net/zhengchaooo/article/details/79499991 zabbix添加自定义py脚本]
| |
− | | |
− | [[category:zabbix]]
| |